BORA NGX 50 in. Clamp Edge Premier Set (6-Piece)
$219.00
Grab an extraordinary addition to modernize your workshop without any hesitation with the assistance of this BORA NGX Clamp Edge Premier Set.
In stock
Description
It’s never been easier to rip, cut, and break down material than with the 6-pc NGX Deluxe Set. This set contains all the pieces and accessories you need to successfully complete any project. Rip material of any size using the Clamp Edge by itself, or with the extension attached. Cut any angle you like using the Track Clamps, and make sure your 90° cuts are square using the exclusive T-square attachment. Use the Saw Plate to reduce blade offset and get to work faster, and apply the Non-Chip Strip to your Clamp Edge to eliminate ugly tear-out. Make every cut easier with this versatile kit.
- Includes: 50-inch clamp edge, 50-inch extension with connectors, saw plate, (2) 55-inch rolls of non-chip strip, pair of track clamps, T-square accessory
- Saw plate features fixed center molded channel helps reduce blade offset and guesswork
- 2 rolls of 55 in. self-adhesive non-chip strip reduces top edge tear-out for a smooth finish
- Locking handle on clamp edge grabs work surfaces for secure grip that won’t budge
Additional information
| Weight | 7.5 lbs |
|---|---|
| Dimensions | 10.00 × 3.00 × 63.00 in |
| Color Family | Silver |
| Ideally Used With | Circular Saws |
| Material | Steel |
| Model | 544600K |
| Power Tool Accessory Type | Other Accessory |
| Product Length (in.) | 10 in |
| Tools Product Type | Power Tool |
Reviews (86)
86 reviews for BORA NGX 50 in. Clamp Edge Premier Set (6-Piece)
Only logged in customers who have purchased this product may leave a review.
Related products
Saw Accessories
Model# 36-260
Saw Accessories
Model# A114UWP
Saw Accessories
Model# BDCMTTS
Saw Accessories
Model# DW3278
Saw Accessories
Model# KMS7800
Saw Accessories
Olson Saw Contains 3 dry lubricants that will not make your band saw blade oily
Model# CB50000BL
Saw Accessories
Model# KMS7214
Saw Accessories
Triton 10 in. 15 Amp Contractor Saw Module for Use with WorkCentre
Model# TWX7CS001
Pinkie Quitzon (verified owner) –
Super handy for trimming doors to fit after a whole home flooring project.
Ahmad Marquardt (verified owner) –
Worked really well
Melissa Roberts (verified owner) –
This guide makes cutting sheets of plywood, oriented strand board and composite siding much easier. In my opinion, this is a must have for the DIY handyman. Matched with the saw sled, you can cut straight edges up to fifty inches. My biggest concern is that the saw sled is made of plastic and I don’t know how much rough use it can handle. I have always had a problem free cutting sheet material squarely and this set up will help accomplish precise, straight edges.
Myra Daugherty (verified owner) –
Perfect for cutting ACM panel on my drafting table
Lester Kunze (verified owner) –
This clamp edge was very easy to use.
Maymie O’Reilly (verified owner) –
Easy to use guide clamp that makes accurate cuts quickly. Saw base is easy to mount to your saw and easy to dial in. Great setup for ripping and cutting down plywood.
Shemar Russel (verified owner) –
It’s a bit difficult to set up. A lot of folks recommend using it with a dedicated saw and keeping that saw attached to the plate, which I think would help. But it makes excellent straight cuts, and sets up much faster than my old straight edge.
Tianna Baumbach (verified owner) –
It took me a little while to understand on how to mount my saw but once the light bulb in my head turned on it was easy. One of the clamps broke and sent Bora a picture of it and they sent me a new one right away. Good Customer Service!!!!!!!!!!
Aiden Parisian (verified owner) –
Outstanding way to make smooth straight cuts across sheeting, like plywood, particle board and paneling. The saw plate is well designed to accommodate many different manufacturers circular saws. I was easily able to attach the 2 saws that I have. The saw plate slides along the saw tracks to provide for easily sawing sheeting. The first section of track is long enough to fit across up to 50″. The second section of track fits on the end of the first to extend the length of cut to 100″. 4 screws are used to attach the 2 sections together. The tracks are made from rigid aluminum and the saw plate is made of plastic. even though it was made of plastic it was durable, rigid and held my 2 saws tightly in place. The only negative I found was somewhat vague installation instructions. Their website didn’t provide a lot more detail. Their customer service did provide a link to video and I ran across a really good one on the internet. Try searching Bora NGX.
