The MX330 Mid-Tower Case from COUGAR features a simple design with a transparent side window panel for you to show off your system’s internals. Inside is plenty of space, enough to fit a standard ATX motherboard, multiple graphics cards, and up to four storage drives. It also supports up to six 120mm fans for efficient cooling. Enthusiasts and users who are looking into water cooling should note that the MX330 can support up to a 240mm radiator placed at the front as well as two 120mm radiators at the top and rear. The front panel provides access to two USB 3.0 and two USB 2.0 Type-A ports, as well as audio in and out jacks.
COUGAR MX330 Mid-Tower Case
$37.49
In stock
Description
Additional information
Weight | 11.75 lbs |
---|---|
Dimensions | 20.25 × 19.5 × 9.75 in |
Motherboard Support | ATX, Micro-ATX, Mini-ITX |
Maximum Radiator Size (Rear) | 120 mm |
Dimensions (W x H x D) | 7.68 x 18.62 x 16.81" / 195 x 473 x 427 mm |
Built-In Lighting | No |
Material | Steel, Acrylic |
Windowed Panel | Yes |
Display Connections | None |
Audio Connections | 1 x 3.5 mm Input<br />1 x 3.5 mm Output |
Connections | 2 x USB Type-A (USB 3.1 / USB 3.2 Gen 1)<br />2 x USB Type-A (USB 2.0) |
Filter Locations | Bottom, Front, Top |
Fan Controller Included | No |
Fan Mounting (Internal) | None |
Maximum Radiator Size (Top) | 120 mm |
Maximum Radiator Size (Front) | 240 mm |
External Drive Bays | 1 x 5.25" |
Fans Included (Rear) | 1 x 120 mm |
Fan Mounting (Bottom) | None |
Fan Mounting (Top) | 2 x 120 mm<br> |
Fan Mounting (Side) | None |
Fan Mounting (Rear) | 1 x 120 mm<br> |
Fan Mounting (Front) | 2 x 120 mm<br> |
Supported PSU Size | ATX |
CPU Cooler Height | 6.10" / 155 mm |
Maximum GPU Length | 13.78" / 350 mm |
Expansion Slots | 7 x Full Height |
Internal Drive Bays | 2 x 2.5/3.5"<br><br />2 x 2.5"<br> |
Warranty Length | Limited 1-Year Warranty |
Reviews (109)
109 reviews for COUGAR MX330 Mid-Tower Case
Only logged in customers who have purchased this product may leave a review.
Related products
Computer Cases
Rated 4.00 out of 5
$44.99
Computer Cases
Rated 3.00 out of 5
$190.17
$169.59
Computer Cases
Rated 4.57 out of 5
$48.79
$34.99
Computer Cases
$199.20
Krista Hirthe (verified owner) –
B&H is amazing website they have great products and great service
Gino Keebler (verified owner) –
Looks great. Sturdy. Good able management options. This was my first build and I had no problems in the case department. I’ve been using it about a week so far.
Domenico Hammes (verified owner) –
Was just as described, works as intended
Alfredo Grady (verified owner) –
To start off the case design is beautiful and for about $50 you can’t beat it. It came with extra screws and standoffs. However the only downside is a threading wasn’t complete making it a pain to put in one standoff. I had to take a pair of vice grips to force the standoff into position. Take this with a grain of salt as it was a minor imperfection. Other than that I was able to build my whole pc and have it function. You can house a total of 5 fans but I only used 3. Good case, small imperfection on the manufacturers side 8/10.
Esteban Brekke (verified owner) –
This is the first case Ive ever purchased, but from my experience with it I cant really find fault. Theres plenty of ventilation, plenty of front USB ports, and construction that feels sturdy. Another big plus for me is that the design is very discreet for a gaming-oriented console. It looks sleek and gives you a great view of the guts without trying way too hard to look cool. Theres a lot to be said for classiness I think, and this cases aesthetic fits that perfectly. The one thing I would say against it: I wish the front plate had a better unlatching mechanism than it does. As it stands, every time I had to remove it I was scared of breaking it.
Pink Beier (verified owner) –
Sadly the case came broken, not entirely but the leg stand on the right side while unboxing the part just fell right off. I guess 40 dollars down the drain is not bad.
