BORA NGX Saw Plate with 55 in. Non-Chip Strip
$53.63
Instantly speed up your truss and rafter connections easily and safely with the help of this BORA NGX Saw Plate with NonChip Strip.
In stock
Description
No matter how accurate your cuts are, ugly tear-out can still happen. End tear-out for good with the NGX Saw Plate and Non-Chip Strip, specifically designed as part of the BORA NGX Clamp Edge System. With its easy-to-use, intuitive design, you can apply the strip and mount your saw to rip or crosscut a board in no time. An especially helpful feature of the saw plate is the all-new non-chip strip, which saves your boards from tear-out. Simply press this self-adhesive strip onto the clamp edge and cut—the excess width of the strip will come off so the edge of the non-chip strip sits flat against your blade and is parallel to your clamp edge.
- Fixed center molded channel reduces blade offset and guesswork
- Self-adhesive non-chip strip attaches to the bottom of your NGX clamp edge and reduces top edge tear-out for a smooth finish
- Quick-release clamps are adjustable so your saw goes on and off the plate effortlessly
- Aluminum guide rails position your saw accurately every time
- 3 points of contact hold the saw securely while cutting
- Fits right- or left-handed saws
- Part of the NGX Clamp Edge System to cut and rip sheets and boards
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
Additional information
| Weight | 1.8 lbs |
|---|---|
| Dimensions | 8.00 × 14.00 × 2.00 in |
| Color Family | Silver |
| Ideally Used With | Circular Saws |
| Material | Aluminum |
| Model | 544001-E |
| Power Tool Accessory Type | Other Accessory |
| Product Length (in.) | 55 |
| Tools Product Type | Other |
Reviews (86)
86 reviews for BORA NGX Saw Plate with 55 in. Non-Chip Strip
Only logged in customers who have purchased this product may leave a review.
Related products
Saw Tracks
WEN 27.5 in. Track Saw Track Guide Rail with Adapters (2-Pack)
Model# 36027-2P
Saw Tracks
Model# PM-7000i
Saw Tracks
Model# 10715B
Saw Tracks
Model# DWS5022
Saw Tracks
Model# KMS8000
Saw Tracks
General Tools 20 in. Heavy-Duty T-Track Professional Face Frame System
Model# 856T
Saw Tracks
Model# TTSTC
Saw Tracks
Triton 2 in. x 27.5 in. Track Pack with Connectors for Track Saw
Model# TTSTP
Alanis Stracke (verified owner) –
It took me a little while to understand on how to mount my saw but once the light bulb in my head turned on it was easy. One of the clamps broke and sent Bora a picture of it and they sent me a new one right away. Good Customer Service!!!!!!!!!!
Kade Turcotte (verified owner) –
So my Dad had a guide for his circular saw which was two pieces. It was a pain to setup & get straight. I ordered this guide because it was one piece & can be setup with one hand as I demonstrate in the video below. When cutting thick plywood, using one of these guides is way easier & more accurate than trying to rip the material on a table saw or using a circular saw freehand. Mine came with a sled, which can be used in conjunction with the guide to make the cutting easier & more accurate.
Jolie Collier (verified owner) –
Great for cutting sheet goods. The only downside is that it’s not easy to connect & disconnect to the extension.
Dangelo Smitham (verified owner) –
Excellent alternative to buying a track saw system. I already had an old circular saw that was collecting dust, so it was nice to be able to put it to use. It does require some setup, so make the extra effort so your cuts are straight and true.
