BORA NGX 50 in. Clamp Edge Saw Guide Extension
$56.59
Easily swing the lathe tailstock down and store it out of the way with the selection of this BORA NGX Clamp Edge Saw Guide Extension.
In stock
Description
The NGX Clamp Edge System makes it faster and simpler to break down sheet material rip and crosscut boards with clean, accurate cuts every time. It’s never been easier to rip, cut, and break down material than with the all-new NGX Clamp Edge System. No more fumbling with adjustable clamp ends on opposite sides of the straight edge the adjustable clamp is connected to the handle. Simply hook the Clamp Edge across your board, line it up with your cut, and clamp it down all without moving your feet.
- Fits into NGX clamp edge saw guide to increase length by 50 in.
- Easily attached with metal connectors
- Made of heavy-gauge, extruded aluminum for extreme durability
- Get track saw-like precision without the hefty price tag
- Use with circular saws, routers, jig saws, and other portable power tools
- Part of the NGX Clamp Edge System to cut and rip sheets and boards
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
Additional information
| Weight | 1.5 lbs |
|---|---|
| Dimensions | 53.00 × 3.00 × 1.50 in |
| Color Family | Silver |
| Ideally Used With | Circular Saws |
| Material | Aluminum |
| Model | 544060 |
| Power Tool Accessory Type | Other Accessory |
| Product Length (in.) | 50 |
| Tools Product Type | Other |
Reviews (86)
86 reviews for BORA NGX 50 in. Clamp Edge Saw Guide Extension
Only logged in customers who have purchased this product may leave a review.
Related products
Saw Tracks
Model# 71173
Saw Tracks
Triton 2 in. x 27.5 in. Track Pack with Connectors for Track Saw
Model# TTSTP
Saw Tracks
Model# TTSAG
Saw Tracks
Model# PM-7000i
Saw Tracks
Model# 1312
Saw Tracks
Model# SM844
Saw Tracks
Genesis 2 in. Plunge Saw Aluminum Rip Cutting Track System for GCS545C and GPCS535CK (3-Piece)
Model# GAPCS203
Saw Tracks
Model# TTSWC
Audreanne McDermott (verified owner) –
I like the Bora NGX clamp edge but was disappointed that it did not come with a tape to attach to the edge for the saw guide zero clearance cuts. Was very surprised to find that the plastic tape costs over $20.00. I bought this so that I wouldn’t have to separate my existing 50 inch clamp and extension. I only paid $150 for the 50inch clamp, 50inch extension, saw guide, 2-55″ tapes, and 2 clamps. Since I paid $59.94 for the 50″ clamp and will have to pay $20 for the tape guess I should have just bought 2 $149 packages and had a spare tape and saw guide.
Angelica Huel (verified owner) –
Precise quick sheet cutting guide. Light, strong, well made and easy to use. Clamping NGX guide and bonus exact fitting saw plate allow time saving cuts. Especially for equal multiple sheet cutting. Clear consise instructions. Initial saw plate set up took a few minutes but once done allowed quick easy detach and reattaching of saw with quick release clamps. Guide clamps to hold securely for use with saw or saw plate. First task was squaring up plywood work surface, guide performed well, easily met expectations. Easy to set perpindicular using square then clamping in place for an accurate cut. The only issue was with the saw plate cut line indicator detaching after use. Likely knocked out. Inserting opposite way, more to my liking in use, care needs to be given when handling saw plate to prevent loss of cut line indicators. Selected the NGX guide for beadboard sheet cutting. Highly satisfied with guides ability to hold panel securely for precise clean cuts. Backing clamp slightly off panel allowed grip without bending for precise clean cuts. Guide quickly proved valuable for accurate quick sheet cutting but also as a straight edge and extension for level adding more value to the economical saw guide. A great DIY tool that performs very well. Highly recommend.
