BORA NGX 55 in. Non-Chip Strip Replacement
$21.38
Open up your favorite wine bottle with utmost style and add life to your party by choosing this fantastic BORA NGX NonChip Strip Replacement.
In stock
Description
The non-chip strip makes it easy to eliminate tear-out. Simply press this self-adhesive strip onto the clamp edge and cut. The excess width of the strip will come off so the edge of the non-chip strip sits flat against your blade parallel to your clamp edge.
- Self-adhesive non-chip strip ensures smooth cut with reduced tear-out
- Adheres to bottom side of BORA clamp edge for a clean cut
- Part of the BORA clamp edge system to cut and rip sheets and boards
- Sits flat against blade after initial cut to provide clear cut line of visibility
Additional information
| Weight | 0.02 lbs |
|---|---|
| Dimensions | 55.00 × 0.87 × 0.06 in |
| Color Family | White |
| Ideally Used With | Circular Saws |
| Material | Plastic |
| Model | 544003 |
| Power Tool Accessory Type | Other Accessory |
| Product Length (in.) | 55 in |
| Tools Product Type | Other |
Reviews (86)
86 reviews for BORA NGX 55 in. Non-Chip Strip Replacement
Only logged in customers who have purchased this product may leave a review.
Related products
Saw Accessories
Model# KMS7102
Saw Accessories
Model# DW3278
Saw Accessories
Model# KMS7213
Saw Accessories
Model# KMS7200
Saw Accessories
Model# 530401
Saw Accessories
Triton 10 in. 15 Amp Contractor Saw Module for Use with WorkCentre
Model# TWX7CS001
Saw Accessories
Model# 365595
Saw Accessories
Model# DWS5100
Avis Rice (verified owner) –
It makes cutting perfect straight lines with a circular saw easy. This will cut across the 48” side of plywood or any sheet good. You can also add another 50” section and rip the full length of a sheet of plywood. Cheaper than a track saw.
Kimberly Gibson (verified owner) –
This guide is easy to use for making long crosscuts of plywood. Very light, but held up well as I cut up seven sheets of plywood to build four cabinets
Genoveva Barrows (verified owner) –
Excellent! I’ve been using home-made straight edges and boards that I’d screw down to a table, run my circular saw down it and sort of get me some straight cuts. But, it was practically laughable! Not to mention dangerous! Been wanting one of the saw guides for long time now!I got the Bora, I love it and I also wonder why I waited sooo long to buy me one. Just not tooo smart on my end!This one is an all aluminum straight edge, thick rigid plastic for the rest. Def not JUNK! When I lock it in place it don’t give, or “walk” on you, so to speak. Solid, thick plastic clamps! The aluminum is thick, I just don’t see it warping, bending or nothing like that anytime soon, at all. The saw slides right on down for a perfect straight cut every cut I’ve made so far! I can’t understand what took me sooo long finally get me one of these saw guides! Anyway, it’s simple to use, like they say, you only lock it from one side and no going to the other side of your table or whatever, no wasting time and walking around! Adjusts easy, none of that binding or anything like that while trying to adjust clamp! This is big help if you got a few cuts to make, if you just want a perfect cut each time or if you’re like me and don’t want to break out your table saw for everything a table saw is needed for! This turns my circular saws into table saws, simply and quickly! I love it. Did I mention I just can’t believe it took me sooo long to finally get me one of these??! If you’re on the fence about buying you one, I’d get this Bora, it’s sooo worth it, you’ll be glad you got you one, especially the “Bora” saw guide. They’re def high end!Should anything go bad or anything crazy happen with mine I’ll update my review, but so far, so excellent!
Tony Hintz (verified owner) –
BORA NGX Clamp Edge Saw Guide is a quality guide for circular saws, routers and even jig saws. It is made of heavy duty aluminum with an excellent clamping method that secures the guide rail above on top of the sheet goods with an edge clamp. The handle to tighten the guide is easy to use by one person and doesn’t budge at all when used with the saw. A secure fit is critical in preventing the saw from wandering off the cut. It doesn’t happen often, but it can ruin the cut and I’ve done it. I had a shorter Rockwell guide and it wasn’t nearly as well done as this one. There is an optional second section that can be joined to this 50-inch rail extending it to handle rip cut for sheet length goods, too.An advantage of this system is the excellent options that can be had, sold separately, to make it even better to use. I used my rail with their universal circular saw plate that mounts the circular saw using hold down clamps. The plate can then be slipped into the slots on the top of the aluminum rail securing it. It then works more closer to a track saw. Included with the plate is a length of 3M non-chip strip to attach to the bottom of the plate along the saw blade, reduces any top edge tear-out for a cleaner cut. This is useful for bonded veneers. Bora has similar plates for routers and a jig saws that slip into the slots on the top of the rail. Finally, I was at initially concerned about the plate being plastic. It is thick plastic and feels substantial for DIY work, all well done. I tried the rail and saw plate out with my Milwaukee cordless circular saw and it fit nicely after about five minutes of making set-up adjustments. You have to slide over the hold down rail that has two clamps and make it exactly parallel to the saw blade and lined up on the plate’s blade guide. It is all easily done with allen screws and a flat slotted screwdriver. Really not a big deal, but the saw has to be accurately lined up to get a straight cut. I didn’t use their non-chip tape and didn’t need it for the MDF used. Overall, this is an excellent tool for crosscutting sheet goods. The rail alone is first rate and with the circular saw plate it goes quicker and is more accurate. I also own a small work-site table saw and when working alone prefer this method to cut sheet goods on two saw horses. It just is safer with my experience level and equipment setup. I feel the Bora system however you’ve configured it is a good value for DIY-ers to other methods.
