BORA NGX 55 in. Non-Chip Strip Replacement
$21.38
Open up your favorite wine bottle with utmost style and add life to your party by choosing this fantastic BORA NGX NonChip Strip Replacement.
In stock
Description
The non-chip strip makes it easy to eliminate tear-out. Simply press this self-adhesive strip onto the clamp edge and cut. The excess width of the strip will come off so the edge of the non-chip strip sits flat against your blade parallel to your clamp edge.
- Self-adhesive non-chip strip ensures smooth cut with reduced tear-out
- Adheres to bottom side of BORA clamp edge for a clean cut
- Part of the BORA clamp edge system to cut and rip sheets and boards
- Sits flat against blade after initial cut to provide clear cut line of visibility
Additional information
| Weight | 0.02 lbs |
|---|---|
| Dimensions | 55.00 × 0.87 × 0.06 in |
| Color Family | White |
| Ideally Used With | Circular Saws |
| Material | Plastic |
| Model | 544003 |
| Power Tool Accessory Type | Other Accessory |
| Product Length (in.) | 55 in |
| Tools Product Type | Other |
Reviews (86)
86 reviews for BORA NGX 55 in. Non-Chip Strip Replacement
Only logged in customers who have purchased this product may leave a review.
Related products
Saw Accessories
Olson Saw Contains 3 dry lubricants that will not make your band saw blade oily
Model# CB50000BL
Saw Accessories
Model# 60095
Saw Accessories
Model# BDCMTJS
Saw Accessories
Model# KMS7213
Saw Accessories
Triton 10 in. 15 Amp Contractor Saw Module for Use with WorkCentre
Model# TWX7CS001
Saw Accessories
Model# DW3278
Saw Accessories
Model# 530401
Saw Accessories
Model# KMS7800
Ines Hilpert (verified owner) –
I love the clamp and rails.I was impressed with this edge clamp set. I have wanted one for a while now and was happy to get this one. The 50″ rails (2) have a good weight to them and when connected to make a 100″ single rail is very sturdy.I gave this set 4 stars because I didn’t like the setup of the saw attachment. I watched a couple of You Tube videos about connecting the saw to the plate and then to the rails. The directions included with the set also were a little vague for the first time user. After watching the videos, I decided to just use the rails. I do plan on using the saw plate attachment in the future, but didn’t want to take the time to figure out all the measurements. I will update my rating to 5 if I find the saw plate makes a great improvement. I did like the two extra clamps that are included in this set. I’m planning on building a shed in the near future and already see that some of the cuts will be improved with the versatility of these two clams to secure the rails. I am happy with this set and will be using it many times in my future. It’s a great buy and I want to learn how to use the saw plate. I think it will be a welcome piece once I figure out how to use it.
Rosemary Homenick (verified owner) –
I like that the t-tracks accept 1/4 x 20 bolts. I hope to get lots of use from it. It seems pretty solid.
Rosario Collins (verified owner) –
Worked really well
Mariela Rowe (verified owner) –
Precise quick sheet cutting guide. Light, strong, well made and easy to use. Clamping NGX guide and bonus exact fitting saw plate allow time saving cuts. Especially for equal multiple sheet cutting. Clear consise instructions. Initial saw plate set up took a few minutes but once done allowed quick easy detach and reattaching of saw with quick release clamps. Guide clamps to hold securely for use with saw or saw plate. First task was squaring up plywood work surface, guide performed well, easily met expectations. Easy to set perpindicular using square then clamping in place for an accurate cut. The only issue was with the saw plate cut line indicator detaching after use. Likely knocked out. Inserting opposite way, more to my liking in use, care needs to be given when handling saw plate to prevent loss of cut line indicators. Selected the NGX guide for beadboard sheet cutting. Highly satisfied with guides ability to hold panel securely for precise clean cuts. Backing clamp slightly off panel allowed grip without bending for precise clean cuts. Guide quickly proved valuable for accurate quick sheet cutting but also as a straight edge and extension for level adding more value to the economical saw guide. A great DIY tool that performs very well. Highly recommend.
Lucious Little (verified owner) –
This clamp edge was very easy to use.
Joy Pouros (verified owner) –
Making precise cuts on sheet goods has always been a problem. As a hobbyist who makes a lot of furniture and cabinetry, I usually do precision cuts on the table saw. But making precision cuts on sheet goods has always been a problem. In the past I would calculate the offset and clamp a board to the plywood and hope that the board was straight and square. My norm was to cut oversize and then do the precision on the table saw, but that was not always possible. A track saw would do a much better job, but I could not justify the expense. When I got the BORA 50” NGX Clamp Edge I found I no longer had to rely on the accuracy of whatever board I happened to find. This clamp adjusts quickly and is automatically square with the surface. It holds tightly and cures most of the difficulty I had. By adding the NGX Pro Saw Plate, it allows me to use my circular saw like a track saw. Now I can rip through sheet goods precisely without calculating the offset and with the non-chip strip attached to the clamp, tear out is greatly reduced. The circular saw attaches quickly and securely to the Saw Plate with 3 locking hold downs. Once I found the proper Allen wrench, setup was easy and I was ready to saw. (Hint – it is 3mm.) Very happy with this combination and it will definitely save me a lot of time and material.