Tressie Jast (verified owner) –
Excellent! I’ve been using home-made straight edges and boards that I’d screw down to a table, run my circular saw down it and sort of get me some straight cuts. But, it was practically laughable! Not to mention dangerous! Been wanting one of the saw guides for long time now!I got the Bora, I love it and I also wonder why I waited sooo long to buy me one. Just not tooo smart on my end!This one is an all aluminum straight edge, thick rigid plastic for the rest. Def not JUNK! When I lock it in place it don’t give, or “walk” on you, so to speak. Solid, thick plastic clamps! The aluminum is thick, I just don’t see it warping, bending or nothing like that anytime soon, at all. The saw slides right on down for a perfect straight cut every cut I’ve made so far! I can’t understand what took me sooo long finally get me one of these saw guides! Anyway, it’s simple to use, like they say, you only lock it from one side and no going to the other side of your table or whatever, no wasting time and walking around! Adjusts easy, none of that binding or anything like that while trying to adjust clamp! This is big help if you got a few cuts to make, if you just want a perfect cut each time or if you’re like me and don’t want to break out your table saw for everything a table saw is needed for! This turns my circular saws into table saws, simply and quickly! I love it. Did I mention I just can’t believe it took me sooo long to finally get me one of these??! If you’re on the fence about buying you one, I’d get this Bora, it’s sooo worth it, you’ll be glad you got you one, especially the “Bora” saw guide. They’re def high end!Should anything go bad or anything crazy happen with mine I’ll update my review, but so far, so excellent!
Anastacio Cruickshank (verified owner) –
The Bora NGX Clamp Edge Saw Guide is a good way to get a straight line cut on sheets of plywood or even other sheet products. The basic construction of this tool is of an aluminum extrusion and a plastic clamping system that quickly adjusts to any length of material up to about 50 inches. The actual clamp is easy to use with a large clamping handle. This saw guide is lightweight and once clamped to sheet of material doesn’t stand high enough to interfere with those saws where the motor hangs out beyond the base plate of the saw. This means you can cut with either side of saw. I prefer to hang the motor side of the saw onto the larger (clamped side) of the material but you must decide which way the saw is going to go because the measurement from the edge of the saw’s base plate is different on each side. This brings up another concern in that the line to be cut has to be marked and the saw guide has to be off-set by that amount. My easy fix for that is to cut one or two small blocks of wood, measuring exactly the amount from the edge of the saw’s base plate to the blade, then use them to mark the location where your saw guide will be placed and secured. So that brings us to a point where you want to ask why not just snap a chalk line mark and follow it. I have to say that this clamp edge saw guide will provide a straighter cut than following a chalk line but it will take a lot more time and the results may not be worth it for many users. I want to also mention that Bora NGX has an accessory saw plate (Part #544001) that allows attachment of most circular saws and slides over the top of this saw guide that will give results similar to a track saw. I have included a photo of that product below. Overall I think that this is a good product that will provide excellent results when used properly but it requires much more time than using the good old chalk line.
Montana Ledner (verified owner) –
This guide makes cutting sheets of plywood, oriented strand board and composite siding much easier. In my opinion, this is a must have for the DIY handyman. Matched with the saw sled, you can cut straight edges up to fifty inches. My biggest concern is that the saw sled is made of plastic and I don’t know how much rough use it can handle. I have always had a problem free cutting sheet material squarely and this set up will help accomplish precise, straight edges.
Arlene Simonis (verified owner) –
Works great especially with worx exactrack circular saw. Cuts through 4 x 8 plywood straight every time!
Gerardo McKenzie (verified owner) –
So glad I have one of these. While I admittedly haven’t used it much, it has been great the handful of times I have put it to use. Cuts now come out perfectly straight, which was always a struggle when simply following a line or using a makeshift guide out of a straight edge and clamps. I also own the saw plate for this guide but wasn’t sure that the blade and edge were parallel nor convinced that the saw would stay firmly in place, so I never actually used it to cut anything. One of these days I’ll give it another shot.Back to the guide:. There’s 50″ between the jaws, so cutting a 4×8 piece of plywood across the shorter side isn’t a problem. Once tightened down, they grip the edges really well – no issues with them coming loose. Now, I’m not sure if this is a design issue or a feature, but once you loosen the clamp, you kind of have to fiddle with it in order to move the jaw. Kind of annoying but not a deal breaker. Another thing that bothers me is the fact that the critical parts (jaws, clamp) are made out of plastic. Should be fine for regular homeowner use, but longevity is a concern. One thing to note is that the clamp sticks out close to 3″ when it is tightened – just something to consider as this may be a problem if you have to set this up on the floor.
Braxton Deckow (verified owner) –
THis is a much better system than my fist clamp on guide. The clamp on to the board section is mostly aluminum. The saw sled is mostly plastic. My only problem was locating the proper tool to get the sled to fit my circular saw. Once that was sorted out it was smooth sailing. This is much more precise than the early model I had. The light weight will also make this tool very portable. That only leaves me looking at the new battery operated saws.
