DEWALT 24 in. 1500 lb. Parallel Bar Clamp w/3.75 in. Throat Depth
$34.97
Complete all your work projects at ease and efficiently with the addition of this DEWALT two-Parallel Bar Clamp w Throat Depth.
In stock
Description
The DEWALT 24 in. Parallel Bar Clamp is built tough with the ability to clamp up to 1500 lbs. of force. It’s 3-3/4 in. D throat is a great choice for a cabinet making and a variety of clamping projects. The parallel design provides consistent support and even pressure for flush surfaces.
- 1500 lbs. clamping force
- 3-3/4 in. throat depth
- Parallel design provides consistent support and even pressure for flush surfaces
- Smooth jaw won’t damage building materials
- 24 in. L
- Ergonomic handle
- Limited lifetime warranty
Additional information
| Weight | 8.29 lbs |
|---|---|
| Dimensions | 31.30 × 6.00 × 2.00 in |
| Clamp Type | Parallel |
| Clamping Strength (lb.) | 1500 |
| Duty Rating | Heavy |
| Hand Tool Type | Clamp |
| Individual/Set | Individual |
| Jaw Width | 3.75 |
| Material | Multi-Surface |
| Maximum Opening (in.) | 24 |
| Model | DWHT83831 |
| Throat Depth | 3.75 |
| Tools Product Type | Hand Tool |
Reviews (26)
26 reviews for DEWALT 24 in. 1500 lb. Parallel Bar Clamp w/3.75 in. Throat Depth
Only logged in customers who have purchased this product may leave a review.
Related products
Fastening Tools
Model# DWHTMR77C
Fastening Tools
Model# 225
Fastening Tools
Model# HT50P
Fastening Tools
Model# TRE550Z
Fastening Tools
Model# 66987
Fastening Tools
Model# 38-604
Fastening Tools
Model# DWHTHT450
Fastening Tools
Model# 480
Darian O’Connell (verified owner) –
I had a chance to compare these to some Irwin parallel clamps that I already had in my collection. These are pretty much identical other than the color and the handle. I like the ones that I already have with very few exceptions. The biggest complaint would be that if you tighten the clamp down far enough it will leave little knicks in the bar. I have not had any issues with this causing my panels to be not flat or leaving scratches on my project, but I guess it is possible. If any of those knicks were big enough, I would just knock it down with a file and it would be gone in about two strokes. I do really like these clamps, and for they price I think they are some of the better that you can get. Now there are other “high end” products that do the same thing but maybe have some more features, but the clamping force you can put behind these and the cost make them a clear choice for me. I can buy two of these for the price of one of the high end brands. Dewalt is known for making some quality products, and I think these stay true to the name. I will likely pick up some of the 48″ as well when they are in stock at my local store.
Dina Walker (verified owner) –
Good clamps. Seem to work ok. I don’t know about long term yet. That will affect the # of stars.
Rahsaan Jakubowski (verified owner) –
Excellent clamp, great price.
Cleo Kilback (verified owner) –
Works as it should good stability and clamp pressure
Zula Emard (verified owner) –
Pleased with them so far. They are just as good as Bessey clamps and cost a few dollars less.
Ezekiel DuBuque (verified owner) –
Nice clamps reasonably priced. Great gripping power and these dont have the serrated bars which makes them much easier to use.
Shanelle Dare (verified owner) –
This clamp is awesome. So strong and doesn’t bend when tightened.
Vince McLaughlin (verified owner) –
Works as expected will by 2 more
Emely Kiehn (verified owner) –
Good functionality and clamping pressure but the locking mechanism can be a little difficult for one handed operating for everyone. I’d buy more.
Laney Zemlak (verified owner) –
These are great well built parallel bar clamps with a rubber handle allowing ease on tightening. Would recommend these clamp for the quality and performance. Would buy again if needed more.
Thad Bartell (verified owner) –
This is an excellent 24 inch parallel bar clamp that is a pleasure to use. The clamp has a 3 3/4 throat and has rocking action to adjust the length and then push forward to hold the piece and then twist to apply pressure. This is when this clamp really shines because of the parallel heads it applies up to 1500 pounds of pressure equally to the full throat of the clamp. No raising or bowing of your pieces as you apply pressure, the work pieces stay perfectly flat. This is a great quality of a parallel bar clamp. It does make the heads a little heavier and bulky but the end results are worth the extra weight. This is an excellent clamp.
Flavie Hoppe (verified owner) –
I am supplementing a size I don’t have yet with my Bessey clamps so that is natuarally my my comparison after owning the Bessey’s for a few years now. After some use I have to say the DeWalt version is pretty good. I actually like the shaft even better than the Bessey if I’m honest. No little ridges means less glue drips will stick and head movements along the rail is super smooth. When tightening the cam also seems to lock a easier which is my biggest complaint with a Bessey. The only knock is the Dewalt clamp has no hard rubber clamping surface that is also removable. Rather it’s a hard plastic which will dent/mushroom if it gets dinged (say it falls of your bench) Other than sanding it smooth again you can’t really replace it if it becomes damaged. They say you can never have too many clamps and I would be happy to keep filling out my collection with a few more of these.
Angeline Fay (verified owner) –
This DeWalt 24 in. Parallel Bar Clamp exceeds the previous parallel clamps I’ve used for the past 20 years in strength, versatility and value. I find they are also easier to adjust, have a wider range of clamping clearances, clamp surfaces are more durable and offer a larger application of force area.The quick release bar tabs allow for easy clamp assembly reversals to give an equal and evenly distributed separation or outward clamping force. In all, I find it to be a well designed and powerfully implemented joinery tool for the woodworker!
Desmond Lind (verified owner) –
Excellent clamping pressure and stability
Camilla Pfannerstill (verified owner) –
Excellent clamp. The smooth track makes sliding easy and easy to clean up.
Darryl Bogan (verified owner) –
Bar clamps work well. Easy to adjust and tighten.Very well built.
Tamara Parisian (verified owner) –
Excellent clamp. The smooth track makes sliding easy and easy to clean up.
Lucile Becker (verified owner) –
Just like Bessey’s. But much cheaped.
Ryley Ernser (verified owner) –
This has the capacity to clamp with best of em and for a lower price,
Aiden Harris (verified owner) –
Nice easy to use