Emily Medhurst (verified owner) –
The Bora NGX Clamp Edge Saw Guide is a good way to get a straight line cut on sheets of plywood or even other sheet products. The basic construction of this tool is of an aluminum extrusion and a plastic clamping system that quickly adjusts to any length of material up to about 50 inches. The actual clamp is easy to use with a large clamping handle. This saw guide is lightweight and once clamped to sheet of material doesn’t stand high enough to interfere with those saws where the motor hangs out beyond the base plate of the saw. This means you can cut with either side of saw. I prefer to hang the motor side of the saw onto the larger (clamped side) of the material but you must decide which way the saw is going to go because the measurement from the edge of the saw’s base plate is different on each side. This brings up another concern in that the line to be cut has to be marked and the saw guide has to be off-set by that amount. My easy fix for that is to cut one or two small blocks of wood, measuring exactly the amount from the edge of the saw’s base plate to the blade, then use them to mark the location where your saw guide will be placed and secured. So that brings us to a point where you want to ask why not just snap a chalk line mark and follow it. I have to say that this clamp edge saw guide will provide a straighter cut than following a chalk line but it will take a lot more time and the results may not be worth it for many users. I want to also mention that Bora NGX has an accessory saw plate (Part #544001) that allows attachment of most circular saws and slides over the top of this saw guide that will give results similar to a track saw. I have included a photo of that product below. Overall I think that this is a good product that will provide excellent results when used properly but it requires much more time than using the good old chalk line.
Henri Spencer (verified owner) –
This appears to be well-made but I never had to use it after I bought it.
Albin Hansen (verified owner) –
This is a very convenient tool for cutting across large sheets, like plywood. Being 50″ wide means being able to handle 4′ sheets of plywood. Having a self locking feature is another nice feature. Simply line up on your marks, lock it into place and cut.
Christ Doyle (verified owner) –
I have a few different clamps like this. This one is by far the best.
Cortney Casper (verified owner) –
I like that the t-tracks accept 1/4 x 20 bolts. I hope to get lots of use from it. It seems pretty solid.
Emelie Adams (verified owner) –
Tried to use it over the weekend on a few sheets of plywood. It seems as if not completly square. There does not seem to be any adjustments to square it off perfectly.
Clarabelle Harber (verified owner) –
I love the clamp and rails.I was impressed with this edge clamp set. I have wanted one for a while now and was happy to get this one. The 50″ rails (2) have a good weight to them and when connected to make a 100″ single rail is very sturdy.I gave this set 4 stars because I didn’t like the setup of the saw attachment. I watched a couple of You Tube videos about connecting the saw to the plate and then to the rails. The directions included with the set also were a little vague for the first time user. After watching the videos, I decided to just use the rails. I do plan on using the saw plate attachment in the future, but didn’t want to take the time to figure out all the measurements. I will update my rating to 5 if I find the saw plate makes a great improvement. I did like the two extra clamps that are included in this set. I’m planning on building a shed in the near future and already see that some of the cuts will be improved with the versatility of these two clams to secure the rails. I am happy with this set and will be using it many times in my future. It’s a great buy and I want to learn how to use the saw plate. I think it will be a welcome piece once I figure out how to use it.
Marietta Goodwin (verified owner) –
This clamp/guide is invaluable for table saw free environments. I couldn’t recommend it enough!
Ettie Considine (verified owner) –
I have used this quite often. The only problem that I had was with the base when I attached my saw I was trying to cut the edge of my countertop which was 1 1/2″. My 7 1/2″ blade wouldn’t cut deep enough to get the whole edge.
Lora Schiller (verified owner) –
Boro NGX 5-Piece Clamp Edge Deluxe Set is an excellent way to cut sheet-goods and other tasks. The set consists of two guide rail pieces to handle 4 x 8 panels. One aluminum guide is used to cross-cut the four foot side with a 50-inches long track. For the rip cut, add the second 50-inch guide extension to the first guide for a 100-inch length, a little over 8-feet long. The two set of tracks are held together securely with metal bars and four screws. The track is then laid on top of the supported panel and two edge clamps on each side, under the guide, are easily tightened to give a rock solid grip onto the panel edges. Two included track clamps are also included if you want an angle cut, any angle can be cut up to 90-degrees is possible. You can cut full 4 x 8 panels or smaller sizes easily with this setup. The circular saw making the cut can run along the edge of the aluminum track guide or attached with the provided saw sled that slips into the aluminum guide securely in a groove. Once the saw is mounted to it runs along a groove in the guide preventing the saw from wandering, assuring a straight cut.. It works similar to a track saw. Included in the set used with the sled plate are two lengths of 3M non-chip strips that attach to the bottom for riding on the panel. It minimizes any top edge tear-out for a cleaner cut. This is useful for bonded veneers; although not needed for other panels like MDF or construction grade plywood. The sled is made of sturdy plastic with honeycomb reinforcement that is rigid, doesn’t flex. The saw is held-down with hold-down screws and clips, can be positioned and removed easily. Bora also offers, optionally, other tool sled plates to hold routers and a jig saws that work with the track guide, too.I own a portable table-saw and continue to prefer Bora’s system for breaking down sheet-goods resting on two saw horses. It is safer than handling large sheets alone on the table saw. It gives me more control making the cut safe and clean.
Marisol Lehner (verified owner) –
This guide is easy to use for making long crosscuts of plywood. Very light, but held up well as I cut up seven sheets of plywood to build four cabinets