DIABLO 7-1/4 in. x 48-TPI Cermet Steel Demon Ferrous Metal Cutting Saw Blade
$31.46
Complete your metal cutting work easily and quickly with the help of this excellent Diablo 48-TPI Cermet Steel Demon Ferrous Metal Cutting Saw Blade.
In stock
Description
DIABLOs new Steel Demon Cermet saw blade series is redefining metal cutting and the jobsite, by introducing safer, exclusive innovation that allows users to cut both mild and stainless steels for up to 40X longer life versus standard carbide-tipped metal cutting saw blades. The specially formulated Cermet (Ceramic and Metallic blend) teeth provide high heat tolerances and increased hardness for superior wear and ultimate cutting life. Featuring a special Triple Chip Grind and Perma-Shield coating, these blades slice through the toughest of metals to produce precise cuts and burr-free finishes that require no rework. The thin-kerf body and advanced laser cut anti-vibration stabilizer vents reduce vibration and noise to allow the blades to quickly shear through metal with ease and accuracy. The ability to cut through both mild and stainless steel eliminates the need for individually dedicated saw blades, offering a 1-blade solution for ultimate metal cutting performance and unmatched value story, forever changing the metal cutting industry.
- Cermet (ceramic and metallic blend) teeth provide a high heat tolerance and increased hardness for superior wear and ultimate cutting life, lasting up to 40X longer than standard carbide metal cutting saw blades
- Triple chip tooth design provides burr-free finishes that require no-rework and longer cutting life
- Advanced laser cut stabilizer vents trap noise and vibration for maximum stability, keeping the blade cool for straight, accurate cuts in metal cutting applications
- Tri-metal shock resistant brazing, a 3-metal brazing system, allows cermet teeth to withstand extreme impact for maximum durability
- Laser cut thin kerf design provides less resistance and heat build-up for ease of cut, accuracy and long cutting life in metal cutting applications
- Perma-Shield non-stick coating resists heat build-up by protecting the blade against gumming and corrosion
- Laser cut arbor reduces vibration and premature wear for accurate blade rotation when in use on the saw
- Cuts 1/16 in. to 1/4 in. wall thickness in steel studs, angle iron, flat bar, channel, EMT conduit
- Cuts 1/16 in. to 1/4 in. wall thickness in plate and bar stock
- Cuts 1/4 in. to 1 in. Dia threaded rod
Additional information
| Weight | .72 lbs |
|---|---|
| Dimensions | 0.35 × 7.40 × 8.20 in |
| Arbor Size | 5/8 |
| Color Family | Red |
| Material Cut | Metal |
| Model | D0748CFR |
| Number in Package | 1 |
| Number of Teeth | 48 |
| Power Tool Accessory Type | Circular Saw Blade |
| Saw Blade Diameter (in) | 7-1/4 |
| Saw Blade Material | Carbide |
| Tools Product Type | Power Tool |
Reviews (79)
79 reviews for DIABLO 7-1/4 in. x 48-TPI Cermet Steel Demon Ferrous Metal Cutting Saw Blade
Only logged in customers who have purchased this product may leave a review.
Related products
Saw Blades
Milwaukee 12 in. 5 Teeth per in. Wood Cutting SAWZALL Reciprocating Saw Blades (5 Pack)
Model# 48-00-5037
Saw Blades
Model# DW3106
Saw Blades
Model# D1280X
Saw Blades
Milwaukee 6 in. 14 Teeth per in. Medium Metal Cutting SAWZALL Reciprocating Saw Blades (5 Pack)
Model# 48-00-5182
Saw Blades
Milwaukee 12 in. 5 TPI Pruning SAWZALL Reciprocating Saw Blades (5-Pack)
Model# 48-00-1303
Saw Blades
Milwaukee 8 in. 8/12 Teeth per in. Mutli-Material Cutting SAWZALL Reciprocating Saw Blades (5 Pack)
Model# 48-00-5093
Saw Blades
Milwaukee 6 in. 24 Teeth per in. Thin Metal Cutting SAWZALL Reciprocating Saw Blades (5 Pack)
Model# 48-00-5186
Saw Blades
Milwaukee 9 in. 14 Teeth per in. Medium Metal Cutting SAWZALL Reciprocating Saw Blades (5 Pack)
Model# 48-00-5187
Rene Considine (verified owner) –
Needed to saw 2 chain link fence posts, wasn’t sure I had the right tools (hacksaw, no thanks). Diablo circular saw blade cut through like butter, 2 minute job!
Edward Effertz (verified owner) –
good with multiple small bites Vs one deep cut
Katrina Williamson (verified owner) –
This blade works great . Why buy a metal saw when this blade is a killer?
Deborah Larkin (verified owner) –
Blade is excellent, used it for cutting expanded metal.
Cortney Mosciski (verified owner) –
Used blade on circular saw to trim 44 metal balusters for stairs. Went right through with no problems and was very durable. Wasn’t dull afterwards
Franco Legros (verified owner) –
I was pleasantly surprised when this blade chewed its way through commercial grade metal doors like wood. Of course chips were flying everywhere but it kicked butt.
Alberto Dare (verified owner) –
Better than I hoped for.
Lincoln Franecki (verified owner) –
Cut easily through corrugated metal roofing panels.
Shaina Upton (verified owner) –
Bought this to replace a more expensive blade. Had no idea that it would cut so well. It ripped through 1/4” steel plate in no time! Added bonus it did it queter than the more expensive one
Pasquale Rath (verified owner) –
Does exactly what it’s supposed to do. Blade is thicker and more heavy duty than wood working blades, little to no sparks, does not heat up steel, worth every penny.
Abigail Feil (verified owner) –
I had tried to cut some square conduit with a hacksaw (new blade) and it barely dented the conduit after a couple of minutes. The Diablo blade cut through it like butter…with very few sparks and smooth edges that did not burn my hand. Great job!!! Thanks
Emely Macejkovic (verified owner) –
works very well cutting hurricane shutters(aluminum)
Javier Lueilwitz (verified owner) –
At first I was cutting out sections of corrugated tin roofing for a project using a 4 1/2″ grinder, got frustrated and ordered the “steel demon” blade for my skilsaw. Waited till it arrived, continued with the project, and I was impressed: This blade cut through the tin like butter; the cuts were clean, fast and effortless compared to the grinder cuts. Because of the toothed (?) design, the tin had to be supported to prevent rattling. Have not tried it on thicker metals, but for cutting corrugated steel roofing, this blade gets 5 stars all day long.
Jettie Paucek (verified owner) –
Worked great at cutting metal with ease.
Quincy Blanda (verified owner) –
Better than I expected. Worked perfectly, would highly recommend…
Talia Hyatt (verified owner) –
Exceeded all expectations!!Very clean cuts, no vibrations. I have also purchased in the past sawzall blades with extreme satisfaction.GREAT COMPANY. I am not in their payroll.
Dejah Vandervort (verified owner) –
Cut several sections of 2 inch X 3/16 wall steel tubing for welding practice. Cool to the touch immediately after cutting! Smooth cuts. Very highly recommended. Tom F.
Lila Funk (verified owner) –
Cut 11gauge steel great
Manley Reichert (verified owner) –
Fantastic blade.
Kiel Goldner (verified owner) –
This is a great blade to have for all of your metal cutting. I’ve used it for metal sheeting and 1/2 plate.