BORA Glass Filled Nylon Track Clamp Set for WTX or NGX Saw Clamp Edges (2-Piece)
$24.94
Provide an essential and ultimate addition to your construction application with this affordable BORA Track Clamp Pair for WTX or NGX Saw Clamp Edges.
In stock
Description
The Track Clamp allows you to see and use your WTX or NGX Clamp Edge saw guide from a whole new angle. It used to be that you could only cut 90° angle with the BORA Clamp Edge. Now you can make any angle you want, thanks to the Track Clamp. Cutting a 35° angle. Go for it. A 67° angle. Easy. Even a 83.75° angle. If you really want to, the Track Clamps make it possible.
- Makes any angle fast, easy and accurate
- Easy to adjust and use with fast-acting lock nut
- Helps quickly process panel material
- Slides into both top and bottom of track for multi-purpose functionality
- Works with WTX and NGX clamp edge saw guides
Additional information
| Weight | 0.5 lbs |
|---|---|
| Dimensions | 6.25 × 5.50 × 1.75 in |
| Clamp Type | Toggle |
| Color Family | Orange |
| Hand Tool Type | Clamp |
| Individual/Set | Set |
| Model | 542011 |
| Number of Pieces | 2 |
| Tool Set Type | Clamp/ Vise Sets |
| Tools Product Type | Hand Tool |
Reviews (86)
86 reviews for BORA Glass Filled Nylon Track Clamp Set for WTX or NGX Saw Clamp Edges (2-Piece)
Only logged in customers who have purchased this product may leave a review.
Related products
Hand Tool Sets
Model# 90402
Hand Tool Sets
Model# 22
Hand Tool Sets
Model# 63518
Hand Tool Sets
Model# 68221
Hand Tool Sets
Klein Tools 3-Piece Fully Reversible Ratcheting Offset Box Wrench Set
Model# 68244
Hand Tool Sets
Model# 437-0
Hand Tool Sets
Model# 35202
Hand Tool Sets
Model# 33
Haskell Gottlieb (verified owner) –
I really could have used this when I was building 4 barn doors for my basement. But I have two more to go and this will make the job much easier. It’s a pretty simple setup – the bars clamp easily to the work piece. And if it’s just straight cuts you can get away without the sled, just keep your saw pressed up against the track. The sled is a little tricky to attach straight but that’s more due to me being new to using a track saw. Couple of YouTube videos later and it was easy to figure out. And using the sled will ensure the saw doesn’t stray. All parts are very sturdy, very little flex in the bars. And the additional track clamps are a great addition – you can use bar clamps or C clamps, but to have clamps purpose built for this is much better. All in all, this is hands down better than screwing in scrap pieces of wood to serve as my guide and then having to fill holes. My only complaint, like others, is the instructions. Definitely not the easiest to follow.
Nikolas Lockman (verified owner) –
This Bora clamp deluxe just make my jobs so much easier I do carpentry, cabinets, and other wood work, now I can make my cuts much more straight, or in any angle, the with extension you can cut a plywood 8 feet long or you can take the extension off and do smaller cuts, the saw plate is included and so easy to attach a circular saw, you can move it to different measurements positions to make your cuts, definitely I will recommend this Bora clamp deluxe for smaller or big jobs
Jose Ward (verified owner) –
I think this is a great tool, especially when you purchase NGX saw plate to go with it. However, see my review of the saw plate. It only comes with one 55 inch Non Chip Strip. YOU NEED A SECOND ONE! This is essential for aligning the Clamp Edge when ripping full sheets of plywood. This is not noted anywhere in the product description and HD doesn’t offer the NCS as a separate purchase option.
Vidal Wolf (verified owner) –
Good quality product for the price. Maybe not as nice as a good track saw, but for the few projects I do each year it works fine. Allows straight cutting of 4×8 sheets in both directions. It works best with saws that have a flat metal base on top. My Porter Cable saw has ridges on top of the base which creates some problems. I ended up purchasing a Dewalt saw as the base is flat on top. I’d recommend getting a separate 4′ section for cross cutting sheets of plywood (4′ direction) to avoid having to keep taking the guide apart. Also the saw sits fairly high off of the wood so the cutting depth is reduced quite a bit. A 6 1/2″ blade would be marginal.
Cory Cruickshank (verified owner) –
The clamp is excellent and I expect to use it often. My only complaint is that the adhesive on the tape strip is not strong and the strip tends to peel off completely.
Kurt Leannon (verified owner) –
Tried to use it over the weekend on a few sheets of plywood. It seems as if not completly square. There does not seem to be any adjustments to square it off perfectly.