BORA Steel 100 in. NGX Clamp Edge Deluxe Set (5-Piece)
$169.96
Deliver a remarkable richness to the outer wall space of your home with the selection of this extra ordinary BORA NGX 5-Piece Clamp Edge Deluxe Set.
In stock
Description
The BORA 5-piece NGX Deluxe Set makes it faster and simpler to break down sheet material and rip boards with clean, accurate cuts every time. This set contains all the pieces and accessories you need to successfully complete any project. Rip material of any size using the Clamp Edge by itself, or with the extension attached. Cut any angle using the Track Clamps. Use the Saw Plate to reduce blade offset and get to work faster, and apply the Non-Chip Strip to your Clamp Edgeto eliminate ugly tear-out. Make every cut easier with this versatile kit.
- Includes: 50 in. NGX clamp edge, 50 in. NGX extension with connectors, pro saw plate, 2 rolls of 55 in. non-chip strip, 2 track clamps
- Saw plate features fixed center molded channel helps reduce blade offset and guesswork
- Track clamps easily attach to clamp edge so you can easily cut any angle
- Clamping end on clamp edge moves with handle for easy adjustability from one side
- Locking handle grabs work surfaces for secure grip that won’t budge
- Pro saw plate and non-chip strips increase accuracy and reduce tear out
- For use with circular saws, routers, jig saws, and other portable power tools
Additional information
| Weight | 25 lbs |
|---|---|
| Dimensions | 10.00 × 3.00 × 63.00 in |
| Clamp Type | Edge |
| Color Family | Silver |
| Hand Tool Type | Clamp |
| Individual/Set | Set |
| Model | 544500 |
| Number of Pieces | 5 |
| Tool Set Type | Clamp/ Vise Sets |
| Tools Product Type | Hand Tool |
Reviews (86)
86 reviews for BORA Steel 100 in. NGX Clamp Edge Deluxe Set (5-Piece)
Only logged in customers who have purchased this product may leave a review.
Related products
Hand Tool Sets
Model# 60-020
Hand Tool Sets
Model# 70575
Hand Tool Sets
Model# 89052
Hand Tool Sets
Klein Tools Assorted Screwdriver Set with Cushion Grip Handles (8-Piece)
Model# 85078
Hand Tool Sets
Model# 88
Hand Tool Sets
Model# 33
Hand Tool Sets
Model# G437
Hand Tool Sets
Model# 70570
Alejandra Lindgren (verified owner) –
I really could have used this when I was building 4 barn doors for my basement. But I have two more to go and this will make the job much easier. It’s a pretty simple setup – the bars clamp easily to the work piece. And if it’s just straight cuts you can get away without the sled, just keep your saw pressed up against the track. The sled is a little tricky to attach straight but that’s more due to me being new to using a track saw. Couple of YouTube videos later and it was easy to figure out. And using the sled will ensure the saw doesn’t stray. All parts are very sturdy, very little flex in the bars. And the additional track clamps are a great addition – you can use bar clamps or C clamps, but to have clamps purpose built for this is much better. All in all, this is hands down better than screwing in scrap pieces of wood to serve as my guide and then having to fill holes. My only complaint, like others, is the instructions. Definitely not the easiest to follow.
Felipa Grady (verified owner) –
This is a must have for small shops. It’s a great straight edge. Now, I have had it slip on me a couple of times. I now clamp both ends as an added safety measure.
Toni Brown (verified owner) –
I have a few different clamps like this. This one is by far the best.
Else Shanahan (verified owner) –
This product was not what I expected. I thought I could use it with the WTX system that I have, but it would mean I would have to doube up on to straight edges. I think they need to make T square accessary for WTX straight edge system,
Alia Metz (verified owner) –
I found this guide to be very solid as I did not see any measurable deflection when using it and it worked great as a guide. However, not a great track saw substitute. Using either the Saw Plate or just the guide, I found the cuts to be true. I also found that it helped when using the Saw Plate to use a dry lubricant (I used PTFE) on the guide as this allows the saw move much easier on the guide. The guide itself is easy to set up and when locked down it doesn’t move. Using the Saw Plate ensures that your cuts will be true. (I have been known to drift away from a guide.) I think the clamps that allow the guide to be used at an angle across a piece of plywood were very clever and worked great.However, I found the lack of instructions for setting it us to use like a track saw to be lacking to say the least. The instructions were just pictures without any written explanations of any of the steps. Consequently, it took me quite a while to get the saw(s) set up to see how they worked. In addition, it requires a metric allen wrench to set up a saw on the Saw Plate and this wasn’t included so I had to file down another allen wrench to fit. I set put the ‘non chip strip’ on the guide and tried the saw with 24-tooth blade and had minimal tear-out. However, when I switch to the saw with the 60-tooth blade I did have tear-out. Not sure why. I joined the two sections of the guide together to see how that worked and found the joint was not exact, and I had to file the bottom of the lead edge of the Saw Plate so it would not hang up on the joint.I recommend this product an the basis that you will get straight true cuts using the guide particularly when using the Saw Plate. I would have rated it higher if it in fact eliminated tear-out and the instructions were easier to follow. I also found that the nuts that are held in position when tightening the guides on the Saw Plate can rotate as they are not a snug fit in the slots they sit in.
Ernestine Fadel (verified owner) –
The Bora NGX Clamp Edge Saw Guide is a good way to get a straight line cut on sheets of plywood or even other sheet products. The basic construction of this tool is of an aluminum extrusion and a plastic clamping system that quickly adjusts to any length of material up to about 50 inches. The actual clamp is easy to use with a large clamping handle. This saw guide is lightweight and once clamped to sheet of material doesn’t stand high enough to interfere with those saws where the motor hangs out beyond the base plate of the saw. This means you can cut with either side of saw. I prefer to hang the motor side of the saw onto the larger (clamped side) of the material but you must decide which way the saw is going to go because the measurement from the edge of the saw’s base plate is different on each side. This brings up another concern in that the line to be cut has to be marked and the saw guide has to be off-set by that amount. My easy fix for that is to cut one or two small blocks of wood, measuring exactly the amount from the edge of the saw’s base plate to the blade, then use them to mark the location where your saw guide will be placed and secured. So that brings us to a point where you want to ask why not just snap a chalk line mark and follow it. I have to say that this clamp edge saw guide will provide a straighter cut than following a chalk line but it will take a lot more time and the results may not be worth it for many users. I want to also mention that Bora NGX has an accessory saw plate (Part #544001) that allows attachment of most circular saws and slides over the top of this saw guide that will give results similar to a track saw. I have included a photo of that product below. Overall I think that this is a good product that will provide excellent results when used properly but it requires much more time than using the good old chalk line.