BORA Steel 100 in. NGX Clamp Edge Deluxe Set (5-Piece)
$169.96
Deliver a remarkable richness to the outer wall space of your home with the selection of this extra ordinary BORA NGX 5-Piece Clamp Edge Deluxe Set.
In stock
Description
The BORA 5-piece NGX Deluxe Set makes it faster and simpler to break down sheet material and rip boards with clean, accurate cuts every time. This set contains all the pieces and accessories you need to successfully complete any project. Rip material of any size using the Clamp Edge by itself, or with the extension attached. Cut any angle using the Track Clamps. Use the Saw Plate to reduce blade offset and get to work faster, and apply the Non-Chip Strip to your Clamp Edgeto eliminate ugly tear-out. Make every cut easier with this versatile kit.
- Includes: 50 in. NGX clamp edge, 50 in. NGX extension with connectors, pro saw plate, 2 rolls of 55 in. non-chip strip, 2 track clamps
- Saw plate features fixed center molded channel helps reduce blade offset and guesswork
- Track clamps easily attach to clamp edge so you can easily cut any angle
- Clamping end on clamp edge moves with handle for easy adjustability from one side
- Locking handle grabs work surfaces for secure grip that won’t budge
- Pro saw plate and non-chip strips increase accuracy and reduce tear out
- For use with circular saws, routers, jig saws, and other portable power tools
Additional information
| Weight | 25 lbs |
|---|---|
| Dimensions | 10.00 × 3.00 × 63.00 in |
| Clamp Type | Edge |
| Color Family | Silver |
| Hand Tool Type | Clamp |
| Individual/Set | Set |
| Model | 544500 |
| Number of Pieces | 5 |
| Tool Set Type | Clamp/ Vise Sets |
| Tools Product Type | Hand Tool |
Reviews (86)
86 reviews for BORA Steel 100 in. NGX Clamp Edge Deluxe Set (5-Piece)
Only logged in customers who have purchased this product may leave a review.
Related products
Hand Tool Sets
Model# 89082
Hand Tool Sets
Model# 60-020
Hand Tool Sets
Model# 89032
Hand Tool Sets
Model# 33
Hand Tool Sets
Model# 63518
Hand Tool Sets
Model# 89062
Hand Tool Sets
Model# G437
Hand Tool Sets
Model# 35102
Jolie Herzog (verified owner) –
Saw plate gets hung up on track guide joint screw heads.
Helen Bergnaum (verified owner) –
I think this is a great tool, especially when you purchase NGX saw plate to go with it. However, see my review of the saw plate. It only comes with one 55 inch Non Chip Strip. YOU NEED A SECOND ONE! This is essential for aligning the Clamp Edge when ripping full sheets of plywood. This is not noted anywhere in the product description and HD doesn’t offer the NCS as a separate purchase option.
Ruthe Hayes (verified owner) –
This guide makes cutting sheets of plywood, oriented strand board and composite siding much easier. In my opinion, this is a must have for the DIY handyman. Matched with the saw sled, you can cut straight edges up to fifty inches. My biggest concern is that the saw sled is made of plastic and I don’t know how much rough use it can handle. I have always had a problem free cutting sheet material squarely and this set up will help accomplish precise, straight edges.
Abraham Kulas (verified owner) –
I love the clamp and rails.I was impressed with this edge clamp set. I have wanted one for a while now and was happy to get this one. The 50″ rails (2) have a good weight to them and when connected to make a 100″ single rail is very sturdy.I gave this set 4 stars because I didn’t like the setup of the saw attachment. I watched a couple of You Tube videos about connecting the saw to the plate and then to the rails. The directions included with the set also were a little vague for the first time user. After watching the videos, I decided to just use the rails. I do plan on using the saw plate attachment in the future, but didn’t want to take the time to figure out all the measurements. I will update my rating to 5 if I find the saw plate makes a great improvement. I did like the two extra clamps that are included in this set. I’m planning on building a shed in the near future and already see that some of the cuts will be improved with the versatility of these two clams to secure the rails. I am happy with this set and will be using it many times in my future. It’s a great buy and I want to learn how to use the saw plate. I think it will be a welcome piece once I figure out how to use it.
