The Dasco Pro 3-Piece Marking and Starter Kit has punches designed to ensure 100% impact for center marking and driving pins or bolts. Their hexagonal stocks keep them from rolling off flat surfaces when not in use. Made in USA.
- Center and prick punches designed to mark metal and other materials softer than the point end
- Starter punch used for driving pins or bolts from holes having a forced or drive fit
- Forged from the finest high grade domestic steel for long-lasting use
- Full-penetration heat treatment for maximum cutting strength
- Hexagonal stock design prevents punches from rolling off workbench
- Set includes 5/16 in. center punch, 3/8 in. prick punch and 3/32 in. starter punch
- Meets or exceeds ANSI standards
Jeramy Leuschke (verified owner) –
Does what it’s designed to do. Go ahead and buy one.
Leopoldo Stracke (verified owner) –
Does the job required of them. Good size and balance.
Johnny Maggio (verified owner) –
I had to make an indent on a metal pipe that is approximately 1.5 inches in diameter. This is nearly impossible by holding the electric drill by hand. This tool made enough of an indent so that the drill stayed centered and I was able to make the hole. This in turn did not mar the center punch tool. Additionally, I was pleased that it was not made in China.
Vanessa Wehner (verified owner) –
I needed to center punch some steel tubing on my 16′ trailer rails. These did the job easily.
Casandra Schowalter (verified owner) –
Very nice Machine Work was done on these punches and they do not slip out of your fingers.
Ruby Dickinson (verified owner) –
Quality of the steel was excellent and the punch maintained a hard sharp point
Simone Daniel (verified owner) –
Nice solid product!
Catherine Satterfield (verified owner) –
I am very happy with this set. I have been buying the cheap version of this set and they would wear out fast. I plan on buying more of their products in the future.
Alessandra Breitenberg (verified owner) –
Good for the Price
Shawn Torp (verified owner) –
Used this to drill stop some cracked welds offshore where precise drilling is required. The punches didn’t rust much even though it was immersed in salt water and I did break a point or 2 but they are easy to sharpen and held up really well considering the rough usage. Will buy again.
Bradly Cassin (verified owner) –
I needed to score some sheet metal before drilling. This set worked great.
Leonora Schinner (verified owner) –
Did the job at a reasonable price
Tomas Kulas (verified owner) –
I needed a new center punch but for the price I bought this kit. I’ve only used the center punch so far, but the point is is not showing any deformation after 40 or so strikes
Carolyne Armstrong (verified owner) –
What can I say–I needed drill a bunch of holes in some metal and I bought this set to get a variety–they work well
Chasity Reichel (verified owner) –
Great starter set for center punches and for a small drift.
Hillard Beer (verified owner) –
The center point chisel is excellent for what I use it for, to drill out broken screws.
Micaela Maggio (verified owner) –
The steel on the punches seems to be hard enough to punch most materials. I used it to punch a start hole for a stainless steel sink. It worked very well.
Renee Dickinson (verified owner) –
This is a very good product,very easy to use.It come in a excellent container.. It reseals very good between usages.
Dorian White (verified owner) –
Worked Great!!
Seth Predovic (verified owner) –
I needed to replace my center punches and these fit my needs.