Florence Harvey (verified owner) –
I set this up today to test it out, First I removed my Craftsman circular saw from another brand track saw base. Then I installed it on the Bora base using the instructions that came with the set. First problem was the instructions are not the best but still able to figure things out. I set the tack across my table saw and placed the base on the track then the saw on the base. This let me adjust it to the track so the saw is not skewed on the base. After installing the saw on the base I installed the tear out strips. They were very easy to install and fit perfect to the track. Then I placed the base with saw on the track again and checked that the blade would ride along the edge of the tear out strip all the way down both pieces of track.. Its now ready to use. I took a piece of 3/4″ red oak plywood that was 76″ long and 24 1/2″ wide and cut 1/2″ off the whole langht so I had 76″ X 24″. I don’t have alot of room to work so I would rip my sheets of ply out side using my truck and a saw horse. but this time I just layed it across my table saw and clamped it down and cut it. The two piece of track connected together and the bora track layed down and clamped with the slide clamp only it was solid as a rock it was not moving. I placed the base and saw on the track and made a perfect cut and my work piece was nice and clean no tear out at all. Now with it 24″ wide I needed 2 pieces 28″ long so I took off the extension track and just use the 1 piece to cut across the width to cut off 28″. Now the left over piece I took and cut off another 28″ langth with my table saw then I compared the 2 pieces and they both were perfect and match up they both were square to each other. I find the base rides on the track very smooth and it does not skew any when you stop and start again. There is no slop in the base when riding along the track. I did not use the 2 track clamps at this time but thay are great I checked them out and thay adjust great they fit the track with no problems and I know I will use them alot in the future. Now with all that said the only thing I can see a problem with is the nuts on the bottom of the base. when I went to adjust the lock down track on the base the nuts turned in the grove. This should be a long nut made with flat stock so it can’t turn in the grove not a hex nut that will ware the plastic if its tighten and loosen to maney times. For me its ok I am leaving the saw set up. Even with the one flaw above this is easer and better than the other brand I have been using that I had to go buy clamps to hold it down to keep it from walking on cuts. Its also harder to set up for long cuts so The Bora clamp edge deluxe set is a Plus plus for me. Now all I need is a Bora Centipede so I dont have to use my truck as a table.
Rickey White (verified owner) –
It’s a bit difficult to set up. A lot of folks recommend using it with a dedicated saw and keeping that saw attached to the plate, which I think would help. But it makes excellent straight cuts, and sets up much faster than my old straight edge.
Elroy VonRueden (verified owner) –
This clamp/guide is invaluable for table saw free environments. I couldn’t recommend it enough!
Teresa Pouros (verified owner) –
I have used this quite often. The only problem that I had was with the base when I attached my saw I was trying to cut the edge of my countertop which was 1 1/2″. My 7 1/2″ blade wouldn’t cut deep enough to get the whole edge.
Jerald McCullough (verified owner) –
I think this is a great tool, especially when you purchase NGX saw plate to go with it. However, see my review of the saw plate. It only comes with one 55 inch Non Chip Strip. YOU NEED A SECOND ONE! This is essential for aligning the Clamp Edge when ripping full sheets of plywood. This is not noted anywhere in the product description and HD doesn’t offer the NCS as a separate purchase option.
Araceli Terry (verified owner) –
Super handy for trimming doors to fit after a whole home flooring project.
Kayleigh Borer (verified owner) –
This clamp edge guide is a fantastic addition to any shop! It is surprisingly light weight, made from extruded aluminum, but very durable. The clamps are a strong plastic material, and the clamp surfaces that touch the material to be cut have a rubber, non-abrasive grip surface.The clamp is ~50″, easily able to be used to rip a full sheet of plywood. One of the clamp ends slides on an internal track making it easily adjustable. That means the clamp can be used to cut any width of wood from ~48″ to 3″ wide. Overall a very useful tool for making long, straight cuts!
Caesar Marks (verified owner) –
This Bora clamp deluxe just make my jobs so much easier I do carpentry, cabinets, and other wood work, now I can make my cuts much more straight, or in any angle, the with extension you can cut a plywood 8 feet long or you can take the extension off and do smaller cuts, the saw plate is included and so easy to attach a circular saw, you can move it to different measurements positions to make your cuts, definitely I will recommend this Bora clamp deluxe for smaller or big jobs
Andy Monahan (verified owner) –
I really could have used this when I was building 4 barn doors for my basement. But I have two more to go and this will make the job much easier. It’s a pretty simple setup – the bars clamp easily to the work piece. And if it’s just straight cuts you can get away without the sled, just keep your saw pressed up against the track. The sled is a little tricky to attach straight but that’s more due to me being new to using a track saw. Couple of YouTube videos later and it was easy to figure out. And using the sled will ensure the saw doesn’t stray. All parts are very sturdy, very little flex in the bars. And the additional track clamps are a great addition – you can use bar clamps or C clamps, but to have clamps purpose built for this is much better. All in all, this is hands down better than screwing in scrap pieces of wood to serve as my guide and then having to fill holes. My only complaint, like others, is the instructions. Definitely not the easiest to follow.
Colby Robel (verified owner) –
Tried to use it over the weekend on a few sheets of plywood. It seems as if not completly square. There does not seem to be any adjustments to square it off perfectly.
