Get plenty of room for parts and easy expansion with the Panzer Max Full-Tower Gaming Case from COUGAR. Designed for gamers, overclockers, and other power users, this full-tower case supports ATX, Micro ATX, Mini ITX, E-ATX, and CEB boards. Use two 5.25″, two 2.5/3.5″, and four 2.5″ bays to install optical and storage drives. Eight expansion slots support up to four double-slot graphics cards up to 15.35″ in length. Also supported are CPU coolers and ATX PSUs measuring up to 6.69 and 8.7″, respectively.
Keep components cool thanks to three preinstalled 120mm fans, plus support for up to eight fans and four radiators. Streamline cooling with the integrated fan controller and use the dedicated cable management space to keep cables from restricting airflow. Utilizing a steel frame and acrylic windowed side panel, this case shows off your components and interior lighting. Ports on the I/O panel include two USB 3.1 Gen 1 and two USB 2.0 Type-A ports, plus mic and audio ports.
Titus Bradtke (verified owner) –
Fans were broken, there was no damage to the packaging or the cabinet, they just installed broken fan and there was no quality check to pass this.
Savanna Ward (verified owner) –
I got this case because I wanted one that was super spacious for my first build. I could not be happier! Moving the fans around was a breeze, and the size left tons of room not just for cable management, but to be able to work and install everything inside.
Nyah Goyette (verified owner) –
I bought this case because it had space for 2 DVD-rom drives and said it will support a 280 cooler. With the Arctic Liquid Freezer II 280 in place I could not mount the ATX size motherboard. I had to put the fans on top of the case in a pull configuration, and cut a hole in the wire mesh on top to fun the fan wires through. When I tried to install the DVD-rom drives the hit the coolant hoses. I had to flip the radiator around (and remove all motherboard screws to move it out of the way to get the radiator out) but now it interfered with the rear fan so I had to remove it entirely. Then I had to cut more holes to route the fan power cable. In addition…. 1 bracket mounting screw was missing. The HDD Led cable was not marked for positive or negative so you have a 50-50 chance of plugging the wires in the right way. It would be nice to have a USB-C connection on the front too. So I got it to work, but if I had to do it again I would get a different case.
Hazle Herman (verified owner) –
came with no fans only enemies
Aylin Heidenreich (verified owner) –
a lot of space and and easy to install your system in there
Tamara Padberg (verified owner) –
Arrived at home in perfect condition. For the money you cannot go wrong with this purchase. Quality product all the way. This is a very well designed product. Not a single complaint.
Fern Miller (verified owner) –
Big and Functional.
Howard Spinka (verified owner) –
From reading some reviews on the internet I got the impression that there was not much quality control on this product and I was right. Physically the only cosmetic defect was one of the mesh screens was bent in one corner, easily fixable. The big problem I ran into late in the building stage was realizing not all the motherboard standoffs had the same thread type. Most of them were normal but 2 were a hair larger or different thread. Think of it this way, most motherboard standoffs are #6-32 UNC I think, whereas these two must have been like #6.5-32 UNC. I just screwed in some course thread screws which worked and called it a day. Aside from that oddity this case is all I wanted and more. Coming from a decent airflow mid tower to this, my RX6700 runs 8c cooler on the hot spot and my 3700x hits 60c at 90% load compared to 80% load at 60c. One thing I would recommend everyone do is if you have a bottom case mounted fan to take a small drill bit, measure out where your fan is in the case and drill holes 1/2 inch apart in the PSU cover that comes with the case if you use it so that the wires from the PSU are covered. Helped my GPU temp drop another 3-5c. If you drill the holes like I did then they are basically unnoticeable. All in all I’m happy and I’m going to buy another for my wife’s build.