Beryl Fahey (verified owner) –
Cannot overstate the convenience of the locking mechanizm
Germaine Oberbrunner (verified owner) –
This is a great tool. I’ve been fiddling for years with just clamping a long piece of straight wood to plywood when I need to make cuts with any precision. So, three clamps and a bulky piece of wood. It works, but it’s a pain. This tool allows you to clamp on sheet goods up to 4 feet wide and get cutting right away. It seems to clamp on consistently at a right angle, but I’m a bit compulsive, so I do check each time. You will have to do some calculation to know how far to set the clamp from where you need to cut–you have to calculate some offset from your saw’s guide. Unless–you can get the Bora Saw Plate that fits with this. If you have the saw plate, you fit your circular saw to the plate, attach an additional guide to the clamp edge, and after setup, you can set the guide to where you want your cuts. This speeds up the process like crazy, and basically gives you the capabilities of a track saw from your circular saw. Great stuff.
Blanca Muller (verified owner) –
I got this to help me cut large pieces of plywood for some upcoming woodworking projects. I expect this to work perfectly in assisting me in handling full sheets of plywood, OSB, MDF, and anything else that comes in large sheets – can’t wait to get started this weekend. The track and attachments are very well made and the instructions included will help greatly when setting this up and using it.
Madie Kreiger (verified owner) –
Making precise cuts on sheet goods has always been a problem. As a hobbyist who makes a lot of furniture and cabinetry, I usually do precision cuts on the table saw. But making precision cuts on sheet goods has always been a problem. In the past I would calculate the offset and clamp a board to the plywood and hope that the board was straight and square. My norm was to cut oversize and then do the precision on the table saw, but that was not always possible. A track saw would do a much better job, but I could not justify the expense. When I got the BORA 50” NGX Clamp Edge I found I no longer had to rely on the accuracy of whatever board I happened to find. This clamp adjusts quickly and is automatically square with the surface. It holds tightly and cures most of the difficulty I had. By adding the NGX Pro Saw Plate, it allows me to use my circular saw like a track saw. Now I can rip through sheet goods precisely without calculating the offset and with the non-chip strip attached to the clamp, tear out is greatly reduced. The circular saw attaches quickly and securely to the Saw Plate with 3 locking hold downs. Once I found the proper Allen wrench, setup was easy and I was ready to saw. (Hint – it is 3mm.) Very happy with this combination and it will definitely save me a lot of time and material.
Katlynn Daugherty (verified owner) –
Bought this specifically to cut up plywood safely. The Bora NGX clamp definitely does this. For the price, this is a great little unit. It cuts spot on every time. Like any tool, you have to understand how it works and be aware of a few things to ensure it performs properly. On the NGX clamp, here are some things to keep in mind. Note, these are not in any way flaws. 1.) It does take about 15 minutes to connect your circular saw and dial the settings in to ensure adequate space between the cutting blade and the material. I have a DeWalt DWE575 and dialed it so the clamp is exactly 9/16 from my cut line. 15 minutes is not a lot of time, its easy. Do a few practice cuts. I recommend getting it dialed in to an exact measurement and there are markings on the slide piece to help you do this. Also recommend, clamp the top first, then do the 2 side clamps.2.) In the times I tried to use the right angle guide, it has not performed well. I bought the Premier set mainly because it was the only item available as the other parts (bought separately) were out of stock. In other words, I wouldn’t buy the Premier for this one part.3.) When cutting, be sure to put pressure on the right side of the guide. This ensures there is less blade deflection as you cut. 4.) Some folks complain the clamp down slide gets stuck. The trick is this… The gray handle and the orange edge has to come together in order to slide it. Simple. If it’s not sliding… just push them toward each other, you’ll feel a little click and it slides great.5.) Using the extension piece takes practice to ensure it’s spot on straight once the 4 screws are screwed in tightly. I find that screwing them in a little then pushing both slide components together and then screwing in the screws fully works best. Always check to make sure this is straight, common sense.6.) Some folks have mentioned the plastic construction of the base plate and clamp down. I’m not too worried about this. It’s pretty decent grade plastic. You’ll definitely get a few years out of this tool before anything breaks. If it does, just replace the part. Every tool wears.7.) The instructions… ha, this is one area that could use improvement. However, if you know how to use a circular saw and have actually changed out blades, the setup is pretty self-explainatory. Plus there’s plenty of videos out there.To close, even when I do get a table saw, I will still use the Bora NGX to cut full size plywood down to a more managable size. It is the safest way to do this and watching videos of people doing this on a table saw is pretty funny when you look at their eyes cause they know are uncomfortable.
