The DW715 12 in. Single-Bevel Compound Miter Saw is powered by a 15 Amp motor to drive 4,000 RPM, delivering extended power and durability. Features stainless steel miter detent plate and cam miter lock that provide repeatable accuracy and durability with easy adjustments. Tall sliding fences support 5-1/2 in. of base molding vertically and 5-1/2 in. of crown molding vertically nested. Lightweight design and built-in carry handle for portability. The DEWALT 12 in. Circular Saw Blade Assortment DW3128P5 has blades that were made of super-hard tungsten carbide for durability. A thin kerf offers ultra-sharp edges and smooth cuts. The blades have computer-balanced plates to decrease vibration, as well as anti-stick rims for improved accuracy and a better finish. Use these blades with miter and table saws, they work great on wood, chip board and plywood.
- Tall sliding fence supports 5-1/2 in. base vertically
- Bevels 0 to 48 to the left and 0 to 3 to the right
- 2 in. x 8 in. dimensional lumber cross cut capacity at 90° and 2 in. x 6 in. dimensional lumber at 45
- 15 Amp
- 4000 RPM
- 5/8 or 1 in. arbor
- DW3128P5 Can be used with miter and table saws
- DW3128P5 Made of construction-grade tungsten carbide
- DW3128P5 Thin kerf and anti-stick rim for smooth, accurate cuts
- DW3128P5 Computer-balanced plate reduces vibration
- DW3128P5 Includes one 80-tooth blade and one 32-tooth blade
- DW3128P5 Ideal for wood, chip board on plywood
Danny Powlowski (verified owner) –
Really like this saw, it exceeded my expectations!
Francisca Koelpin (verified owner) –
Easy to use and well built
Alysson McCullough (verified owner) –
Great product my husband loves it
Britney Kassulke (verified owner) –
Have only used the saw to make a dozen or so cuts but it is impressive – easy to control and cuts quickly and precisely. Very nice so far!
Muhammad Spencer (verified owner) –
Does what I expected it to do. Love it!
Karli Rogahn (verified owner) –
Good to go right out of the box. Have only had it a short time but so far all is good.
Felicity Beatty (verified owner) –
This replaced my Delta sawIt is like night and day- it is tight and the blade is too!
Belle Rice (verified owner) –
great price and product
Georgiana Bode (verified owner) –
It does what it’s supposed to. Cuts, bevels and such. The 4 stars given because the dust collector is basically non-existent. The bag is literally hanging there for decorative purposes. For the price you’d figure it pick up SOME dust.
Aida Crona (verified owner) –
Extremely happy with this purchase. It was easy to setup and adjust. I added a laser and a better blade for a fantastic setup for everything from framing to trim. The locking stops are solid and the blade brakes quickly when you release the trigger. For the money, this is a perfect miter saw.
Maxime Heaney (verified owner) –
Nice saw for home projects.
Remington Frami (verified owner) –
Bought this miter saw to replace my cedar fence. It performed like a champ! I needed to make many angle cuts due to the slope of my backyard and this saw could do them all. I was able to cross cut a jumbo fence post, 4-1/8×4-1/8 inches actual size in one shot (you just have to move it up about a quarter inch). I look forward to using for future projects. It’s my favorite tool right now.
Robyn Strosin (verified owner) –
I like the saw as is powerful, good blade and enough controls for its price. Also the brand name shows in its quality.
Jayde Luettgen (verified owner) –
this was a gift and the recipient loved it.
Woodrow Nitzsche (verified owner) –
It’s an excellent saw.No problems at all. I love it.
Albert Bernhard (verified owner) –
Over all I am mostly satisfied with the saw. However there area few things that I am dissapointed in Dewalt for changing from the saw I purchased about 15 years ago of the same model. This new saw has a smaller base, smaller table and no board support wings. All better features that resulted in the old saw weighing about 12lbs more and being more stable on the bench. I also don’t understand the safety switch on the trigger. Completely unnecessary as the trigger location alone is a very good safety feature without an annoying little additional safety switch. I would be happier if Dewalt had maintained the old style construction and charged more for the saw instead of making a cheaper version of the saw at the same price as the old one. I have been a diehard Dewalt user for the past 20 years and own more that 15 different tools by Dewalt. But I will look for alternatives if the cheaper construction continues in other tools they manufacture.
Nathaniel O’Kon (verified owner) –
Fantastic saw. Upgraded from a Harbor Freight special. No complaints and does its job.
Tierra Pfannerstill (verified owner) –
Excellent miter saw, I checked the angle settings with my angle gages and this saw is right on the mark, it made my base board and door frame replacement project a breeze, money well spent.
Maritza Hermann (verified owner) –
I am impressed with this saw. It worked as advertised and I expect to get years of great work out of it. It is quieter than I expected, and the quality of the materials of which it is built is top notch. I changed the blade to a higher tooth count before I ever made a cut, and the included tool made that process very easy. I love it.
Glen Kunze (verified owner) –
Great saw for my trim work. The only brand i like to work with.