Bosch 62 in. High Carbon Steel Band Saw Blade for Wood, Plastics, and Non-Ferrous Metals (3-Pack)

73 reviews for Bosch 62 in. High Carbon Steel Band Saw Blade for Wood, Plastics, and Non-Ferrous Metals (3-Pack)

1. Rated 4 out of 5

   Tiana Franecki (verified owner) – June 3, 2022

   I purchase the blade for a Ryobi 9” band saw. It fit. I haven’t used it yet and can not rate performance.

2. Rated 5 out of 5

   Clay Sipes (verified owner) – June 3, 2022

   Works perfectly on my Ryobi!

3. Rated 5 out of 5

   Kaci Goodwin (verified owner) – May 21, 2022

   Yoy really don’t pay me enough to spend my time writting reviews. Actually I don’t get paid at all. I gave you my rating. That should be enough

4. Rated 4 out of 5

   Everardo Spencer (verified owner) – May 17, 2022

   Timely arrival, have not installed the blades yet.

5. Rated 5 out of 5

   Hazel Volkman (verified owner) – May 16, 2022

   Blades last.

6. Rated 5 out of 5

   Caitlyn Hyatt (verified owner) – May 10, 2022

   The bands work good.

7. Rated 5 out of 5

   Cristopher Nikolaus (verified owner) – April 6, 2022

   There are 3 different sizes of saw teeth for various results…they work well for different types of wood!

8. Rated 3 out of 5

   Bulah Ruecker (verified owner) – April 5, 2022

   3 widths of handsaw blades in one package . just used 1 so far. It cuts.

9. Rated 5 out of 5

   Makayla Mraz (verified owner) – March 21, 2022

   I am making my Grand Niece a large hand made Lincoln Log Doll House and these blades on my new Ryobi band saw have made it so much more easier and accurate.

10. Rated 3 out of 5

    Ferne Dicki (verified owner) – February 24, 2022

    Replaced the original blade, which was over 5 years old, with this blade and it doesn’t cut through the material as easily as the old blade. Don’t get me wrong here, it cuts the material and leaves a fairly smooth edge, it’s almost like running a piece of pine through it and then a piece oak — only I changed the blade instead of material. As far as durability, we’ll have to wait and see on that one. Both (old and new) blades seems to be made of same material… Size, thickness, etc.

11. Rated 4 out of 5

    Tiara Hauck (verified owner) – February 23, 2022

    I also bought the Bosch 3/8 x 16 tpi for cutting brass as I thought the 1/8 blade in the 3 pack would “drift” too much on long straight cuts. I was wrong it worked as good as the 3/8 blade. My band saw a 9″ Ryobi specifically says it takes a 62″ blade. Some 9″ saws take a 59 1/2″ blade, read the specs for your machine. If you have a 9″ Ryobi then it should take a 62″ blade. If they are loose on your saw did you tighten them up with the tensioner knob on top or do you have a 59 1/2 saw and did you read the instructions? I find it amazing that somebody would buy a saw and not know the size blades it takes before buying. These blades work reasonably well with my saw which I tuned up following the instructions and knowing what I do about band saws. My saw has drift that is different with each size blade. Go search Bandsaw drift on how to deal with it. Also I have found that when a blade breaks it is one or more of three things. One. there is a bad weld on the blade. Two. Pushing too hard or twisting and Three. Tensioning the blade too tight. It should only be tightened enough to sound like a low strum, not a high strum when you strum it. It only needs to be tight enough so it doesn’t slide and no more. Takes a little practices, but too high tension is what breaks a lot of blades. I cut exotic hardwoods some which are much harder than oak or pine. Like Ironwood and African Blackwoods. These blades hold up reasonably well, but those woods have a lot of silicate in them and no blade holds up long against them.

12. Rated 5 out of 5

    Shakira Kuhlman (verified owner) – February 11, 2022

    I bought a three pack of band saw blades from Home Depot. I’ve only used the 1/8 blade so far. I’ve used it cutting 2″ oak and 1/4″ aluminium, cutting intricate shapes for my 1/8th scale train cars. They cut like a hot knife in butter. I’ve got over 2 hrs of cutting time on the 1/8 blade about equal time on Oak and aluminum. For some having trouble with these blades a possible cause could be machine set up. I think I’m going to get many hours cutting time on these blades. Thank you Home Depot.

13. Rated 5 out of 5

    Verona Tromp (verified owner) – January 30, 2022

    Have not broken yet.

14. Rated 5 out of 5

    Marilie Miller (verified owner) – January 26, 2022

    everything I expected

15. Rated 5 out of 5

    Tatum Schmeler (verified owner) – January 20, 2022

    These blades fit perfectly on my 9″ Ryobi band saw. Cut smoothly.

16. Rated 5 out of 5

    Laurel Bergstrom (verified owner) – January 17, 2022

    Worked for exactly what i needed. Cut through my wood like butter

17. Rated 5 out of 5

    Jordane Greenholt (verified owner) – January 14, 2022

    Fit my ryobi band saw perfect. Holds up decent under even thick hard wood.

18. Rated 4 out of 5

    Michael Lakin (verified owner) – January 13, 2022

    Great product. Durable. Long lasting. Very satisfied.

19. Rated 5 out of 5

    Patricia Walker (verified owner) – January 13, 2022

    Worked great on my Grizzly tabletop bandsaw. Was sawing oak from pallets.

20. Rated 4 out of 5

    Sincere Powlowski (verified owner) – December 30, 2021

    Saw blades work well, but they don’t last that long cutting harder woods.