Avanti Pro 3 in. x 1/16 in. x 3/8 in. Metal Cut-Off Disc (5-Pack)
$6.27
AvantiPRO metal cut-off discs are made for cutting and slotting metal, including sheet metal and roof decking. They provide high performance and durability to complete your metal project. For use when cutting metal with drills and pneumatic cutters.
In stock
Description
AvantiPRO metal cut-off discs are made for cutting and slotting metal, including sheet metal and roof decking. They provide high performance and durability to complete your metal project. For use when cutting metal with drills and pneumatic cutters.
- Aluminum oxide formulation for fast material removal and extended cutting life
- For use on metal applications
- Diameter – 3 in.
- Thickness – 1/16 in.
- Arbor – 3/8 in.
- Type 1 flat
- Ideal for cutting
- Tool use drills and pneumatic cutters
Additional information
| Weight | 0.033 lbs |
|---|---|
| Dimensions | 5.51 × 0.51 × 3.15 in |
| Abrasive Material | Aluminum Oxide |
| Application | Medium Duty |
| Arbor Size | 3/8 in. |
| Arbor Size (in.) | 3/8" |
| Backing Material | Other |
| Grit | 36 |
| Ideally Used With | Angle Grinders |
| Kit | No |
| Model | PBD030063105F |
| Package Quantity | 5 |
| Power Tool Accessory Type | Sanding/Grinding/Polishing Accessory |
| Product Length (in.) | 3 |
| Sanding Grade | Coarse |
| Sanding, Grinding and Polishing Accessory Type | Grinding/Cut-Off Wheels |
| Tools Product Type | Power Tool |
| Wheel Diameter (in.) | 3" |
Reviews (63)
63 reviews for Avanti Pro 3 in. x 1/16 in. x 3/8 in. Metal Cut-Off Disc (5-Pack)
Only logged in customers who have purchased this product may leave a review.
Related products
Abrasives
Model# 48-52-5030
Abrasives
Model# 48-52-5010
Abrasives
DIABLO 4-1/2 in. x 5/8 in. 50-Grit Grinder/Sander Conversion Kit
Model# DCP045VGPS01G
Abrasives
DEWALT 4-1/2 in. x 1/4 in. x 7/8 in. Concrete/Masonry Grinding Wheel
Model# DW4524
Abrasives
DIABLO 5 in. Random Orbital Universal Conversion Sanding Disc
Model# DCP050CONH01G
Abrasives
Model# DCX070060B01F
Abrasives
DIABLO 5 in. General Purpose Sanding Disc Project Pack with Hook and Lock Backing (7-Piece)
Model# DCD050VGPH07G
Vella Bergstrom (verified owner) –
Worked very well for making cuts in tight spaces
Yadira Keebler (verified owner) –
blown away by the versitility of this cutting disc plus it being so compact makes it even better that it doesn’t take up any space ….
Kara Stroman (verified owner) –
I had to cut some 1/16″ sheet metal in an awkward spot, where I couldn’t get in with a hacksaw. It did the job, but was a little slow because I was using an electric drill. It would have been faster if I had a grinder, which has a much higher rpm.
Denis Becker (verified owner) –
Did the job I needed done–cutting two 3/4″ metal conduits flush with concrete. But it took two discs to accomplish it.
Alize Stark (verified owner) –
Works great, cuts through steel like it was butter.
Eldon Heaney (verified owner) –
This is a metal cut-off disc that fits a drill – worked ok, though the small diameter of the disc means lower linear speed at the edge, and therefore much slower cutting than a real cut-off saw would do. I was only cutting off a couple of screw ends that were too long for their material, so the blades worked fine for me.This is a good light-duty metal cutting system for a drill – everyone with a drill should have one!
Margaretta Bode (verified owner) –
Discs go away pretty quickly when cutting automotive sheet metal especially if your are going across welds. Haven’t found any that are any better or worse. Requires a slow rpm for cutting sheet aluminum. Recommend jig saw for that.
Leo Lakin (verified owner) –
Yes cut and lasted longer than I thought would have
Brady Zboncak (verified owner) –
It is a good product value compared to performance.
Brain Kuhic (verified owner) –
Worked perfectly on a PVC pipe, saved me to cost of having to buy another tool.
Elvie Kozey (verified owner) –
Just cutting aluminum with a drill and they wear quickly. They do work but the 5 pack doesn’t last long.
Ahmed Gulgowski (verified owner) –
heavy duty disc for small applications.
Darrel Hahn (verified owner) –
Worked well to solve my access problem. I needed to remove a panel to get to another part.
Mona Anderson (verified owner) –
Very convenient for small jobs
Santa Oberbrunner (verified owner) –
Cut right through a lug nut that I couldn’t get off.
Jonathon Kihn (verified owner) –
They work great, they are holding up pretty good so far. Very happy with the quality.
Elyssa Eichmann (verified owner) –
This metal cut off disc is really easy to assemble and use, but it takes more than one to cut off a bolt that attaches the shackle bracket to my Ranger. If you press too hard on the disc, it will wear unevenly an not work well. It works best if you let it do the cutting and don’t try to hurry it. The pictures show the maximum usable disc for my application. Buy extra.
Torey Buckridge (verified owner) –
Cut off wheel didn’t last long.
Tremaine Stracke (verified owner) –
I used these discs to cut through bolts and also nuts
Cynthia Vandervort (verified owner) –
Work as described for my Milwaukee M12 cut off tool.