Bosch 15 Amp Corded 10 in. Dual-Bevel Sliding Glide Miter Saw with 60-Tooth Carbide Saw Blade
$598.99
Bosch Dual Bevel Glide Miter Saw features the smooth cutting motion, accurate performance and space-saving design. Easy to handle.
In stock
Description
Bosch CM10GD 10 In. Dual-Bevel Glide miter saw delivers accuracy and cutting control at all angles, as well as durable precision throughout the life of the tool. The innovative Axial-Glide System provides wider cross-cuts, enhanced alignment and smoother glide, and the compact design takes up to 10 In. less front-to-back workspace than a slide miter saw. With a 15 Amp motor providing 4,800 no-load RPM, there is plenty of power. Adjustable miter and bevel detents enable users to make precise common miter and bevel cuts, and the override allows for easy angle adjustment. The bevel lock lever and range selector are located safely upfront so users don’t have to reach around behind the saw to make a bevel adjustment.
- Expanded cutting capacity: 12 in. horizontal capacity (nominal); 5-1/2 in. vertical capacity against the fence (base); 6 in. crown capacity against the fence (45° spring)
- Upfront bevel controls all-metal bevel lock lever and range selector located upfront for quick and easy bevel settings without reaching behind the saw
- Chop/crown lock: locks head in place for maximum chop cutting capacity for upright base molding and nested crown molding
- Tall sliding 4-1/4 in. fences: for easy bevel setups and increased crown and base molding capacity
- Large easy-to-read uniform bevel and stainless-steel miter scales: 52° left/60° right miter capacity; 47° left/47° right bevel capacity with marked detents and roof pitch angles
- Includes: 10 in. 60-tooth blades, material clamp, dust bag
- Adjustable miter detents: detents at 0°, 15°, 31.6°, 22.5°, 45°, 60° right super-accurate and durable design
- Push-button miter detent override easy-to-access thumb actuated control right up front for fine miter angle adjustment
- Bevel detents: 0°, 33.9°, 45° left/right for accurate cuts
- Category best 90% dust collection optimized for cutting 2X material with a vacuum
- Ergonomic ambidextrous trigger handle with soft grip large form fitting ergonomic handle provides comfort for all-day use
Additional information
| Weight | 64 lbs |
|---|---|
| Dimensions | 30.00 × 21.50 × 23.00 in |
| 45 Degree Crosscut Capacity Maximum | 3.25 x 12.5 |
| Included Accessories | Allen Key/Wrench |
| Table Width (in.) | 27 |
| Table Length (in.) | 13.75 |
| Power Tool Features | Electric Brake, Positive Stops |
| Portability | Bench |
| Model | CM10GD |
| Miter Saw Type | Sliding Compound |
| Maximum Speed (rpm) | 4800 |
| Maximum Degree Miter Cuts - Right | 60 |
| Maximum Degree Miter Cuts - Left | 52 |
| Maximum Cutting Thickness (in.) | 6 |
| Dust Collection Method | Bag |
| 90 Degree Crosscut Capacity Maximum - Left | 4 x 12 |
| Cordless/ Corded | Corded |
| Cord Length (ft.) | 6 |
| Construction Material | Aluminum |
| Condition | New |
| Color Family | Blue |
| Blade Diameter (in.) | 10 |
| Bevel Type | Dual |
| Bench & Stationary Tool Type | Slide Miter Saw |
| Arbor Size | 0.625 |
| Amperage (amps) | 15 |
| 90 Degree Crosscut Capacity Maximum - Right | 4 x 12 |
| Tools Product Type | Power Tool |
Reviews (87)
87 reviews for Bosch 15 Amp Corded 10 in. Dual-Bevel Sliding Glide Miter Saw with 60-Tooth Carbide Saw Blade
Only logged in customers who have purchased this product may leave a review.
Related products
Saws
Model# 6955-20
Saws
Model# 1590EVSK
Saws
Model# DW304PK
Drew Schamberger (verified owner) –
I upgraded from a dual bevel Hitachi to this and have not regretted it for a moment. This saw is worth every dollar. It cuts like butter, the arm allows for the saw to be built into my table with little rear clearance, dust collection works well, and it most importantly, it just works.
Vern Oberbrunner (verified owner) –
Real good product, sliding is amazing, The extension ascessory is différent and not as good as the 12 inches saw
Alicia Zieme (verified owner) –
It was easy to install the bracket to my compound sliding miter saw
Clovis Heathcote (verified owner) –
I brought this saw on dec 2020. It works really good but it is so heavy. The cutting and manufacturing is to its point but the thing i miss is a laser. I returned the saw because of its heavy weight and a missed laser in it. I loved the design and its work but, these two things get me down that I mentioned
Kaleigh Hettinger (verified owner) –
It was so worth it and so helpful to get myself this stand, made my project much easier and was not hard to assemble at all!
Anahi Heidenreich (verified owner) –
I love this miter saw. Works great. Only thing I would have wanted built into it would be the laser guide.
