BORA NGX 50 in. Clamp Edge Saw Guide
$49.97
Easily achieve straight and precise cuts on any tough surface by using this amazingly powerful BORA NGX Clamp Edge Saw Guide. Ensures lasting durability.
In stock
Description
The BORA NGX Clamp Edge saw guide makes it easy to achieve straight and precise cuts with your circular saw. Cutting large sheets of plywood or MDF materials has never been easier. Just adjust the clamp to the desired cut dimension and lock it in place. During the cut, your circular saw rides along the edge of the BORA NGX saw guide resulting in a professional, accurate cut. And, best of all with the BORA NGX Clamp Edge, you position, adjust and lock the clamp all from the same end. This convenience feature eliminates the need to walk around to the opposite side of the material to adjust or lock the clamping mechanism.
- Constructed with heavy-gauge aluminum for extreme duty
- T shaped locking handle slides up and down the guide to fit material being cut
- Locking handle linear motion rotates and locks in line with the aluminum extrusion for accuracy
- Grabs and locks to the work surface for a secure edge that won’t budge
- Easiest way to make precise, track saw like cuts
- Full 50 in. of clamping capacity
- 3 in. W extrusion is equipped with 2 slots which accept the head of a 1/4 in.-20 bolt, great for attaching shop built jigs or fixtures
- Use with circular saws, jig saws and routers or anytime a straight edge guide is needed
Additional information
| Weight | 2.3 lbs |
|---|---|
| Dimensions | 1.90 × 3.20 × 57.90 in |
| Color Family | Assorted Colors |
| Ideally Used With | Circular Saws |
| Material | Aluminum |
| Model | 544050 |
| Power Tool Accessory Type | Other Accessory |
| Product Length (in.) | 4 in |
| Tools Product Type | Power Tool |
Reviews (86)
86 reviews for BORA NGX 50 in. Clamp Edge Saw Guide
Only logged in customers who have purchased this product may leave a review.
Related products
Saw Tracks
General Tools 20 in. Heavy-Duty T-Track Professional Face Frame System
Model# 856T
Saw Tracks
Model# KMS8000
Saw Tracks
Model# 71128
Saw Tracks
Model# 36050
Saw Tracks
Model# KMA2700
Saw Tracks
Olson Saw 12 mm x 3/4 in. Guide Block for 14 in., 16 in. and 18 in. Imported Band Saws (4-Pack)
Model# CB50055BL
Saw Tracks
Model# TTSTC
Saw Tracks
Model# 196664-7
Donnie Gibson (verified owner) –
Good quality product for the price. Maybe not as nice as a good track saw, but for the few projects I do each year it works fine. Allows straight cutting of 4×8 sheets in both directions. It works best with saws that have a flat metal base on top. My Porter Cable saw has ridges on top of the base which creates some problems. I ended up purchasing a Dewalt saw as the base is flat on top. I’d recommend getting a separate 4′ section for cross cutting sheets of plywood (4′ direction) to avoid having to keep taking the guide apart. Also the saw sits fairly high off of the wood so the cutting depth is reduced quite a bit. A 6 1/2″ blade would be marginal.
Maria Moen (verified owner) –
It makes cutting perfect straight lines with a circular saw easy. This will cut across the 48” side of plywood or any sheet good. You can also add another 50” section and rip the full length of a sheet of plywood. Cheaper than a track saw.
Jaida Pollich (verified owner) –
Cannot overstate the convenience of the locking mechanizm
Bennett Nikolaus (verified owner) –
This is a great tool. I’ve been fiddling for years with just clamping a long piece of straight wood to plywood when I need to make cuts with any precision. So, three clamps and a bulky piece of wood. It works, but it’s a pain. This tool allows you to clamp on sheet goods up to 4 feet wide and get cutting right away. It seems to clamp on consistently at a right angle, but I’m a bit compulsive, so I do check each time. You will have to do some calculation to know how far to set the clamp from where you need to cut–you have to calculate some offset from your saw’s guide. Unless–you can get the Bora Saw Plate that fits with this. If you have the saw plate, you fit your circular saw to the plate, attach an additional guide to the clamp edge, and after setup, you can set the guide to where you want your cuts. This speeds up the process like crazy, and basically gives you the capabilities of a track saw from your circular saw. Great stuff.
Elvis Von (verified owner) –
Excellent alternative to buying a track saw system. I already had an old circular saw that was collecting dust, so it was nice to be able to put it to use. It does require some setup, so make the extra effort so your cuts are straight and true.
Ebony Marvin (verified owner) –
This Bora clamp deluxe just make my jobs so much easier I do carpentry, cabinets, and other wood work, now I can make my cuts much more straight, or in any angle, the with extension you can cut a plywood 8 feet long or you can take the extension off and do smaller cuts, the saw plate is included and so easy to attach a circular saw, you can move it to different measurements positions to make your cuts, definitely I will recommend this Bora clamp deluxe for smaller or big jobs