Margret Murray (verified owner) –
I like that the t-tracks accept 1/4 x 20 bolts. I hope to get lots of use from it. It seems pretty solid.
Gaston Emard (verified owner) –
It is just what I wanted. It grips firmly and doesn’t shift when cutting my plywood
Wilmer Satterfield (verified owner) –
Easy to use guide clamp that makes accurate cuts quickly. Saw base is easy to mount to your saw and easy to dial in. Great setup for ripping and cutting down plywood.
Cade Schoen (verified owner) –
Exactly what I needed for rip cuts without the need of a track saw
Maida Hickle (verified owner) –
It’s a bit difficult to set up. A lot of folks recommend using it with a dedicated saw and keeping that saw attached to the plate, which I think would help. But it makes excellent straight cuts, and sets up much faster than my old straight edge.
Sheila Stoltenberg (verified owner) –
This appears to be well-made but I never had to use it after I bought it.
Glenda VonRueden (verified owner) –
Works great especially with worx exactrack circular saw. Cuts through 4 x 8 plywood straight every time!
Deshawn Russel (verified owner) –
So my Dad had a guide for his circular saw which was two pieces. It was a pain to setup & get straight. I ordered this guide because it was one piece & can be setup with one hand as I demonstrate in the video below. When cutting thick plywood, using one of these guides is way easier & more accurate than trying to rip the material on a table saw or using a circular saw freehand. Mine came with a sled, which can be used in conjunction with the guide to make the cutting easier & more accurate.
Elena Fay (verified owner) –
This clamp will work well for long cuts as it will reach across a 48 inch width and It comes with an extension for a full 8 foot use. The clamp easily slides in the track and you can adjust pressure by careful placement. The clamps are only 3/4 inch thick so it works well with most stock.It also comes with a sled to mount your circular saw on. It is designed to hold most by simple adjustments. All of this can be a challenge to figure as the instructions are broken to simple drawings and no written text. There are also some clamps included which are designed for making long angle cuts.
Retta Smitham (verified owner) –
This is a strong, easy to operate clamp with a versatile saw guide attachment (Model 544050, Made in China). The clamp is 50” in length, long enough to use on a 4′ x 8′ piece of plywood to cross-cut it. The clamp adjusts by sliding the clamp end, but the mechanism must be FULLY disengaged or it will not slide. As with most clamps, the edge will not automatically be square to the clamping surface so use a square to align the clamp. The clamping force is STRONG, and takes a bit of muscle to lock/unlock the clamp. It’s enough to actually bend 1/4” plywood (see photo) so it will hold tightly during use. The clamp has two parallel slots on it that are perfect for holding 1/4” bolts, including toilet bolts, meaning the clamp can be used with homemade jigs. There is a nice hanging hole at the top of the clamp. This clamp is much better than either of the other two 50” clamps I own and will get a lot of use.I normally cut plywood by just sliding my circular saw against the edge of the clamp, and usually don’t drift from the clamp. The Edge Saw Guide virtually eliminates the chance of drift by riding BOTH sides of the clamp. The base adjusts for most saws (right or left-handed) and locks onto the saw with three clamps. Adjustment is a one-time task, requiring a 3mm hex (allen) wrench, which was not supplied. Unfortunately for me, there was no way to adjust the clamping bolts to engage on a flat spot on my saw base, which has a grid pattern, so the grip was tenuous at best. The guide comes with a strip of plastic to be installed as a “non-chip” edge, preventing the wood from splintering along the cut (similar to a zero-clearance throat plate on a table saw). I chose not to install mine, as it limits the clamps use as an edge guide for other saws and/or router. The clamp and guide work perfectly without it, but the cut itself might not be as clean on the upper surface.For my money I would buy the clamp and skip the Edge Saw Guide, especially since it doesn’t fit my particular circular saw as well as it might fit others. It’s a good quality accessory, but doesn’t add enough value for me.