Alexandro Rodriguez (verified owner) –
I have used this quite often. The only problem that I had was with the base when I attached my saw I was trying to cut the edge of my countertop which was 1 1/2″. My 7 1/2″ blade wouldn’t cut deep enough to get the whole edge.
Zack Runolfsdottir (verified owner) –
I have this and the extension for a 104″ reach to rip sheet goods. But buying the two thinking you are going to reconfigure each time you “rip” and “crosscut” a 4×8 sheet is not going to work–too long and too much wear on the parts. It holds well, but takes time to set up straight. A little pricey!
Margarete Dibbert (verified owner) –
This is one of those tools I never knew I needed until I tried it. I’ve always used a couple of clamps and something with a “straight” edge to try to get a straight line. That involved finding something straight and of course running from side to side of the sheet to adjust the clamp. This tool takes all that extra effort away. Set it where you need it and quickly clamp it at one end, then cut. Done. It’s very light, very easy to maneuver, and the adjustable clamp slides easily in the track.Pair the clamp with Bora Saw Plate accessory (https://www.homedepot.com/p/BORA-NGX-55-in-Saw-Plate-with-Non-Chip-Strip-544001/311799074), and move your saw effortlessly along the track. These clamps and accessories basically turn your circular saw into a unisaw!
Elisha McClure (verified owner) –
This clamp edge guide is a fantastic addition to any shop! It is surprisingly light weight, made from extruded aluminum, but very durable. The clamps are a strong plastic material, and the clamp surfaces that touch the material to be cut have a rubber, non-abrasive grip surface.The clamp is ~50″, easily able to be used to rip a full sheet of plywood. One of the clamp ends slides on an internal track making it easily adjustable. That means the clamp can be used to cut any width of wood from ~48″ to 3″ wide. Overall a very useful tool for making long, straight cuts!
Ian Fahey (verified owner) –
BORA NGX Clamp Edge Saw Guide is a quality guide for circular saws, routers and even jig saws. It is made of heavy duty aluminum with an excellent clamping method that secures the guide rail above on top of the sheet goods with an edge clamp. The handle to tighten the guide is easy to use by one person and doesn’t budge at all when used with the saw. A secure fit is critical in preventing the saw from wandering off the cut. It doesn’t happen often, but it can ruin the cut and I’ve done it. I had a shorter Rockwell guide and it wasn’t nearly as well done as this one. There is an optional second section that can be joined to this 50-inch rail extending it to handle rip cut for sheet length goods, too.An advantage of this system is the excellent options that can be had, sold separately, to make it even better to use. I used my rail with their universal circular saw plate that mounts the circular saw using hold down clamps. The plate can then be slipped into the slots on the top of the aluminum rail securing it. It then works more closer to a track saw. Included with the plate is a length of 3M non-chip strip to attach to the bottom of the plate along the saw blade, reduces any top edge tear-out for a cleaner cut. This is useful for bonded veneers. Bora has similar plates for routers and a jig saws that slip into the slots on the top of the rail. Finally, I was at initially concerned about the plate being plastic. It is thick plastic and feels substantial for DIY work, all well done. I tried the rail and saw plate out with my Milwaukee cordless circular saw and it fit nicely after about five minutes of making set-up adjustments. You have to slide over the hold down rail that has two clamps and make it exactly parallel to the saw blade and lined up on the plate’s blade guide. It is all easily done with allen screws and a flat slotted screwdriver. Really not a big deal, but the saw has to be accurately lined up to get a straight cut. I didn’t use their non-chip tape and didn’t need it for the MDF used. Overall, this is an excellent tool for crosscutting sheet goods. The rail alone is first rate and with the circular saw plate it goes quicker and is more accurate. I also own a small work-site table saw and when working alone prefer this method to cut sheet goods on two saw horses. It just is safer with my experience level and equipment setup. I feel the Bora system however you’ve configured it is a good value for DIY-ers to other methods.
Dax Deckow (verified owner) –
The Bora NGX is a great product for ensuring straight cuts! I use it by itself most of the time but it also has accessories that can be used with saws, routers, and jig saws.
Krystina Weber (verified owner) –
This clamp edge was very easy to use.