DEWALT 1 in. x 17 in. Power Ship Auger Bit
$23.00
The DEWALT 1 in. x 17 in. Power Ship Auger Bit features dual cutting edge to provide extreme durability. This comes in silver metallic color with assembled dimension of 18.25 in. d x 1.75 in. w x 1.75 in. h. It provides long lasting usage.
In stock
Description
DEWALT Ship Auger bits are designed for professional contractors who need to drill large, deep holes quickly and cleanly. These industrial-duty auger bits feature screw-point tips for quick starts and increased control, and extra-deep flutes for fast and furious chip removal, which helps prevent clogging and overheating.
- Self feed spur for fast material penetration
- Dual cutting edge for maximum durability in nails
- Hardened alloy steel provides superior bit life
- 7/16 in. Ball groove shank allows for quick bit changes
Additional information
| Weight | 1.536 lbs |
|---|---|
| Dimensions | 18.25 × 1.75 × 1.75 in |
| Assembled Depth (in.) | 18.25 in |
| Assembled Height (in.) | 1.75 in |
| Assembled Width (in.) | 1.75 in |
| Auger Bit Type | Long Auger Bit |
| Bit Diameter | 1 in |
| Bit Length (in.) | 6 |
| Bit Material | High Speed Steel |
| Drill Bit Type | Auger Bit |
| Drill Bit Type(s) Included | Auger Bit |
| Individual/Set | Individual |
| Material Application | Wood |
| Model | DW1687 |
| Self-Feeding | Yes |
| Shank Diameter | 7/16 |
| Shank Style | Straight |
| Tools Product Type | Power Tool |
Reviews (8)
8 reviews for DEWALT 1 in. x 17 in. Power Ship Auger Bit
Only logged in customers who have purchased this product may leave a review.
Related products
Drill Bits
Bosch 20 in. Hammer Steel 1-1/8 in. Hex Moil Point Chisel for General Chipping Work
Model# HS2161
Drill Bits
Model# 49-56-0247
Drill Bits
Model# DW2162
Drill Bits
Bosch 20 in. x 3 in. Hammer Steel 1-1/8 in. Hex Chisel for Demolition Hammer
Model# HS2164
Drill Bits
Model# 282269
Drill Bits
Model# 282303
Drill Bits
Model# 48-25-2122
Drill Bits
Model# 48-20-8856
Melany Gusikowski (verified owner) –
Worked great for drilling holes in a tree stump to prepare it for stump remover. Much better than a spade bit for this purpose.
Braulio Keeling (verified owner) –
Drill bit is made well and does the job. I use this auger bit to drill down into hard pack coquina in our Florida campsites so I can put up tiki torches. The 1 inch diameter is the perfect size to fit the bamboo pole for a tiki torch. A lot of times the ground is too hard to just stick in the torch, these make the perfect holes. It is made with extra deep flutes the quickly move the dirt from the hole and prevent clogging. The edges are also very sharp and it has a ball groove shank which makes for quick bit changes.
Rudolph Feil (verified owner) –
Used mine to power through tree stumps—no problem.
Liliane Wisoky (verified owner) –
Sharp, quick cutting, and fairly priced. This bit is very helpful when doing electrical rough-in. The 17 inch length gives you 11 inches of fluted bit, which is especially helpful when drilling through large timbers. It is quick to start and cuts aggressively. Although there is no mention about its ability to handle nail embedded wood on the website the packaging mentions “durable tip”. The competition, the Diablo bit (HD # 313022196 ) specifically mentions nail embedded wood. I did not test this claim. The 7/16” shank makes it a great companion to the new quick-lok chucks that are coming on right angle drills these days (see video below). It is priced at $27 which puts it a few bucks cheaper than the Diablo. It was a good performer on the job and I give it a B+ rating.
Palma Cassin (verified owner) –
This 1″ auger bit is impressive. The overall length is 17.25″. The spiral auger portion is 11″ long and the shank is 5.5″ long. It weighs 22 oz. The screw point tip is 3/4″ long and 1/4″ thick at the base – beefy enough that it should hold up to repeated use. The 7/16 grooved hex shank can be used in a regular 1/2″ chuck or with a quick-release chuck. The clear plastic slip case has multiple click notches to adjust the length for a secure fit to protect this bit.It drilled a clean 1″ hole while ejecting a pile of 1/4″ chips.I don’t recommend this but I accidentally dropped it tip down on a concrete floor and the pointed screw tip was still fine.There’s no mention of what RPM to use this bit at but my chart says suggests 525 RPM. The drill is made in Brazil.
Stefanie Hahn (verified owner) –
This 1 inch by 17 inch auger bit is really made well, and will keep powering through studs to make a clean 1 inch hole for years to come! I was impressed by the extra deep flutes in the bit barrel which will allow the wood to clear the bit quickly. The tip is well-formed and the screw threads are perfect for quickly starting a hole. I keep this bit in the provided clear sliding case so I can find it easily. This is a really high quality bit, and I highly recommend it!
Leta Mayer (verified owner) –
Drilled down into a wet oak stump with ease.
Richie Reilly (verified owner) –
This ship auger is better quality than its price suggests. I know they are not cheap but this bit cuts clean, doesn’t slow down on nails, and maintains an edge for quite a long time. I didn’t think it would perform as good as my Diablo’s but so far it has. More time is needed.I cringe when I see people complain about ship augers. Most were not used properly. Especially bits larger than 1/2″, the speed needs to be kept slow – no more than 600RPMs. Hardwoods need even slower speeds. Take care of these expensive bits and they will provide long service.My only grip is the case is not have a lid I can remove and attach like Diablo’s ship auger bitsIrwin seems to have slipped on quality, these DeWalt’s are as good if not better than the older ones.