Gunner Hamill (verified owner) –
Cuts straight lines and is a great tool. Guide does stick while cutting and adhesive tape starts to peel off when not in use.
Eduardo Homenick (verified owner) –
It is a nice product but the clamp pressure is not that strong, it can slip and will if there is any pressure from the saw. Also the height or thickness is a little to much who’s had only allows the skill saw to be used in one direction. Slipping while clamp is set is main concern.
Edgardo Homenick (verified owner) –
It took me a little while to understand on how to mount my saw but once the light bulb in my head turned on it was easy. One of the clamps broke and sent Bora a picture of it and they sent me a new one right away. Good Customer Service!!!!!!!!!!
Keenan Schulist (verified owner) –
I like the Bora NGX clamp edge but was disappointed that it did not come with a tape to attach to the edge for the saw guide zero clearance cuts. Was very surprised to find that the plastic tape costs over $20.00. I bought this so that I wouldn’t have to separate my existing 50 inch clamp and extension. I only paid $150 for the 50inch clamp, 50inch extension, saw guide, 2-55″ tapes, and 2 clamps. Since I paid $59.94 for the 50″ clamp and will have to pay $20 for the tape guess I should have just bought 2 $149 packages and had a spare tape and saw guide.
Tania DuBuque (verified owner) –
I had a problem with the non-chip strip; it was pulling away from the metal and adhesive after I installed it. I contacted the manufacturer and they immediately sent a replacement.
Wendell Barrows (verified owner) –
Excellent saw guide, an important tool if you dont own a table saw or cant lug a large sheet of plywood across a table saw. It is very easy to use and the clamp is strong. The clamp has a temporary setting before you lock it into place. It locks very tight and may bow up so you should leave the clamp a little loose before cinching it down. It holds onto the piece nicely. For sawing, all you need to do is know the distance from the edge of you saw plate to the cut (mine is 4″) and set the clamp that distance away. The clamp can fit easily across 4 foot sheet and is durable as well. It can also be used for scoring drywall. This is a great tool to have in the workshop and hangs easily on a nail for storage. In the past I have used my most straight piece of wood and clamps. This saw guide saves me time and hassle.
Joannie Hirthe (verified owner) –
So glad I have one of these. While I admittedly haven’t used it much, it has been great the handful of times I have put it to use. Cuts now come out perfectly straight, which was always a struggle when simply following a line or using a makeshift guide out of a straight edge and clamps. I also own the saw plate for this guide but wasn’t sure that the blade and edge were parallel nor convinced that the saw would stay firmly in place, so I never actually used it to cut anything. One of these days I’ll give it another shot.Back to the guide:. There’s 50″ between the jaws, so cutting a 4×8 piece of plywood across the shorter side isn’t a problem. Once tightened down, they grip the edges really well – no issues with them coming loose. Now, I’m not sure if this is a design issue or a feature, but once you loosen the clamp, you kind of have to fiddle with it in order to move the jaw. Kind of annoying but not a deal breaker. Another thing that bothers me is the fact that the critical parts (jaws, clamp) are made out of plastic. Should be fine for regular homeowner use, but longevity is a concern. One thing to note is that the clamp sticks out close to 3″ when it is tightened – just something to consider as this may be a problem if you have to set this up on the floor.
Merlin Kohler (verified owner) –
This is one of those tools I never knew I needed until I tried it. I’ve always used a couple of clamps and something with a “straight” edge to try to get a straight line. That involved finding something straight and of course running from side to side of the sheet to adjust the clamp. This tool takes all that extra effort away. Set it where you need it and quickly clamp it at one end, then cut. Done. It’s very light, very easy to maneuver, and the adjustable clamp slides easily in the track.Pair the clamp with Bora Saw Plate accessory (https://www.homedepot.com/p/BORA-NGX-55-in-Saw-Plate-with-Non-Chip-Strip-544001/311799074), and move your saw effortlessly along the track. These clamps and accessories basically turn your circular saw into a unisaw!
