DEWALT 10.1 in. Straight-Cut Aviation Snip
$15.44
Provide comfortable and reliable sheet metal cutting and trimming with the selection of this DEWALT Straight-Cut Aviation Snip. Features flush mount hardware.
In stock
Description
The DEWALT Ergo Aviation snip was designed with a reduced handle span, providing lower level of muscle effort required while cutting tough materials. This tool is traditionally used for cutting aluminum, vinyl siding, screening, cardboard, leather, copper and 18-Gauge to 22-Gauge sheet metal. The snip’s serrated cutting edge prevent materials from slipping during use and the slip-resistant, bi-material cushion grip ensures a firm, comfortable grip.
- 15% less muscle exertion, easier cutting
- More cuts, less effort
- Serrated blade, clean finish
- US ergonomic performance certification
- Improved external latch design
- Flush mount hardware
- Forged chrome vanadium steel
Additional information
| Weight | 1.007 lbs |
|---|---|
| Dimensions | 1.05 × 2.87 × 11.55 in |
| Blade Length (in.) | 2.75 |
| Blade Material | Steel |
| Blade Width (in.) | 2.9 |
| Features | No Additional Features |
| Hand Tool Type | Snips/Sidecutters |
| Handle Length (in.) | 5.85 |
| Handle Material | Composite |
| Individual/Set | Individual |
| Model | DWHT14675 |
| Number of Pieces | 1 |
| Product Length (in.) | 11.9 |
| Rolled Steel Gauge Cutting Capacity | 18 |
| Snip Type | Aviation Snip |
| Tools Product Type | Hand Tool |
Reviews (71)
71 reviews for DEWALT 10.1 in. Straight-Cut Aviation Snip
Only logged in customers who have purchased this product may leave a review.
Related products
Cutting Tools
Model# 63324
Cutting Tools
Model# 2100-8
Cutting Tools
Model# 21007
Cutting Tools
Model# 21-295
Cutting Tools
Model# 4212
Cutting Tools
Model# 20-331
Cutting Tools
Model# 0190MC
Cutting Tools
Model# M5RL
Gerry McCullough (verified owner) –
Excellent product cuts exceptionally well
Sarai Williamson (verified owner) –
Work as advertised
Keshawn Greenfelder (verified owner) –
These tin snips cut well. I have tried them on different gauges of aluminum and had great results. I compared the cuts I got to those made with a well known brand of snips and was pleasantly surprised. These snips cut a straighter line and cut the full width of the metal with no problems. This produced clean cuts without any sharp edges make my work easier.
Ernesto Nicolas (verified owner) –
Love the way these cut. Much better than other straight cuts I have used.
Abraham Rodriguez (verified owner) –
After decades of being an avid DIY’er, my scissors style aviation snips pretty much gave up the ghost – most annoyingly, they were difficult to keep adjusted for cutting and the cuts were not always clean. As long-time user of DeWalt products, I decided to give these a try when the need arose I am impressed! They have a nice ergonomically designed handle and a serrated cutting edge; combined, they provide nearly effortless, clean cuts; advertised for 18 gauge (1/20″) metal.There is also a thumb operated lock to keep the blades closed. Straight and Right-Hand cut versions are also available, all with color coded handles – red/left, yellow/straight, and green/right. The forged chrome vanadium steel cutting edges should last for a long time; the snips carry a limited lifetime warranty.I would recommend this product.
Sydni Fritsch (verified owner) –
I’ve used DeWalt power tools, corded & cordless, for years and have never been disappointed with the performance or longevity. It was time to try some of their hand tools; the Aviation Snips are high quality, have excellent cutting performance, and feel excellent from a weight & balance perspective. The cutting edges are serrated to provide a good bite on the material being cut, the handle length provides good leverage to reduce the effort needed to cut, and the handles are color coded for the application, yellow for straight, red for left, green for right. The manufacturer offers a lifetime warranty.I would recommend this product.
Torrey Bartell (verified owner) –
I got the set of 3. Left right and center cut. They cut great, but was surprised one of the 3 came with several rust spots. No worries some wd40 and a brush. Strong cut, nice grip. Worthy buy.
Julian Walker (verified owner) –
I have used it only once to cut iron and it was very good.
Leo Kuhlman (verified owner) –
If you do any amount of sheetmetal work a good set of shears are a must, even if you are just doing a small flashing job, these are a very good set. These right hand shears have a very good mechanical advantage that makes cutting easier than a conventional set of shears. I have used these on the 20 gauge sheetmetal I use to do patch panels on my street rod project and they went through it like butter. I highly recommend these shears and I also highly recommend you purchase a right and left hand set if you do a lot of sheetmetal work like me. It seems redundant but if you cut irregular shapes with inside and outside curves the right and lefts are a must and the price is very reasonable.
Vanessa Torphy (verified owner) –
Cuts smoothly
Aidan Runolfsdottir (verified owner) –
The aviation snip is great.
Joannie Schimmel (verified owner) –
Easy to use and performed as listed.
Vivien Buckridge (verified owner) –
Great deal for the money
Tremayne Dibbert (verified owner) –
This is good
Meggie Bechtelar (verified owner) –
Cuts straight and true.
Emely Torphy (verified owner) –
Great deal for the money
Dane Renner (verified owner) –
Super sharp and accurate!!
Nathanial Kutch (verified owner) –
Very sharp and comfortable well made
Deshawn Konopelski (verified owner) –
If you do any amount of sheetmetal work a good set of shears are a must, even if you are just doing a small flashing job, these are a very good set. These left hand shears have a very good mechanical advantage that makes cutting easier than a conventional set of shears. I have used these on the 20 gauge sheetmetal I use to do patch panels on my street rod project and they went through it like butter. I highly recommend these shears and I also highly recommend you purchase a right and left hand set if you do a lot of sheetmetal work like me. It seems redundant but if you cut irregular shapes with inside and outside curves the right and lefts are a must and the price is very reasonable.
Dale Gerhold (verified owner) –
Made light work of snipping a custom-ordered sheet down to the correct size.