Jerome McClure (verified owner) –
I love the clamp and rails.I was impressed with this edge clamp set. I have wanted one for a while now and was happy to get this one. The 50″ rails (2) have a good weight to them and when connected to make a 100″ single rail is very sturdy.I gave this set 4 stars because I didn’t like the setup of the saw attachment. I watched a couple of You Tube videos about connecting the saw to the plate and then to the rails. The directions included with the set also were a little vague for the first time user. After watching the videos, I decided to just use the rails. I do plan on using the saw plate attachment in the future, but didn’t want to take the time to figure out all the measurements. I will update my rating to 5 if I find the saw plate makes a great improvement. I did like the two extra clamps that are included in this set. I’m planning on building a shed in the near future and already see that some of the cuts will be improved with the versatility of these two clams to secure the rails. I am happy with this set and will be using it many times in my future. It’s a great buy and I want to learn how to use the saw plate. I think it will be a welcome piece once I figure out how to use it.
Antonietta Hagenes (verified owner) –
This is a great tool. I’ve been fiddling for years with just clamping a long piece of straight wood to plywood when I need to make cuts with any precision. So, three clamps and a bulky piece of wood. It works, but it’s a pain. This tool allows you to clamp on sheet goods up to 4 feet wide and get cutting right away. It seems to clamp on consistently at a right angle, but I’m a bit compulsive, so I do check each time. You will have to do some calculation to know how far to set the clamp from where you need to cut–you have to calculate some offset from your saw’s guide. Unless–you can get the Bora Saw Plate that fits with this. If you have the saw plate, you fit your circular saw to the plate, attach an additional guide to the clamp edge, and after setup, you can set the guide to where you want your cuts. This speeds up the process like crazy, and basically gives you the capabilities of a track saw from your circular saw. Great stuff.
Ethelyn Mitchell (verified owner) –
THis is a much better system than my fist clamp on guide. The clamp on to the board section is mostly aluminum. The saw sled is mostly plastic. My only problem was locating the proper tool to get the sled to fit my circular saw. Once that was sorted out it was smooth sailing. This is much more precise than the early model I had. The light weight will also make this tool very portable. That only leaves me looking at the new battery operated saws.
Franz Gottlieb (verified owner) –
Purchased this kit to augment a WTX have owned for many years. Clamp mechanism of NGX is much better design IMO and is easy to set. Using the saw sled with Mak 18V LXT sidewinder and this combo works well to add and easy to set up track saw rig for panel work in my pocket shop.
Geovany Bahringer (verified owner) –
Saw plate gets hung up on track guide joint screw heads.
Jewel Willms (verified owner) –
This tool is like having a portable track saw. I most recently used it for ripping and cross cutting sheets of plywood and 4’x8’ PVC trim sheets. And using it with the caddy/sled/sawplate/whatever-you-want-to-call-it, which attaches to the saw, sure beats my previous method. No more fighting an imperfect 2×4 to stay flush. The caddy fits on two of my 7 1/4” saws (one corded, one cordless), as well as my little 6 1/2” cordless. At first I struggled to attach the saws, but that was because I wasn’t lifting the blade. Once attached, you lower the saw blade to make sure there’s reasonable cutting depth (keep in mind the caddy’s clamps should be placed as to not interfere with the saw’s motor/housing etc… I made that mistake too). That brings me to the paper instructions…. Would have been nice if they were clearer. Bora’s website wasn’t any help either… I had to goto youtube to figure it out. There are a lot of fine adjustments required to get the saw perfectly straight in the caddy, so I’ve left my corded saw in it so it’s ready to go for the next project.The guide comes in two pieces, which when combined provides 100”. Keep in mind when you only use the main piece you’ll get a little less than a 50” cut due to the clamps on each end. Would have been nice if this guide had quick change/setup capability to go from 55” to 100”. Assembly to 100″ requires removing a few screws and then screwing the ends together. Of course, then you have to reverse the process to take it apart for storage. I greatly appreciate the hanging hooks on both guides since I can get them out of the way when not in use.The 50” and 100” non-chip adhesive tape strip, is a nice idea in theory. In practice, it’s useless in my opinion unless you (a) adhere it perfectly straight (although it will be kinda straight if not perfect after the first cut); and (b) make only straight cuts. If you do a beveled cut you’ll cut the tape unless you flip the whole sled contraption around to the other side of the track…. and doing so changes the blade’s position. I haven’t tried the two additional track clamps for angle cutting yet because I haven’t needed angular cuts. To attach the track clamps you have to remove the ends and slide them onto the track. Overall this seems well built and it’s a very helpful tool for the DIYer like me who wants the advantages of a track saw. I’m pleased with it.