Delta 30 in. T-Square Fence and Rail System
$441.87
Delta T-Square Fence and Rail System offers a steel guide tube with scale, front and rear support rails and mounting hardware.
In stock
Description
The Delta 30 in. (762 mm) T-Square Fence and Rail System is a great fence for the Delta 5000 Series saws with 30 in. tables. It is made from quality materials and has a 2 year limited warranty. It is made from 14-Gauge welded steel.
- 1-piece 14-Gauge 2 in. x 3 in. rectangular steel guide tube, mounted to on 1/4 in. section angle iron rail
- Mounting design attaches to Delta and most other table saws with cast iron tables
- Laminated 9 ply birch plywood sides are durable and non-marring
- Fence body constructed of 14-Gauge welded steel
Additional information
| Weight | 81 lbs |
|---|---|
| Dimensions | 45.00 × 19.00 × 7.00 in |
| Bench & Stationary Tool Type | Accessory |
| Ideally Used With | Table Saws |
| Model | BC30T2 |
| Tools Product Type | Power Tool |
Reviews (11)
11 reviews for Delta 30 in. T-Square Fence and Rail System
Only logged in customers who have purchased this product may leave a review.
Related products
Woodworking Tool Accessories
Model# DR82116
Woodworking Tool Accessories
Model# DR34128
Woodworking Tool Accessories
Milescraft Sign Crafter Complete Sign Making Router Jig Template Kit
Model# 1206
Woodworking Tool Accessories
DIABLO 1/2 in. x 5/16 in. Carbide Hinge Mortising Router Bit
Model# DR16560
Woodworking Tool Accessories
Milescraft Design/InlayKit Complete Kit for Routing Designs and Inlays
Model# 1207
Woodworking Tool Accessories
Model# DR16116
Woodworking Tool Accessories
Model# 59375
Woodworking Tool Accessories
Model# DR62XXX
Jaylon Tillman (verified owner) –
WATCH FOR SHIPPING DAMAGE!The product is good (it is a Biesemeyer!). The kit was missing one washer (I had the correct size on hand) and the biggest issue was that the end cap on the main rail was damaged (maybe in shipping or before). I didn’t notice it until I had it completely assembled (It was dark in the garage and on the extension end so I wasn’t paying attention to it). I also needed to use it right away so I didn’t take it apart.Check ever inch, especially the end caps right after you open it.
Maye Beer (verified owner) –
Have used this system on commercial saws, over 25 years in commercial shop, so i was excited to finally have one on my table saw at home.
Sibyl Bayer (verified owner) –
I wanted a quality rip fence for years, its not inexpensive but you get what you pay for. I installed it on a Jet Super Saw.
Mikel Keebler (verified owner) –
Works very nicely, but requires all new mounting holes to be drilled into craftsman saw.
Camron Cummings (verified owner) –
Got this for my husband for Christmas. He has an old contractor saw and it worked great on it.He was thrilled………..
Ima Pouros (verified owner) –
WATCH FOR SHIPPING DAMAGE!The product is good (it is a Biesemeyer!). The kit was missing one washer (I had the correct size on hand) and the biggest issue was that the end cap on the main rail was damaged (maybe in shipping or before). I didn’t notice it until I had it completely assembled (It was dark in the garage and on the extension end so I wasn’t paying attention to it). I also needed to use it right away so I didn’t take it apart.Check ever inch, especially the end caps right after you open it.
Marcel Collins (verified owner) –
I really appreciate how this kit was made for my old Delta Contractors table saw among others. This really helps to improve on the original stock rail system which had to be tapped into parallel before locking down. I have just installed and adjusted the new Beismer fence and am looking forward to using it soon.
Olaf Miller (verified owner) –
My Ridged saw was good, now its great. Had to drill a few holes but mounted up in two hours. Faster if you have help. I have been using Biesmeyer fences for years. If you need Accurate cuts you cannot go wrong with this fence system.
Alessandro DuBuque (verified owner) –
Awesome product. Very easy to set up and use.
Kailee Sporer (verified owner) –
very good fence
Giovanny Schaden (verified owner) –
I purchased the system to replace the original Biesemeyer Fence and rail system on my Delta Hybrid Table Saw model 36-714B. The front rail and Fence tube fit perfectly without any modifications. The Fence once adjusted was dead on accurate throughout the length of the fence.(Old one was bowing toward the blade in the center) Didn’t change the back rail because of modifications to it for an outfeed table but kept it just for future use (Painted the original back rail. I would have given this 5 stars except for in shipping the boxes were damaged and appeared to be opened and had been taped up. One of the boxes had a hole in it and the complete hardware kit was not inside the box. Kudo’s to Home Depot’s Bridgepoint store because they worked very hard to help me, however I contacted Delta and they promptly shipped me the replacement hardware kit. I am very happy with this purchase and highly recommend it. However the shipper gets a ZERO.