DEWALT Heavy-Duty Hammer Tacker
$37.92
The DEWALT Heavy-Duty Hammer Tacker is a versatile stapler that accommodates Arrow T50 and Stanley 700 series HD staples in a variety of sizes. This highly portable stapler features a surface guard that helps prevent underlayment tearing and wind damage. Its magazine is durably constructed from steel to help ensure positive feeding. This stapler conveniently loads from the bottom for easier access.
Only 10 left in stock
Description
The DEWALT Heavy-Duty Hammer Tacker is a versatile stapler that accommodates Arrow T50 and Stanley 700 series HD staples in a variety of sizes. This highly portable stapler features a surface guard that helps prevent underlayment tearing and wind damage. Its magazine is durably constructed from steel to help ensure positive feeding. This stapler conveniently loads from the bottom for easier access.
- Manual stapler for easy portability
- For use with DEWALT heavy-duty staples with a 27/64 in. crown width and 5/16 in., 3/8 in. or 1/2 in. leg length
- Also drives Stanley HD staples 700 series 5/16 – 1/2 in. and arrow T50 HD staples 5/16 in. – 1/2 in.
- Surface guard helps prevent tearing underlayment and further damage from wind
- All-steel magazine construction provides a smooth, durable sliding surface for staples
- Convenient bottom loading allows quick and easy staple reloads
- All steel magazine construction provides smooth, durable sliding surface for staples
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
Additional information
| Weight | 2.414 lbs |
|---|---|
| Dimensions | 17.50 × 5.50 × 1.50 in |
| Assembled Depth (in.) | 17.5 in |
| Assembled Height (in.) | 1.4 in |
| Assembled Width (in.) | 5.25 in |
| Hand Tool Type | Stapler |
| Handle Length (in.) | 10.5 |
| Maximum staple size (in.) | .5 |
| Model | DWHTHT450 |
| Staple type | T50 |
| Tools Product Type | Hand Tool |
Reviews (81)
81 reviews for DEWALT Heavy-Duty Hammer Tacker
Only logged in customers who have purchased this product may leave a review.
Related products
Fastening Tools
Arrow T50 3/8 in. Leg x 3/8 in. Crown Galvanized Steel Staples (5,000-Pack)
Model# 506IP
Fastening Tools
Model# MR33C
Fastening Tools
Wilton 6 in. Mechanics Vise with Swivel Base, 4-2/16 in. Throat Depth
Model# 21500
Fastening Tools
General Tools Brass Grommet Fastening Kit with Case, Includes (6) 1/2 in. and (6) 3/8 in. Grommets
Model# 81264
Fastening Tools
Model# 63302
Fastening Tools
Model# 66987
Fastening Tools
Model# T50
Fastening Tools
Yost 6 in. High Visibility All Steel Utility Workshop Bench Vise
Model# 906-HV
Douglas Schumm (verified owner) –
Insulated a 26 X 30 garage,worked good,did not jam 1 time. Only thing is if you bump the end of the handle,it will open up and the staples will fall out.
Colten Roberts (verified owner) –
Works as expected. Great tool.
Vincenzo Lakin (verified owner) –
Bought to do our roof. Work great. No jams, light weight and easy to use
Forest Senger (verified owner) –
DeWalt hammer stapler worked perfectly.Easy to load, easy to hold .
Pat Okuneva (verified owner) –
great tool..very pleased ..only thing that could improve is the button on end of handle where you reload staples..touch it and comes open..i use small piece duct tape over it and had no problems..if could make more flush into handle would make a great improvement ..
Meda Rau (verified owner) –
i purchased this a few months ago and it works very well. i have issues with it when I add staples, I have a hard time closing it. The stapler bar wont stay in. I finally got it to stay put.
Joanie Howe (verified owner) –
Needed to tack down carpet padding and this worked like a champ made the job quick and easy
Vincenzo Crist (verified owner) –
THE STRAIGHT HANDLE DESIGN DOES NOT ALLOW FOR A LEVEL BLOW WITH THE STAPLER.THE ANGLE YOU NEED TO HOLD IT AT TO KEEP FROM BEATING UP YOUR FINGERS WHILE HAMMERING RESULTS IN VARIABLE STAPLE DEPLOYMENT.
Alvis Flatley (verified owner) –
Works great at a goid price
Randal Bednar (verified owner) –
Product is light weight but heavy duty. Hammer tacker has a solid handle which is comfortable and does not slip. Product has been working well without jamming during a large project of extended use. Meets my expectations for commercial use.
Vita Pfannerstill (verified owner) –
Pro: Does what it’s made for excellent Con: Just like some others , the amount of staples it can hold is a draw back.
Laila Beer (verified owner) –
I have a lot of Dewalt tools and the quality is very good.. One great feature that the staples loads from the bottom so easier to put the staples in. I used a few times and it work very well. The stapler It drives Stanley HD staples 700 series 5/16 – 1/2 in. and Arrow T50 HD staples 5/16 – 1/2 in. So it .uses most brands of staples. It comes with a Lifetime Warranty.
Rebeka Bahringer (verified owner) –
easy loading and this product doesn”t jamb it is the best slap staple I ever used
Elaina Veum (verified owner) –
Very simple to load and holds 2 full racks of staples. Excellent quality as are most DeWalt tools.
Elmo Donnelly (verified owner) –
My classroom has some very high space over the windows which can be used as bulletin boards. Unfortunately, I am short and would feel unsafe using a regular stapler . But this stapler allowed me to safely reach much higher than I could otherwise and I can have the bulletin boards I desire.
Stephan Bashirian (verified owner) –
Works very well have had it since August of last year and hasnt broken yet you hit the bottom on any thing and it flings open and it’s very heavy but I do roofing for a living it gets used heavily and daily I’ve even pounded a few 16s in with it on Jack jobs and it’s still going
Emmie Nienow (verified owner) –
Great tool
Dax Graham (verified owner) –
Light weight easy to use. I recently picked up another one.
Garrison Lowe (verified owner) –
Have used various staplers, you have to hit a lot harder than other staplers. This leads to torn paper. Also more difficult to hit square than other staplers.
Aliyah Green (verified owner) –
I like the feel of the weight to put a staple into wood. I use it to staple fiberglass insulation in place. I would have liked it better if there were finger ridges on the handle. I think the product is made strong. It also has a life time warranty. That makes me feel better about any product. DeWalt makes good products that I also feel reliable. The hammer type stapler is better then the squeeze stapler.