BESSEY 90-Degree Corner Clamp
$14.97
Corner Clamp from BESSEY comes with open design and independently adjustable spindles to join different size work piece.
In stock
Description
The BESSEY WS-1 light duty 90 degree angle clamp will allow one to do miters and butt joints and will leave the joint fully exposed for correction, doweling, gluing or nailing. The BESSEY WS-1 miter clamp has independently adjustable spindles to allow one to join work Piece of different widths.
- Clamps at fixed 90 degree angle for miter or butt joints
- Mounting holes to fix to work surface
- Open design allows ample clearance to screw, dowel or staple material together while gluing
- Independently adjustable spindles allow for joining of two differently sized work pieces
Additional information
| Weight | 0.5 lbs |
|---|---|
| Dimensions | 5.85 × 0.90 × 8.30 in |
| Clamp Type | Angle/Corner |
| Clamping Strength (lb.) | 200 |
| Hand Tool Type | Clamp |
| Individual/Set | Individual |
| Jaw Width | 1.625 |
| Material | Steel |
| Maximum Opening (in.) | 2.875 |
| Model | WS-1 |
| Throat Depth | 0.5 |
| Tools Product Type | Hand Tool |
Reviews (72)
72 reviews for BESSEY 90-Degree Corner Clamp
Only logged in customers who have purchased this product may leave a review.
Related products
Fastening Tools
Model# TT21
Fastening Tools
Model# 480
Fastening Tools
Yost 6 in. High Visibility All Steel Utility Workshop Bench Vise
Model# 906-HV
Fastening Tools
Model# TR110
Fastening Tools
Model# DWHTHT450
Fastening Tools
DEWALT 6 in. 100 lbs. Trigger Clamp with 2.43 in. Throat Depth
Model# DWHT83139
Fastening Tools
Model# HT50P
Fastening Tools
Model# 63302
Marta Greenfelder (verified owner) –
help me make mitered boxes go a lot better and held the sides so i could put more clamps on after the glue up. looking to get more as soon as I can.
Kenneth Schuster (verified owner) –
Clamp is difficult to use. The wood have to be manually maneuver otherwise would comes up on one side as pressure doesn’t apply evenly on both metal plates. The metal plate where the wood comes in contact with the clamp was so small that it does not push in enough if you have a long plank of wood. Only good for small picture frames and such. Not for table/bench building.
Golda Tillman (verified owner) –
Came in helpful holding the wood when screwing them in
Stan Dicki (verified owner) –
Just the tool we were looking for in building wood furniture!
Mariano Osinski (verified owner) –
Great for framing.
Ignatius Rath (verified owner) –
These clamps are pretty small, but built solidly! Very easy to use. The handles are very small and could be made a bit bigger. Can hurt your fingers when squeezing tightly. Although great pressure when tightening corners during woodworking projects. Great at holding projects together if you are screwing or gluing. A bit pricey when you buy in four to make a box or in pairs, but you get what you paid for. I’d recommended.
Emmalee Larkin (verified owner) –
Great product helped me fixed 5 things already
Dorcas Haley (verified owner) –
Pretty well made and does what was intended
Jazmin Robel (verified owner) –
They worked well on my table
Frank Hirthe (verified owner) –
It’s solid and made well. It also works on more sizes than the plastic ones I was looking at.
Rudy Brown (verified owner) –
Really good tool to use when working with smaller pieces of wood. Works entirely as expected
Madaline Medhurst (verified owner) –
Great clamps, I just ordered 2 more!
Cassie Schmeler (verified owner) –
The corner product is Ok…. Mainly used ok on smaller projects.
Syble Nienow (verified owner) –
Had to made a bunch of boxes out of plywood and this tool helped me make them quickly
Cloyd Bruen (verified owner) –
Descent clamp. Ends have a little looseness in them but tighten up square and solid.
Evans Lind (verified owner) –
My frames was a little larger than it would open so I had to figure another way to secure the frame.
Krystina Paucek (verified owner) –
Perfect tool for beginners. Awesome to square shelves
Annabell Pagac (verified owner) –
Good quality, nice tool. I bought it because I was making a mirror frame from window/door casing trim, but found that even though it’s the biggest capacity available it’s too narrow by about 1/2” for the job. I’ll keep it for future use – you never have too many tools.
Newell Littel (verified owner) –
The clamps met expectations; A little more vertical dimension to the clamping surfaces would be helpful I believe. Good value. I would expect the more expensive versions would have additional capabilities but these met my needs
Forrest Reilly (verified owner) –
Great clamps. Save your self the time and just get 4