CyberPower PDU20SWHVIEC10ATNET Switched ATS Power Distribution Unit

Designed for telecom installations, network closets, data centers, and other demanding electrical applications, the PDU20SWHVIEC10ATNET Switched ATS PDU from CyberPower is a switched automatic transfer switch (ATS) power distribution unit (PDU) that provides an output of 200-240 VAC and inputs of 200-240 VAC at 50/60 Hz with a maximum current of 20A, which has been derated to 16A. It distributes unfiltered electrical pass-through to 10 rear outlets, which are made up of eight IEC-320 C13 and two IEC-320 C19 outlets from two redundant IEC-320 C20 plugs. Dual power cords can be plugged into separate power sources to provide redundancy to single-corded connected equipment. If power for the primary source exceeds the lower or upper thresholds, or if power fails, the PDU will switch to the secondary power source to ensure continuous operation. The PDU will switch back to the primary power source when incoming power becomes stable.

The PDU20SWHVIEC10ATNET includes an RMCARD203 SNMP/HTTP card. With the SNMP card and an IP address on the network interface, users have real-time monitoring and outlet control of the PDU. The switched outlet receptacles can be managed individually or collectively. An integrated LCD panel provides local monitoring of the PDU and on/off control for the outlets. It can also be used to measure the electrical current, displayed in A, used by connected equipment. The LCD panel also shows input and output voltages, active power consumption levels, displayed in kW, and the hardware and firmware versions.

Built with a 1 RU form factor that allows for horizontal mounting, the PDU20SWHVIEC10ATNET has a rugged, industrial-grade metal housing, a 10′ AC power cord, and a cord retention tray. It is also UL- and CSA-certified by ETL, and Class A FCC-certified.