Josefina Feeney (verified owner) –
We purchased this saw and put it into service in a commercial luthier shop (custom guitar building business). We’ve seen a few reviews that mentioned setup accuracy issues from the manufacturer however ours was dead on accurate right out of the box and we suspect that those issues might be related to shipping handling after purchase. In the luthier trade we live and die by the thousandth of an inch accuracy for our end products and we’ve been exceptionally happy with this saw. We purchased it specifically to cut very shallow scarf joints on our neck fabrications and it required an add-on shop made 90 degree fence which we knew would be necessary to accomplish what we wanted. Dust extraction via a shop vac could be better and we haven’t connected it to the high CFM shop vac system but we’ve never had a bench model miter saw that was 100% in this regard so it’s really not an unexpected issue. Dual tilt and angle settings are easy and accurate and the sliding arm functions flawlessly. We had intended to replace the OEM 60 tooth ATB blade with an 80 tooth super fine cut however the supplied blade is functional for our needs currently. After using it for about 3 months in a production capacity we probably would have opted for the 12″ version to allow us a little deeper cutting capacity but space was an issue and we weren’t sure about the bench footprint until we received it. Setup front to back is 33″ at 90 degrees (the base itself is 22″ in the same configuration) and we have it bolted down to an 18.5″ deep bench. The feet are large enough that even with some overhang it’s still securely fastened to the bench. Overall we been extremely happy with the saw and highly recommend it.
Alvera Glover (verified owner) –
Solid stand, a little heavy to be portable, more of a stay at home piece.
Cayla Nicolas (verified owner) –
I have had this saw a week now and it is worth every penny. Smooth, accurate and really easy to operate.I particularly like the presets for crown moulding. The only minor glitch is the bevel control knob seems to have been damaged in transit and it came off when i went to use it. Also the Allen wrench for adjustment was missing. I have contacted customer support and await their response.
Amparo Davis (verified owner) –
I have this saw almost 2 years and precision is still like day one. This saw is amazing and every pro should invest on this rather then getting sliding mitersaw. You can cut any material with it saw has plenty power. Since its so precise you dont waste no material (speacially croen mouldinh) everytime cuts it dead on. I purchased the ls010 laser too so no more guessing where the blades is gonna land. Bevel control in the front makes bevel cuts a breeze. You can move from right to left in matter of seconds. No more leaning back to saw to adjust the bevel.
Marisa Kuhic (verified owner) –
There is a lot that i like about this saw. It is my upgrade from the slidig saw and i love it. Pros:Smooth gliding action, you can put right against the wall so it’s a space saver, all controls are in the front of the saw so you dont have to reach out in the back to set your bevel cuts, cutting angles above 45° degrees also helpful 47 bevel and 60 miter, you can lock arm in the right position to cut crown moldings also cutting depth adjustment for cutting notches or something else.Cons:Material supporting clamp is hard to use and takes too much time with that screw type adjustment I would recommend some type of quick locking clamps for it.Dust extraction is not too bad but could be improved, i have made some improvements to it and now it catches more dust.This saw is not cheap so should have nice laser guide right out of the box.Saw is pretty heavy so not very portable by one person, i have to use wheeled stand to transport to the job site and it takes a lot of space in my truck.
Rachel Farrell (verified owner) –
This miter saw is very high quality and worth the price. The motor is powerful and the hinge arm is extremely smooth, sturdy, and compact which allows placement close to the wall. The dust collection boot could be larger but is an easy fix.
Anibal Lebsack (verified owner) –
This saw took very little dialing in to setup. It was practically setup square and accurate out of the box. The glide mechanism is incredibly smooth with very little lateral movement.
Horace Predovic (verified owner) –
I bought this about 6 weeks ago along with the portable stand. Both items are great! Saw is powerful and well designed. I did have one small issue; The large blue knob that sticks out on the front of the saw was smashed but the packaging was perfect so I believe this happened at the factory. I called and requested the replacement part, received it a few weeks later and put it on- no hassles.
Florida Schmitt (verified owner) –
Barely any assembly required. Saw is easy to use, up front controls are a little complicated at first but much nicer than having to reach behind. Fits with very little overhang on a 25″ counter and rotates out of the way when not in use. Blade guard has a tendency to get caught/deflect during some cuts, and there is a small amount of lateral deflection during sliding cuts. Dust collection is surprisingly good when hooked up to a Festool CT vac with a 27mm hose and expect to see even better collection with a larger diameter hose. Overall, this is a very good saw with an excellent crosscut capacity but minor deflection issues in the guard and wider cuts.
Miguel Grady (verified owner) –
Thus far very happy with this saw, lives up to its advertising. Smooth action, easy adjustments. Have it mounted on a Ryobi miter saw stand, works well.
Raina Koelpin (verified owner) –
Nice piece, heavy duty, and affordable. Just don’t like the screws that secure saw to stand, cheap.
Vernice Luettgen (verified owner) –
Very accurate, good dust collection . easy to use
Ashly Kihn (verified owner) –
I bought this saw because of the innovative design. It is an excellent product and requires less space than the competition. I do have a concern I would like to resolve. When I put my piece to be cut on the saw, secure it in place, and then move the saw across across the workpiece without the blade rotating it will leave tiny saw tooth inventions on the workpiece. This is my way of checking the cut will match my intentions. Unfortunately when I do make the cut, it does not follow the line established in the setup. If I could resolve this issue I would rate the product at the top of the scale.
Ed Farrell (verified owner) –
Given as gift; recipient was very pleased.