Anais Kub (verified owner) –
This Bora clamp deluxe just make my jobs so much easier I do carpentry, cabinets, and other wood work, now I can make my cuts much more straight, or in any angle, the with extension you can cut a plywood 8 feet long or you can take the extension off and do smaller cuts, the saw plate is included and so easy to attach a circular saw, you can move it to different measurements positions to make your cuts, definitely I will recommend this Bora clamp deluxe for smaller or big jobs
Brain Grant (verified owner) –
Super handy for trimming doors to fit after a whole home flooring project.
Hermina Pfannerstill (verified owner) –
I set this up today to test it out, First I removed my Craftsman circular saw from another brand track saw base. Then I installed it on the Bora base using the instructions that came with the set. First problem was the instructions are not the best but still able to figure things out. I set the tack across my table saw and placed the base on the track then the saw on the base. This let me adjust it to the track so the saw is not skewed on the base. After installing the saw on the base I installed the tear out strips. They were very easy to install and fit perfect to the track. Then I placed the base with saw on the track again and checked that the blade would ride along the edge of the tear out strip all the way down both pieces of track.. Its now ready to use. I took a piece of 3/4″ red oak plywood that was 76″ long and 24 1/2″ wide and cut 1/2″ off the whole langht so I had 76″ X 24″. I don’t have alot of room to work so I would rip my sheets of ply out side using my truck and a saw horse. but this time I just layed it across my table saw and clamped it down and cut it. The two piece of track connected together and the bora track layed down and clamped with the slide clamp only it was solid as a rock it was not moving. I placed the base and saw on the track and made a perfect cut and my work piece was nice and clean no tear out at all. Now with it 24″ wide I needed 2 pieces 28″ long so I took off the extension track and just use the 1 piece to cut across the width to cut off 28″. Now the left over piece I took and cut off another 28″ langth with my table saw then I compared the 2 pieces and they both were perfect and match up they both were square to each other. I find the base rides on the track very smooth and it does not skew any when you stop and start again. There is no slop in the base when riding along the track. I did not use the 2 track clamps at this time but thay are great I checked them out and thay adjust great they fit the track with no problems and I know I will use them alot in the future. Now with all that said the only thing I can see a problem with is the nuts on the bottom of the base. when I went to adjust the lock down track on the base the nuts turned in the grove. This should be a long nut made with flat stock so it can’t turn in the grove not a hex nut that will ware the plastic if its tighten and loosen to maney times. For me its ok I am leaving the saw set up. Even with the one flaw above this is easer and better than the other brand I have been using that I had to go buy clamps to hold it down to keep it from walking on cuts. Its also harder to set up for long cuts so The Bora clamp edge deluxe set is a Plus plus for me. Now all I need is a Bora Centipede so I dont have to use my truck as a table.
Melissa Mante (verified owner) –
Good quality product for the price. Maybe not as nice as a good track saw, but for the few projects I do each year it works fine. Allows straight cutting of 4×8 sheets in both directions. It works best with saws that have a flat metal base on top. My Porter Cable saw has ridges on top of the base which creates some problems. I ended up purchasing a Dewalt saw as the base is flat on top. I’d recommend getting a separate 4′ section for cross cutting sheets of plywood (4′ direction) to avoid having to keep taking the guide apart. Also the saw sits fairly high off of the wood so the cutting depth is reduced quite a bit. A 6 1/2″ blade would be marginal.
Royal Williamson (verified owner) –
Perfect for cutting ACM panel on my drafting table
Eulah Kautzer (verified owner) –
This clamp edge was very easy to use.