Lilla Tillman (verified owner) –
I resently bought this case for my home pc, and ftp server made of old pc parts that I’m not in the need to rid myself of. I was looking a while for a petite case to hold a full atx motherboard, and this case is a tight fit indeed. It fits all of my parts including a 240 aio water cooler and full complement of fans. with a open mesh front and top grill its great for stuffing inbetween a couch and end table, or any nook you can squeeze it in, and for ~$50 dollars its a steal. although its a bit tacky, when stuffed next to my entertainment center and 45 degree fireplace wall it does nothing but blend it.
Saul Kohler (verified owner) –
I was looking for something (1) $50, (2) with full acrylic/glass side, and (3) with slot for CD/DVD drive. You’d be surprised how few cases anymore meet those needs, esp. #3. This one fit the bill. I put a 240mm radiator in the front and two more 120mm fans up top, and the inside stays nice and cool. Cable management worked great for the most part — minor challenge fitting cables behind the mobo at the top-right because the DVD drive was in a tight spot, but it worked out. I don’t much care for the punch-out metal strips at the back or the weird crossbar piece that goes across all the PCIe card slots on the exterior of the back, but these are minor gripes.
Karianne Heller (verified owner) –
Simple case with PS tucked away in compartment. Not for massive builds but a full atx fits snuggly. Easy to get to everything except plugs on bottom of board- that’s pretty standard though. Everything outside is sturdy and easy to operate
Charlotte Gerhold (verified owner) –
I like the design and layout, but like I’ve read from other reviews, the quality control of this case isn’t the best. The case was majorly dented along the bottom left edge that kept the case from sitting level. It wasn’t something I could bend back even if I wanted to. As always, B&H is great. They professionally, politely, and quickly accepted my return. I chose not to get another case because the problem seems to be at the manufacturer. Too bad.
Osbaldo Green (verified owner) –
I don’t know much about computer cases but I was able to install everything and get it to work without too much effort. However, some of the wires from the front of the case to the motherboard were too short to route in the back of the case so they had to be run directly to the motherboard in the front. Also, I wish they provided more room for unused power supply cords. I had to squeeze them into what small space was provided. On a positive note, the airflow through the case is awesome. I just have a front and back fan installed and it runs very cool. Not bad for a budget case IMHO.
Alta Jerde (verified owner) –
Love this case. Plenty of room for my atx board and components. Good space for cable management. I was a little concerned when the box arrived, as it was dented. When I opened it up, no bumps or bruises. Thanks B&H for fast shipping and a great price!
Titus Sipes (verified owner) –
Pretty much everything I wanted. The HDD drive trays are made of plastic and break easily sadly, but once you get around that, its a pretty nice case.
Kiley Ziemann (verified owner) –
Pro: Reasonable price, sturdy construction, separate PSU enclosure so nonmodular power supply isn’t an eye sore, awesome air flow, alot of front USB at this price point, plenty of room for hard drives and ssd’s, great cable management, reasonably attractive, includes dust filters. Con: Acrylic side scratches easy and doesn’t fit well, advertised space for six fans but only holds five case fans (I suppose they are counting the psu fan), thumbscrews feel cheap and look worse, snap off expansion slots. In summary, I’m actually really happy with this case. Functionally works just as good as any $100 case for half the price. The only thing the more expensive cases do better is looks which is a matter of opinion. You cannot go wrong with this case.
Winifred Powlowski (verified owner) –
The case while good was damaged when I opened the box.
Angela Johnson (verified owner) –
this is the second one i have ordered and i like them both. they have lots of room in them and have good air flow. the first one had a striped standoff and the second one had a cross threaded standoff. they were both in the same place. other then that its a good case for the price. i would buy it again.
Naomie Ankunding (verified owner) –
Had no issues with it other than the standoffs for the motherboard being kind of awkward with the motherboard I chose and the quality of some bits being a bit disappointing.
Alison Krajcik (verified owner) –
I’m new to B&H, but I’ve enjoyed this purchase process, and will probably be back for more toys. I’m not doing a standard PC build (no (usual) motherboard), but the case was pleasant to work in, compared to experience in the distant past. For its purpose, I got a used one, and it is in great shape. The PSU and a full set of fans went in effortlessly, and I had places to route wiring. The case is prepared with a couple of punch-outs, unobtrusively on the right side, to put top fans on the outside, in case a radiator takes too much space on the top, inside.
Neha Gorczany (verified owner) –
Its an okay board, but you could definitely do better if you spent the time to shop around.
Wallace Gleichner (verified owner) –
I purchased this case for a new build. I wanted the glass panel and for the price this looked like a solid option, turns out I was right. I fit everything I wanted to into the case.