The DHS790AT2 offers flexible power options-corded for unlimited runtime or cordless for portability powered by DEWALT brushless motor technology. Accuracy is delivered through adjustable miter scale with 11-positive stops and high visibility bevel scale the CUTLINE blade positioning system. The kit includes 2 60-Volt MAX lithium-ion battery packs, a dual port fast charger and the DC120A corded power supply. For a limited time get a bonus stand with purchase.
- Flexible power options-corded or cordless
- Accuracy cutline blade positioning system and highly visible miter and bevel scales
- Runtime-310 cross cuts in 31/4 in. base molding
- Portability-compact design weighs only 56 lbs.
- Ideal for cutting stair tread, crown molding and baseboard
- Includes saw, charger, 2-batteries, corded power supply, blade, wrench and dust bag
- DWX723-includes stand, convertible work stops/supports and 2-mounting brackets
- DWX723-weighs 35 lbs.
- DWX723-5-1/2 in. beam extends to support up to 16 ft. of material and up to 500 lbs.
- DWX723-work stops and supports can be quickly repositioned along the rail
- DWX723-extension lock levers allow for fast and secure tightening of extensions
- DWX723-mounting brackets allow for easy and secure mounting of miter saw to stand
Giovanni Dibbert (verified owner) –
Great saw, I own pretty much every Dewalt tool including miter saws before this one and this is so convenient when you’re on a job site with no power. It very powerful running on batteries which I was very surprised.
Hildegard Parisian (verified owner) –
I’m enjoying this purchase very much. What a great tool.
Melody Hoppe (verified owner) –
So the saw is great, cuts well. Batteries last a long time. Have used it numerous projects from rough framing, decks and trim. The saw is very heavy and hard to move around once the base for stand is attached.This is rated 3 because the dust control is your lungs. There is no dust control. The bag is a joke to make you think that it’s doing something but look up and it will be cloudy inside… or try to take a deep breathe it won’t be good. Even attaching a shopvac to the dust collector doesn’t help because no saw dust gets into the tube anyways.Again the convenience is great not having to run generators but just be warned the dust is crazy
Ron Durgan (verified owner) –
Excellent performance!
Austin Lind (verified owner) –
Pros: Sturdy, easy set-up and tear-down, gives consistent repetitive cuts.Cons: The material supports and stops are where this equipment falls short. They’re made of flimsy stamped sheet metal and not easy to adjust, though once set up, give consistent cuts.For the money, it’s a keeper.
Abdullah O’Keefe (verified owner) –
Bought w/ the Rigid rolling stand (AC9946) and recommend both. This is more tool than I’m likely to need (glorified DIYer – not much need to cut 16″ lumber) but was on sale for 699 and it got me excited. On the cusp of a larger scale upstairs remodel but have only done small jobs w/ it so far. Double bevel is so convenient. The two bevel stops and 45 override clip (to go beyond 45 degree bevel) on each side work well. Used it a bit on battery and corded and didn’t feel a difference (but I’m not cutting anything close to 200+ boards at a time either). Both cut clean and easy. Simple to change between power sources. Slide and chop where smooth. Shadow cut guide has worked as advertised. The various locks have been tight and held true. Big heavy tool and my current space limitations mean I need to bring the saw out and put back to store each time I use it so the rolling stand and battery power have been very convenient. Found youtube by The Shack breaking down the DWS780’s features and examples for measuring and adjusting calibration to be helpful. No complaints so far.
Estefania Von (verified owner) –
The miter saw feels tight and works exactly how I need it to. Comes mostly set up out of the box. I did not even need to square it up. Perfext. Thank you Dewalt!
Lessie Tromp (verified owner) –
Great stand for my saw makes my job so much easier!
Laurie Schaden (verified owner) –
Good saw overall. The only thing I would like to see a little better would be the slide lock. It’s low profile makes it tough to get a grip on, but the power and straightness of the cuts is great.
Ayla Hahn (verified owner) –
This stand is excellent. I was tired of doing all my cutting on the ground and this stand fixes that.
Barrett Tremblay (verified owner) –
Easy set up and operation love quick clamps to mount the saw.
Hyman Hyatt (verified owner) –
Saw is amazing. The cordless option is great and there is plenty of power
Gavin Carroll (verified owner) –
Really impressed with this saw. Cordless tech has made leaps and bounds. I trimmed out an entire 1000 sqft house with one 9 ah battery set on one charge. Only gripe I have is there is no constant on setting for the cut line light for low light conditions.
Rory Leannon (verified owner) –
Works great, I was a little worried about the power of the batteries but honestly I could not tell the difference between them or plugged in.
Bell Koch (verified owner) –
Assembles in a few minutes and saves you from bending down all day to use the saw. Store this vertically and it takes up zero space in a corner of your workshop. Highly recommended!
Bryana Gaylord (verified owner) –
This is a great miter saw stand for managing long pieces of trim work with a miter saw, and for Hardie plank siding with a shear. It is heavy duty with the extension arms made of steel square tube; I like that they extend and retract with minimal effort and can lock into place. The whole stand sets up a breaks down easily, and is great for mobile work locations. When I first got it, I thought the stand was too long, but have since adapted and have allocated appropriate space when storing and transporting. I recognized the length is necessay to house the extention arms.
Rita McLaughlin (verified owner) –
Easy to setup. Powerful cutting on battery or plugged in.