DEWALT Door Lock Installation Kit
$29.67
Use this brilliant DEWALT Door Lock Installation Kit to easily connect locks on wood and metal doors. Comes in yellow color finish.
In stock
Description
The DEWALT Door Lock Installation Kit helps you install door locks on wood and metal doors. It works for 2-3/8 in. and 2-3/4 in. backsets, and 1-3/8 in. and 1-3/4 in. thick doors. It features two bi-metal hole saws and a height alignment window for accuracy.
- Use to install door locks on wood and metal doors
- 2 bi-metal hole saws
- Height alignment window for accuracy
- Accepts common backsets of 2-3/8 in. and 2-3/4 in
- Fits common door thicknesses of 1-3/8 in. and 1-3/4 in.
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
Additional information
| Weight | 1.58 lbs |
|---|---|
| Dimensions | 9.63 × 7.75 × 4.88 in |
| Arbor included | No |
| Bit Material | High Speed Steel |
| Drill Bit Type | Hole Saw |
| Drill Bit Type(s) Included | Hole Saw, Specialty |
| Drilling Depth (in) | 3 |
| Individual/Set | Set |
| Material Cut | Wood |
| Min Chuck Size Required | 1/2 In. |
| Model | D180004 |
| Number of Pieces | 5 |
| Pilot Bit Included | Yes |
| Shank Style | Straight |
| Teeth Per Inch | 1 |
| Tools Product Type | Power Tool |
Reviews (74)
74 reviews for DEWALT Door Lock Installation Kit
Only logged in customers who have purchased this product may leave a review.
Related products
Drill Bits
Model# 48-25-2122
Drill Bits
Bosch 20 in. Hammer Steel 1-1/8 in. Hex Moil Point Chisel for General Chipping Work
Model# HS2161
Drill Bits
Model# DW2043 Z
Drill Bits
Milwaukee 18 in. x 7/16 in. QUIK-LOK Universal Extension Bit
Model# 48-28-1050
Drill Bits
Model# FB-007
Drill Bits
Milwaukee 1/4 in. X 3-1/2 in. Pilot Drill Bit For Hole Saw Arbor
Model# 49-56-8010
Drill Bits
Model# 48-20-8856
Drill Bits
Model# DW2045 G
Maximo Gerhold (verified owner) –
Very Easy to use and does a fabulous job every time
Enid Rogahn (verified owner) –
Looks nice, but I have not put it to use yet.
Kay Bergstrom (verified owner) –
I’m very pleased
Roberta Reilly (verified owner) –
Best one of the bunch I have used thus far!
Myah Graham (verified owner) –
The instructions were clear. It worked very well. It saved a lot of time!
Lisandro Wolff (verified owner) –
surprisingly low quality for dewalt, after a couple of doors the drill bit is already starting to fail. will do the job if you only need it for a small number of doors.
Asa Hane (verified owner) –
High quality product that was easy to use
Arnold Robel (verified owner) –
Being able to locate both holes from one measure was great. The large hole worked wonderfully. The smaller catch boring hole could not be trusted to center on the door and so was only used as a general template that needed to be visually adjusted after marking.
Monique Rippin (verified owner) –
I had doors that had knobs installed with holes that were undersized and off center. I picked this kit because the clamp was large enough to allow board behind the door for the pilot bit. Worked perfectly.
Delfina Anderson (verified owner) –
Works like a charm.
Gabriel Jacobi (verified owner) –
Great quality for the price and easy to use.
Justus Cassin (verified owner) –
This install kit will save you a lot of measuring and hoping you have the holes straight and in the right location. The locking knob on the rear is what sold me. No clamps in the way when you are drilling. Great tool when replacing slab doors,( just replaced 3) or making your own.
Gonzalo Muller (verified owner) –
Nice kit. Does what it is supposed to do. Easy to use.
Isadore Bradtke (verified owner) –
Worked well. Got the job done.
Annette Kassulke (verified owner) –
Overall very pleased with the product. It’s well-built and functions as intended. My only real concern is that the jig holes that the hole saw fits into seem to have taken excessive wear after only a few uses. But perhaps this is just from the initial “breaking in” of the product.
Dalton Kautzer (verified owner) –
Locking mechanism does not hold tight so jig moved a little when drilling into metal door. I used another clamp to hold it in place and then worked fine.
Lina Kemmer (verified owner) –
Concept is good but the plastic bushings are chewed up by the teeth of the hole saw during the beginning of the cut even after lubricating bushing and holesaw with teflon. After a couple of uses this affects the accuracy. I attempted to locate replacement bushings without success. I would give it 5 stars if replacement bushings were easily available at reasonable cost or if the bushing ID was slightly larger at the cutting end (a relief) to prevent tooth contact during initial cutting. I now see others have made similar complaints. It will work if you only have a few to do but if you are doing more than that look elsewhere. A simple relief for the teeth would have been a simple and inexpensive improvement to extend the usefulness and accuracy of this expensive tool.
Elyse Sporer (verified owner) –
Performed as described, except that the hole saw shaved off part of the plastic guide in the jig. Otherwise, a very helpful product.
Marcos Trantow (verified owner) –
Worked Perfect! It is plastic, but once you line it up, works great! Used multiple times with no issues.
Jena O’Keefe (verified owner) –
Needed to enlarge holes this worked great