DEWALT FLEXVOLT 6-1/4 in. Carbide Wood Hole Saw
$59.97
High efficiency, this DEWALT FLEXVOLT Carbide Wood Hole Saw will cut wood, metal, stainless steel, spring steel, aluminum and copper.
In stock
Description
DEWALT FLEXVOLT High Efficiency Accessories are engineered to maximize runtime. The hole saws feature a self-feed pilot bit for fast, efficient cutting, carbide teeth for long life, and a thin Kerf design for high efficiency. For use in cordless and corded tools.
- Engineered to maximize runtime
- Self-feed pilot bit for fast, efficient cutting
- Carbide teeth for long life
- Thin Kerf design for high efficiency
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
Additional information
| Weight | 2.62 lbs |
|---|---|
| Dimensions | 7.38 × 2.65 × 8.25 in |
| Arbor Size | 0.25 |
| Arbor included | No |
| Bit Diameter | 3/8 in |
| Bit Length (in.) | 0 |
| Bit Material | Carbide |
| Drill Bit Type | Hole Saw |
| Drill Bit Type(s) Included | Hole Saw |
| Drilling Depth (in) | 0 |
| Hole Saw Diameter (in) | 6-1/4" |
| Individual/Set | Individual |
| Material Cut | Wood |
| Min Chuck Size Required | 1/4 In. |
| Model | DWAFV0614 |
| Pilot Bit Included | No |
| Teeth Per Inch | 0 |
| Tools Product Type | Power Tool |
Reviews (19)
19 reviews for DEWALT FLEXVOLT 6-1/4 in. Carbide Wood Hole Saw
Only logged in customers who have purchased this product may leave a review.
Related products
Drill Bits
Bosch 20 in. Hammer Steel 1-1/8 in. Hex Moil Point Chisel for General Chipping Work
Model# HS2161
Drill Bits
Model# 48-25-2122
Drill Bits
Model# 49-56-0247
Drill Bits
Bosch 20 in. x 3 in. Hammer Steel 1-1/8 in. Hex Chisel for Demolition Hammer
Model# HS2164
Drill Bits
Bosch Carbide-Tipped Rotary SDS-Plus Hammer Bit Set (7-Piece)
Model# HCK001
Drill Bits
Model# 282303
Drill Bits
Model# 48-32-2100
Drill Bits
Model# DW2535
Jacinto Schulist (verified owner) –
Good
Guillermo Farrell (verified owner) –
The bit worked well for the installation of 6″ LED low-profile puck lights in a 3/4″ pine ceiling backed by 5/8″ drywall. Clean cuts and the bit held up well despite hitting a couple nails. Used a 1/2″ drill with handle (important) to drill the holes. Quick work of the holes and was worth the $.
Joanie Anderson (verified owner) –
A little difficult to work with. Three Cutting edges tends to stick. Might be better to go with a traditional saw tooth type blade.
Leo Mills (verified owner) –
A little heavy for doing recessed lighting holes. It works.
Tiana Gutmann (verified owner) –
Cuts big holes easily thru 2by lumber and subflooring. Need a big drill with the second right angle handle in order to control.
Dolly Bradtke (verified owner) –
Easy to use and the drill bit is adjustable.
Kristopher Blick (verified owner) –
Does a good job, but be sure you score around the bit with a utility knife before cutting to minimize tear out. Cut slowly and use a 1/2 in drill with an auxiliary handle as this bit develops a LOT of torque.
Kailey Beatty (verified owner) –
Product is very robust and built for heavy duty use.
Joany Hills (verified owner) –
Does the job!
Idell Heathcote (verified owner) –
Great bit. Had alot of holes to put thru plaster. Worked perfectly. And held up
Kennith Cremin (verified owner) –
I needed a hole saw to cut a hole in the lens board of a 1860s wooden tintype camera. The extremely hard African mahogany can fray but the sharp precision blade made short work of it. The installation of the vintage 1860s lens completed my camera. I have a complete set of hole saws.
Marshall Kuhic (verified owner) –
I’m really pleased with this wood hole saw, it was just what I needed to complete my set also!
Genevieve McClure (verified owner) –
Built well heavy cut six holes for LED lights in Plaster ceiling. Got it on time!
Yvonne Grimes (verified owner) –
I have used many holesaws over the years. They have all mostly had regular saw teeth. The Dewalt with just four carbide teeth is the best I’ve ever used for wood.
Laury Labadie (verified owner) –
Rips right through wood and nails without skipping a beat. Bit does not dull when u hit a nail like regular hole saw bits well worth the money. Going to buy more sizes
Carleton Conn (verified owner) –
Product is very robust and built for heavy duty use.
Zoe Schmidt (verified owner) –
The Dewalt Hole Saw worked wonderfully. This was a hard to find size, but The Home Depot came through for us by ordering it on line.
Enrique Lebsack (verified owner) –
Cuts a 6 1/4″ hole like butter.
Marilyne Konopelski (verified owner) –
Works great.