Bosch Daredevil Stubby Length Spade Bit Set (3-Piece)
$10.00
Bosch Daredevil spade bits deliver the fastest drilling performance possible through wood, up to 10X faster than conventional spade bits. The bit as a full-cone threaded tip that pulls it through the wood, offering best-in-class speed through 2x4s. Ideal for clean-boring a lot of holes through wood fast to run conduit or pipe, these bits deliver a drilling speed and a force performance that sets them apart; these are not bits for counter sinking or dowling.
In stock
Description
Bosch Daredevil spade bits deliver the fastest drilling performance possible through wood, up to 10X faster than conventional spade bits. The bit as a full-cone threaded tip that pulls it through the wood, offering best-in-class speed through 2x4s. Ideal for clean-boring a lot of holes through wood fast to run conduit or pipe, these bits deliver a drilling speed and a force performance that sets them apart; these are not bits for counter sinking or dowling.
- Contoured paddle design – improves speed with faster chip removal
- Spur-and-reamer tips – provides cleaner holes by clearing chips faster
- Hex shank – improves bit grip and allows use with a variety of drill types
- Premium bit material – combined with innovation for great performance and life
- 1/4 in. hex power groove shank allows for use in a wide variety of drill types
- Do not use in drill press.
- Incudes: (1) 5/8″, (1) 3/4″, (1) 1″
Additional information
| Weight | 0.28 lbs |
|---|---|
| Dimensions | 0.55 × 4.42 × 8.43 in |
| Bit Material | High Carbon Steel |
| Color Family | Blue |
| Drill Bit Type | Spade |
| Drill Bit Type(s) Included | Spade |
| Drilling Depth (in) | 3 |
| Individual/Set | Set |
| Min Chuck Size Required | 1/4 In. |
| Model | DSBS5003 |
| Number of Pieces | 3 |
| Reconditioned | No |
| Self-Feeding | Yes |
| Shank Diameter | 1/4 in |
| Shank Diameter (in.) | 0.25 |
| Shank Style | Hex |
| Tools Product Type | Power Tool |
Reviews (79)
79 reviews for Bosch Daredevil Stubby Length Spade Bit Set (3-Piece)
Only logged in customers who have purchased this product may leave a review.
Related products
Drill Bits
Model# 48-28-1010
Drill Bits
Milwaukee Selfeed High-Speed Steel Wood Boring Bit Set (7-Piece)
Model# 49-22-0130
Drill Bits
Bosch 20 in. x 3 in. Hammer Steel 1-1/8 in. Hex Chisel for Demolition Hammer
Model# HS2164
Drill Bits
Model# 282269
Drill Bits
Model# 48-20-8852
Drill Bits
Model# FB-015
Drill Bits
Model# FB-003
Drill Bits
Model# 49-56-0247
Kallie Bednar (verified owner) –
They drilled through the with no problems. Just what I needed to get in tight spots.
Keara Turner (verified owner) –
Great for getting in narrow spaces when a standard spade would fit. I like the tip that steadies the bit so I’m not all over the place. Use this between floor boards running wires.
Jayce Schmitt (verified owner) –
They are very good drill bits. Easy to drill with the self feeding screw on the end. I had to push a little at the very end of the hole. I would purchase these again.
Aron Pfeffer (verified owner) –
Worked as advertised.
Cordia D’Amore (verified owner) –
Cut through up to two floor joists very easily and fit I between the joists that were 12 inches OChighly recommended
Margot Rogahn (verified owner) –
This was bought to a job of drilling for wiring job between joist
Heloise Schneider (verified owner) –
very handy in tight spots
Zoe Sawayn (verified owner) –
It is true, these bits will cut through wood 2×4 much faster than standard ones. Just don’t make the mistake of hitting a nail or other hard items. Once the little end tips are bent over or dull, the blade is almost useless. Back to the slow speed of a standard spade drill. Disappointing!
Florian Thompson (verified owner) –
These tear easily through dimensional lumber. They leave a good clean cut. Only downfall is at the end of the hole as soon as the screw is just about out it no longer bites. If you are going through a 4×4 it is a little tight in there and difficult to force the bit the rest of the way through.
Hipolito Ebert (verified owner) –
Small enough to get in between studs and small areas. Strong, caught an unknown imbedded nail and barely made a Knick on the bit. Highly recommend.
Torrey Dibbert (verified owner) –
Worked for the project I working on
Gonzalo Hagenes (verified owner) –
excellent drill bit for boaring holes thru pylwood, flooring, studs, 2×6 decking and framing, the screw bit keeps the hole true and helps to keep the bit from swaying
Brycen Funk (verified owner) –
Short stubby bits have made it easier to get into tighter areas
Vilma Kuphal (verified owner) –
These bits are a great value. The bits quickly cuts the holes. Most important the short length allow you to get into tight places. Every woodwork should have a set.
Nasir Orn (verified owner) –
Performed very well
Xander Hayes (verified owner) –
I bought these to help expedite the installation of the electrical wiring in my 2 outbuildings. The shorter length allowed the normal sized 1/4 in impact drill to be used in the 16 inch on center in between wall space without having to angle the cut. Worked flawlessly. These are sharp & easy to use. These bits bite in & didn’t wonder off due to the threaded tips. Great Purchase!
Catherine Kovacek (verified owner) –
Very good product. Work well at low drill speed. Quick change is great. A bit disappointed that it is made in China. Expected German quality.It is BOSH after all.Time will show…
Savanah Lind (verified owner) –
The best money I have ever spent on a tool! I didn’t even have to apply pressure on the drill; these bits are self driving.
Moshe Batz (verified owner) –
A simple tool that does what it should.
Keith Rutherford (verified owner) –
it is still working. we hit a nail the first drilling.