The T59 Insulated Cable Staple Gun is the pro’s choice when installing data and communication cables. Whether working with Cat 5 cables, RG-59, or RG-6 cables, this tool will secure wires without crimping. A grooved wire guide tracks along the cable, speeding the work and preventing damage.
- Uses T59 insulated staples in 3 sizes : 591168 (1/4 in. x 1/4 in.), 591188 (1/4 in. x 5/16 in.), 591189 (5/16 in. x 5/16 in.)
- Tool features chromed steel housing and hardened steel working parts
- Features a comfort grip for all day ease of use
- Offers a reliable and durable rear-load magazine
- Jam-resistant mechanism provides consistent performance
- Works with cables up to 5/16 in. Dia
Aubree Leffler (verified owner) –
very easy to work with i like the design and the ease of tool
Jeramy Heller (verified owner) –
I am absolutely thrilled with the purchase. It makes installation of cables incredibly fast and easy. It reduces the need to get out a hammer and Roka tacs or drills with flex clips. Highly recommended for installers.
Carolanne Wolf (verified owner) –
The T59 is a tool that is built with quality. I quickens any wire attachment job with a neat professional look. I wish it had a little more power to sink the staples in deeper in some woods. But the attachments were sufficient
Carli Brakus (verified owner) –
Good for coax instillation. The only concern is it takes a lot of force to use it compared to all of the other types of staplers I have used.
Tristian Gottlieb (verified owner) –
I am a cable technician and this tool makes running cat5 lines 10x faster then using flex clips and a drill. Best purchase very well built and reliable.
Karolann Paucek (verified owner) –
Love the built in guide. Heavy duty and fast to load. Would like a little more power in the handle.
Landen Dickinson (verified owner) –
This is about the only tool on the market with properly insulated staples. So many others are just lacquered metal which will fail within a few months. Incredibly versatile, producing a neat finish which is passable with most decors. The staples are curved, so don’t compress the outer braid, which can interfere with signal transmission on aerial leads. The only niggle I have is that there simply aren’t enough different sizes of staples for this wonderful gun. Some smaller ones would be really nice.
Milan Gottlieb (verified owner) –
The T59 stapler made running Cat5e and RG6 cable in my attic an easy task. The tool operates smoothly and is simple to use in one hand. It’s a tad heavy but the stapler is very solid so I wasn’t concerned about dropping it a few times. The stapler did jam once but clearing the jam was simple. I love that I can pull the wire through the plastic staple so it’s not taught or pinching the wire.
Camille Rau (verified owner) –
I highly recommend this staple gun, great for coax wiring
Maida Marvin (verified owner) –
Used to install cabling for theatre show installation. Quick and easy to keep cabling neat and tidy.
Manley Casper (verified owner) –
The T59 is an excellent stapler for Co-Ax cables and other low voltage cables that once you become familiar with the proper handling and a system laid out you can get the job done in half the time with no worries of damaging the cable and a job that has a professional appearance.
Grant Romaguera (verified owner) –
I use it mainly for utp and coaxial cabling, with its protection I find it excellent to avoid causing damage to the cable.
Myles Moen (verified owner) –
If you like the T50 for general tacking, you’ll like the T59 for tacking coax and UTP cable. Just get the right staples for the type of data cables you’re tacking down. Just like the T50, the spring in this tacker is stiff. That’s good for driving the staples but it sometimes makes for a two-handed push on the lever and that’s not a good “ease of use” factor if you’re trying to hold a cable in place with one hand while squeezing the handle with the other hand. If Arrow would come out with a Li-ion rechargeable battery-based tacker that would take both T59 and T50-series staples and keep their quality level high, they’d really have a killer product!
Jalyn Boyer (verified owner) –
Solid in a way that we used to get in tools only very rare in the 22st century.Tricky thing using insulated staples on CAT6 but this never cause concern about pinching the cable.The only thing that could be improved is the staple loading retainer/tensioner – it works fine, but I would prefer a captive design – but I might be a perfectionist 😉
Iva Romaguera (verified owner) –
Well designed, well built. Heavy duty. Last purchased lasted several years.
Marcellus Hyatt (verified owner) –
Just the right tool for securing coaxial cable. Had to make two long runs of new coaxial cable in my crawl space. Using the coaxial cable staples made securing the cables easy and saved me a great deal of time. Highly recommended.
Stephon Beier (verified owner) –
I bought this stapler and the insulated staples to go with it. It works great for the applications i need it for.
Annie Jerde (verified owner) –
A bit on the heavy side but that’s from how solid and well built it is. Perfect for ethernet installations. I own a powershot 5700 as well and really like its forward pump action and wish this gun had it too but otherwise a great stapler.
Ryder Schroeder (verified owner) –
I purchased this for stalking wire but this worked great for putting staples up for Christmas lights to zip tie to. Great product!
Nathaniel Borer (verified owner) –
I am so happy with my T59 Fastening Gun that I am happy to recommend that others pick up one of these quality tools. I can’t say enough of how fast you can secure cables with this tool. Talk about a time saver. Not only that I don’t have to worry about damaging the cable.