Durward Fadel (verified owner) –
This is a strong, easy to operate clamp with a versatile saw guide attachment (Model 544050, Made in China). The clamp is 50” in length, long enough to use on a 4′ x 8′ piece of plywood to cross-cut it. The clamp adjusts by sliding the clamp end, but the mechanism must be FULLY disengaged or it will not slide. As with most clamps, the edge will not automatically be square to the clamping surface so use a square to align the clamp. The clamping force is STRONG, and takes a bit of muscle to lock/unlock the clamp. It’s enough to actually bend 1/4” plywood (see photo) so it will hold tightly during use. The clamp has two parallel slots on it that are perfect for holding 1/4” bolts, including toilet bolts, meaning the clamp can be used with homemade jigs. There is a nice hanging hole at the top of the clamp. This clamp is much better than either of the other two 50” clamps I own and will get a lot of use.I normally cut plywood by just sliding my circular saw against the edge of the clamp, and usually don’t drift from the clamp. The Edge Saw Guide virtually eliminates the chance of drift by riding BOTH sides of the clamp. The base adjusts for most saws (right or left-handed) and locks onto the saw with three clamps. Adjustment is a one-time task, requiring a 3mm hex (allen) wrench, which was not supplied. Unfortunately for me, there was no way to adjust the clamping bolts to engage on a flat spot on my saw base, which has a grid pattern, so the grip was tenuous at best. The guide comes with a strip of plastic to be installed as a “non-chip” edge, preventing the wood from splintering along the cut (similar to a zero-clearance throat plate on a table saw). I chose not to install mine, as it limits the clamps use as an edge guide for other saws and/or router. The clamp and guide work perfectly without it, but the cut itself might not be as clean on the upper surface.For my money I would buy the clamp and skip the Edge Saw Guide, especially since it doesn’t fit my particular circular saw as well as it might fit others. It’s a good quality accessory, but doesn’t add enough value for me.
Geoffrey Bins (verified owner) –
This is a very useful tool overall, but the adhesive on the chip strip is weak and didn’t last for two days. Since the strip is not a necessary item, I can’t complain too loudly since I really like the rail and bracket.
Jackeline Erdman (verified owner) –
The Bora NGX Clamp Edge Saw Guide is a good way to get a straight line cut on sheets of plywood or even other sheet products. The basic construction of this tool is of an aluminum extrusion and a plastic clamping system that quickly adjusts to any length of material up to about 50 inches. The actual clamp is easy to use with a large clamping handle. This saw guide is lightweight and once clamped to sheet of material doesn’t stand high enough to interfere with those saws where the motor hangs out beyond the base plate of the saw. This means you can cut with either side of saw. I prefer to hang the motor side of the saw onto the larger (clamped side) of the material but you must decide which way the saw is going to go because the measurement from the edge of the saw’s base plate is different on each side. This brings up another concern in that the line to be cut has to be marked and the saw guide has to be off-set by that amount. My easy fix for that is to cut one or two small blocks of wood, measuring exactly the amount from the edge of the saw’s base plate to the blade, then use them to mark the location where your saw guide will be placed and secured. So that brings us to a point where you want to ask why not just snap a chalk line mark and follow it. I have to say that this clamp edge saw guide will provide a straighter cut than following a chalk line but it will take a lot more time and the results may not be worth it for many users. I want to also mention that Bora NGX has an accessory saw plate (Part #544001) that allows attachment of most circular saws and slides over the top of this saw guide that will give results similar to a track saw. I have included a photo of that product below. Overall I think that this is a good product that will provide excellent results when used properly but it requires much more time than using the good old chalk line.
Lisette Osinski (verified owner) –
So my Dad had a guide for his circular saw which was two pieces. It was a pain to setup & get straight. I ordered this guide because it was one piece & can be setup with one hand as I demonstrate in the video below. When cutting thick plywood, using one of these guides is way easier & more accurate than trying to rip the material on a table saw or using a circular saw freehand. Mine came with a sled, which can be used in conjunction with the guide to make the cutting easier & more accurate.
Ernesto Bogisich (verified owner) –
Exactly what I needed for rip cuts without the need of a track saw
Kellen Hammes (verified owner) –
This Bora clamp deluxe just make my jobs so much easier I do carpentry, cabinets, and other wood work, now I can make my cuts much more straight, or in any angle, the with extension you can cut a plywood 8 feet long or you can take the extension off and do smaller cuts, the saw plate is included and so easy to attach a circular saw, you can move it to different measurements positions to make your cuts, definitely I will recommend this Bora clamp deluxe for smaller or big jobs
Candice Pfannerstill (verified owner) –
I think this is a great tool, especially when you purchase NGX saw plate to go with it. However, see my review of the saw plate. It only comes with one 55 inch Non Chip Strip. YOU NEED A SECOND ONE! This is essential for aligning the Clamp Edge when ripping full sheets of plywood. This is not noted anywhere in the product description and HD doesn’t offer the NCS as a separate purchase option.
Luis Nicolas (verified owner) –
Excellent alternative to buying a track saw system. I already had an old circular saw that was collecting dust, so it was nice to be able to put it to use. It does require some setup, so make the extra effort so your cuts are straight and true.