Delta 3HP 26 in. Industrial Dual Drum Sander
$2,499.00
Acquire a convenient tool to complete your tough tasks at the jobsite with this Delta Industrial Dual Drum Sander.
In stock
Description
The Delta 26 in. Dual Drum Sander offers two 4 in. dust ports for efficient dust collection. It is also equipped with tool-free drum-wrap tensioning clamps that make installation and removal of sanding strips easy, helping reduce downtime. This design features a heavy-duty steel frame with a superior finish for long-lasting durability.
- Industrial 3 HP, 230-volt, 60 Hz, 1-phase main motor with magnetic controls
- 1/6 HP, 1-phase, variable speed feed belt motor with feed speeds from 3 FPM to 20 FPM and drum speed of 1550 RPM
- Increased capacity allows for sanding material up to 12-1/4 in. D x 25-1/2 in. W
- Independent adjustable rear drum offers one-pass sanding capability using 2 grits, reducing processing time
- Rear roller adjustment dials ensure rear drum is level
- Dust ports allow for efficient dust collection, requiring a total of only 600 CFM
- Includes (2) 4 in. integral dust ports, feed belt, (2) sanding drums, (1) 80 grit and (1) 120 grit sanding strips
- Magnetic on/off main motor switch and removable key switch for variable speed feed belt motor
Additional information
| Weight | 418 lbs |
|---|---|
| Dimensions | 48.30 × 32.68 × 51.97 in |
| Amperage (amps) | 0 |
| Minimum feed height (in.) | 3 |
| Variable Speed | No |
| Tools Product Type | Power Tool |
| Table Width (in.) | 46 |
| Table Length (in.) | 31 |
| Reconditioned | No |
| Power Tool Features | Lockout Power Switch, No Additional Features |
| Portability | Stationary |
| Model | 31-481 |
| Maximum feed rate (ft./min.) | 20 |
| Belt length (in.) | 92.5 |
| Maximum feed height (in.) | 0 |
| Maximum Speed (rpm) | 1550 |
| Dust collection type | Port |
| Cord Length (ft.) | 5 |
| Condition | New |
| Color Family | Multi-Colored |
| Bench & Stationary Tool Type | Drum Sander |
| Belt width (in.) | 5.125 |
| Voltage (volts) | 230 |
Reviews (11)
11 reviews for Delta 3HP 26 in. Industrial Dual Drum Sander
Only logged in customers who have purchased this product may leave a review.
Related products
Sanders
Bosch 2.5 Amp 5 in Corded Single Speed Palm Random Orbital Sander/Polisher
Model# ROS10
Sanders
Makita 3 Amp 5 in. Corded Palm Grip Random Orbital Sander with Dust Bag, Hard Case
Model# BO5030K
Sanders
Model# 9031
Sanders
Model# MS2000
Athena Rutherford (verified owner) –
Well made, runs smooth,very little assembly. Dose a great job.
Hubert Ullrich (verified owner) –
This is an excellent sander. The variable speed feed is great. This machine is a must for anyone building furniture.
Liliane Monahan (verified owner) –
Home Depot was really good at getting the sander to my house and in my shop. Thanks.. The sander works great.
Osvaldo Schamberger (verified owner) –
I am very happy with how well the sander functions.
Rickie Block (verified owner) –
Awesome sander, built well, handles big jobs with ease.
Bobby Sauer (verified owner) –
I ordered this sander and it came in a week early,witch was great! . I brought it to my shop connected the power and dust collection it far exceeds my expectations better than grizzly,shop fox,or other competitors to say the least. This machine will last you a life time , I got it on (Special Buy) for $1899.99 and saved over $300.00 dollars. Even if you have a small shop I would highly recommend this sander , I use mine for Kitchen counter tops standard 25” wide with 80 paper on the front roll and 150 paper on the rear very slow speed strait to finish and than glass coat epoxy two coats 1/4” thick , same for live edge table tops , super great machine and buy!!!!!
Alfreda Reynolds (verified owner) –
I ordered this sander and it came in a week early,witch was great! . I brought it to my shop connected the power and dust collection it far exceeds my expectations better than grizzly,shop fox,or other competitors to say the least. This machine will last you a life time , I got it on (Special Buy) for $1899.99 and saved over $300.00 dollars. Even if you have a small shop I would highly recommend this sander , I use mine for Kitchen counter tops standard 25” wide with 80 paper on the front roll and 150 paper on the rear very slow speed strait to finish and than glass coat epoxy two coats 1/4” thick , same for live edge table tops , super great machine and buy!!!!!
Filiberto Kuhn (verified owner) –
This sander is exactly what I expected from Delta, a quality piece of equipment. It’s exactly what my shop needed. The only issue I have is, I would have liked information on a link for replacement sandpaper.
Arlie Carroll (verified owner) –
This is a light duty unit and works well for that purpose. You have to run hardwoods through in multiple passes and lightly skim with each pass. If you try to take more than approx 1/64″ or max of 1/32″ off you will jam the feed. If you follow this advice it will do a nice job. I would also say I would not reccomend this unit for high production, it’s just not built for that. It’s perfect for the hobbyist or woodworker that would have occasionally use. I would also recommend building and infeed and out feed table if you are running long boards. The sanding heads dig in if you don’t keep the board square to the table and feed tables help give that stability. I’d also use better grade of paper..The second head sandpaper tore after running a dozen boards through. I purchased a different brand of higher quality than Deltas paper and cut my own. I used an existing piece as a template…..overall it does a good job if used in a lighter duty application. I’m only using it now for a light sanding application in my drawer box assembly area. If you’re thinking about a unit for any production application spend the money and upgrade to a more commercial grade machine.
Ferne Sanford (verified owner) –
Initial impressions of the Delta 31-481 machine are good (this review is written after only 2-3 hours of use). The manual however is the worst I have ever seen for a pro-level tool. The machine is relatively heavy (about 400#), with center-of-weight low. This is great when feeding heavy pieces of wood through. Definitely read the Popular Woodworking drum sander tips before using – even if you are experienced with drum sanders! The thickness adjustment handle works smoothly but simply sits on top of the lead screw. This is beneficial – easily removed to access drums without changing thickness. It is also annoying as the handle comes off in your hand when vigorously changing thickness. The sander works smoothly and is surprisingly quiet. The machine arrived with sanding strips installed on the drums which was nice, however the medium grits used are far too course for my needs. Based on my INITIAL impressions, the dual drum sander is far superior to single-drum sanders. NEVER consider using the sander without a good dust collector attached and turned on! Will try to update this review after a few weeks of use, however my initial impression of the machine is very favorable.
Missouri Quigley (verified owner) –
Easy to assemble and works great.