Bosch 15 Amp 10 in. Corded Portable Jobsite Table Saw with Gravity Rise Wheeled Stand
$518.00
Bring a magnificent tool to fulfill your cutting needs in the home or jobsite by selecting this Bosch Corded Portable Jobsite Table Saw with Gravity Rise Wheeled Stand
In stock
Description
The Bosch 4100-10 10 In. Worksite Table Saw with Gravity-Rise Wheeled Stand is a portable table saw with outstanding capacity and capability. The powerful 15-Amp saw delivers 4.0 max HP, with a large machined aluminum tabletop and a wide 25 In. ripping capacity. The Gravity-Rise Stand provides easy setup and take down. The SquareLock rip fence is engineered for trueness. The 4100 table saw also comes equipped with advanced electronics, such as soft start, constant response circuitry and overload protection.
- Includes (1) GTA47W Gravity-Rise Wheeled Table Saw Stand, (1) Smart Guard System – Barrier-Guard Device and Anti-Kickback Pawls, (1) 10 In. Carbide-Tipped Blade, (1) SquareLock Rip Fence, (1) Miter Gauge, (1) Push Stick, (1) Throat Plate Insert, (1) Multi-Function Blade Wrench, (1) Adjustment Wrench
- Powerful 10 In. Worksite table saw – features 15-Amp saw delivers 4.0 max HP and 3,650 rpm, for the power required for ripping rip-cutting and cross-cutting in of fine- and rough-carpentry materials
- Large cast aluminum top – provides increased work space and material support with a 25 In. ripping capacity to cover all typical jobsite rip-cutting widths
- Soft-start circuitry – manages the intensity of motor start-up and minimizes the possibility of tripping a circuit breaker
- Constant Response circuitry – helps maintain speed under load
- Portability – works seamlessly with the included lighter GTA47W
- Gravity-Rise Wheeled Stand for easy jobsite mobility, with single-action setup and take down
- SquareLock rip fence – engineered for enhanced clamping and trueness
- Smart Guard System – riving knife and anti-kickback pawls provide protection, while the guard assembly provides a barrier to help prevent blade contact while allowing an unobstructed view of the cut
- Onboard storage – allows for access to all included components
- Arbor lock – permits easy blade changes, with arbor lock and blade wrench located onboard
Additional information
| Weight | 110.00 lbs |
|---|---|
| Dimensions | 37.70 × 29.40 × 19.40 in |
| Amperage (amps) | 15 A |
| Included Accessories | Stand |
| Tools Product Type | Power Tool |
| Table Tilt Right Max (degrees) | 0 |
| Table Tilt Left Max (degrees) | 0 |
| Rip Capacity - Right | 25 cm |
| Rip Capacity - Left | 8.5 in |
| Power Tool Features | Blade Guard System, Stand Included |
| PT Horsepower (Hp) | 4 |
| Model | 4100-10 |
| Maximum Cut Depth @ 90 Deg. | 3.125 in |
| Maximum Cut Depth @ 45 Deg. | 2.5 in |
| Horsepower (hp) | 4 |
| Bench & Stationary Tool Type | Table Saw |
| Depth Control | Adjustable |
| Cuts Through | Wood |
| Cordless/ Corded | Corded |
| Corded Tool Type | Table Saw |
| Cord Length (ft.) | 6 |
| Construction Material | Aluminum |
| Condition | New |
| Color Family | Blue |
| Blade Speed | 3650 RPM |
| Blade Location | Centered |
| Blade Diameter (in.) | 10 |
| Work Table Surface | in. x in. |
Reviews (92)
92 reviews for Bosch 15 Amp 10 in. Corded Portable Jobsite Table Saw with Gravity Rise Wheeled Stand
Only logged in customers who have purchased this product may leave a review.
Related products
Saws
Model# 1590EVSK
Saws
Model# 6955-20
Margret Mills (verified owner) –
I own two table saws, one 10″ Craftsman and the Bosch. It takes multiple attempts to accurately set the width of a rip on the Craftsman, so I always keep scraps around. The Bosch is so accurate when set, that I never need to check it (but I still do and the cut is perfect). Getting rid of the Craftsman and buying another Bosch.
Norval Harvey (verified owner) –
I have this saw for a while and it is one of my daily use tools. It is a good design of the tools for a person working on the site.
Delores Little (verified owner) –
Very pleased with the saw. Makes every job a snap. Moving the saw is a breeze. Fast and smooth.
Presley Emard (verified owner) –
There is a little play to the miter slots, but otherwise a great saw. Smooth operation, and a nice, square rip fence. Overall, I’m very happy with it.
Dejah D’Amore (verified owner) –
I bought this due to downsizing to replace my 20 year old Delta Unisaw. So far I’ve only used it on sheet material but for that it was good. No where near the cutting power of the old unisaw but I think it will be just what I need for 90% of my needs. Probably not the best for long 2x rips but it should get the job done. I really like the stand and portability.
Kamren Collier (verified owner) –
I purchased this saw a little over a month ago and must say I absolutely love it. The ease of setup, takedown, and transport is an excellent feature. The accuracy of this saw is without a doubt “spot on”! I can rip a full sheet of 3/4″ oak finished plywood without hesitation and know the saw will not collapse.
Rhiannon Leannon (verified owner) –
Good saw , but wish it had a way to lock the blade height even though it mast not need it
Augusta Considine (verified owner) –
Bought this last year. Everything was perfectly aligned right out of the box. Once I assembled the stand (a bit tricky, keep the box nearby and use the pictures on it for reference) and mounted the saw I was good to go. Cuts like a dream, plenty of power and the stand is nicely engineered. I’d recommend this saw to anyone in the market for a high quality portable table saw.
Katheryn Frami (verified owner) –
I bought this with the promise I would build my own built in book shelves. Love the accuracy of my rips. I came from the clamp and skillsaw club, and boy do I enjoy how much faster this table saw makes me. Crosscut sled makes this all the more useful. The fence can be tricky at times, so I always measure the blade distances to fence in the front and back just to be sure. Eyeballing the fence true-ness is good 90% of the time.
Fermin Macejkovic (verified owner) –
The saw blade was square to the table out of the box. The measurement markings were accurate to the blade out of the box. The fence has a very positive lock and is easy to adjust. Attaching dust control to the saw had better than expected results. The saw works for my needs and will probably be the last table saw I purchase. The folding stand is easy to operate. If there was one small complaint it would be that the stand’s instructions are lacking and somewhat confusing.
Margarete Stamm (verified owner) –
This table saw is exactly what I was hoping it would be
Saul Feeney (verified owner) –
Saw moves easily and sets up quickly. Love the soft start motor.