Delta 1/2 HP Heavy Duty Bench Oscillating Spindle Sander with Tilt Table
$499.00
Introduce a durable and essential addition to your vehicle with the selection of this extra ordinary Delta Heavy Duty Bench Oscillating Spindle Sander with Tilt Table.
Only 10 left in stock
Description
The Delta Heavy Duty Oscillating Bench Spindle Sander features a heavy duty steel table support and bevel system that provides increased stability and long-lasting durability. It has smooth precision ball bearings that support the main spindle and heavy duty worm and gear mechanism drives the oscillations. It has a positive stop at 90 Degree and large bevel scale for accuracy and convenience.
- Powerful 1/2 HP, 115-Volt motor with 1725 RPM spindle speed and 29 oscillations per minute
- Fully enclosed, heavy duty steel frame construction for minimum vibration
- 14-3/4 in. x 14-3/4 in. precision ground cast iron table
- 15/16 in. oscillating action uses more of the sleeve, prolonging life of the sleeve
- Includes 5 interchangeable threaded spindles with 100 grit sanding sleeves (1/4 in., 1/2 in., 5/8 in., 1 1/2 in. and 2 in.), rubber drums on 1 1/2 in. and 2 in. spindles, 4 inserts, power lock-off pin, 2 1/4 in. to 4 in. dust port adaptor and 3 wrenches
- On-tool storage for all inserts, spindles and wrenches
Additional information
| Weight | 66 lbs |
|---|---|
| Dimensions | 17.32 × 16.93 × 20.87 in |
| Amperage (amps) | 10 |
| Reconditioned | No |
| Variable Speed | No |
| Tools Product Type | Power Tool |
| Table Width (in.) | 14.75 |
| Table Length (in.) | 14.75 |
| Spindle height (in.) | 0 |
| Spindle diameter (in.) | 0 |
| Power Tool Features | Lockout Power Switch, No Additional Features |
| Bench & Stationary Tool Type | Spindle Sander |
| Portability | Stationary |
| PT Horsepower (Hp) | 1/2 |
| Model | 31-483 |
| Dust collection type | Port |
| Cord Length (ft.) | 4 |
| Condition | New |
| Color Family | Multi-Colored |
| Voltage (volts) | 115 |
Reviews (7)
7 reviews for Delta 1/2 HP Heavy Duty Bench Oscillating Spindle Sander with Tilt Table
Only logged in customers who have purchased this product may leave a review.
Related products
Sanders
Model# 9031
Sanders
Model# 7345
Sanders
Model# BO4900V
Sanders
RIDGID 3 Amp Corded 5 in. Random Orbital Sander with AIRGUARD Technology
Model# R26011
Sanders
Model# 6101-6
Sanders
Model# R25011
Jules Hudson (verified owner) –
Smooth operation with no vibration. Does the job with excellent results.
Lorena Hammes (verified owner) –
I like the way the drums connect and also the heavy table.
Flossie Marvin (verified owner) –
exactly what i was looking for
Allie Collins (verified owner) –
Excellent, quiet running, just as expected.
Jairo Walker (verified owner) –
I was going to purchase a Harbor Freight spindle sander but changed my mind after checking out reviews and specks. I had a project and needed a spindle sander. This little Delta sander is a full 1/2 hp. and has plenty of power. On my first day I ran it for over 6 hrs. and the second day another 5 more. The sander seemed to run smooth, I did notice a little gear box noise but after 2 hrs it went away (broke in). I found out that the table inserts were slightly lower that the table and made my small parts tapered, I fixed the problem with tape on the under side of the insert to make them level with the top of the table. When I went to install the spindles on the sander I found the threads were rough and had small metal shavings left on them from machining. I buffed them so they would thread in smooth. This sander cost 3 times more than the other cheep ones, But its worth it. All though I think Delta could do a little better quality control.
Brendon Zboncak (verified owner) –
I’m very pleased with this product . It does all I was wishing it to do .
Rickie Bogan (verified owner) –
well worth the money ; smooth & quiet operation ; does an excellent job