DIABLO 10 in. x 80-Teeth Non-Ferrous / Plastic Cutting Saw Blade
$55.21
Diablo’s next generation 10 in. x 80 Tooth Non-Ferrous/Plastics Carbide Circular Saw Blade features new laser-cut stabilizer vents for precise and clean cuts in non-ferrous metals and plastic materials. The advanced stabilizer vents feature a permanent filler baked in from top to bottom for absorbing noise and preventing sideways movement, allowing the blade to slice through materials cleanly, quickly and accurately. Constructed with TiCo Hi-Density special-blend carbide, Diablo’s 10 in. non-ferrous metals/plastics blade produces precise cuts and provides 5X longer cutting life. The laser cut heat expansion slots allow the blade to expand and contract during use, keeping the cut true and straight. This blade is excellent for cutting plastics, brass, aluminum, copper and fiberglass.
In stock
Description
Diablo’s next generation 10 in. x 80 Tooth Non-Ferrous/Plastics Carbide Circular Saw Blade features new laser-cut stabilizer vents for precise and clean cuts in non-ferrous metals and plastic materials. The advanced stabilizer vents feature a permanent filler baked in from top to bottom for absorbing noise and preventing sideways movement, allowing the blade to slice through materials cleanly, quickly and accurately. Constructed with TiCo Hi-Density special-blend carbide, Diablo’s 10 in. non-ferrous metals/plastics blade produces precise cuts and provides 5X longer cutting life. The laser cut heat expansion slots allow the blade to expand and contract during use, keeping the cut true and straight. This blade is excellent for cutting plastics, brass, aluminum, copper and fiberglass.
- TiCo high-density carbide for increased performance and maximum cutting life
- Perma-SHIELD non-stick coating for protection against heat, gumming and corrosion
- Super-thin kerf design for fast and effortless cuts
- New advanced laser-cut stabilizer vents absord noise and vibration, and prevent sideways movement for precise, clean cuts
- Tri-Metal Shock Resistant Brazing to withstand extreme impact
- Precision tensioning is a computer controlled process to keep the blade flat for a better quality finish
- Laser cut heat expansion slots allow the blade to expand and contract without warping for straight and accurate cuts
- Great for cutting non-ferrous metals, plastics, melamine and wood
- Blade can be used on 10 in. miter saws, 10 in. slide miter saws and table saws (portable and stationary)
- Red saw blades are a trademark of Freud America, Inc.
- Covered by a limited lifetime manufacturer warranty
Additional information
| Weight | 1.80 lbs |
|---|---|
| Dimensions | 0.30 × 12.00 × 13.90 in |
| Arbor Size | 0.625 In. |
| Color Family | Red |
| Material Cut | Multi-Purpose |
| Model | D1080N |
| Number in Package | 1 |
| Number of Teeth | 80 |
| Power Tool Accessory Type | Circular Saw Blade |
| Saw Blade Diameter (in) | 10 |
| Saw Blade Material | Carbide |
| Tools Product Type | Power Tool |
Reviews (35)
35 reviews for DIABLO 10 in. x 80-Teeth Non-Ferrous / Plastic Cutting Saw Blade
Only logged in customers who have purchased this product may leave a review.
Related products
Saw Blades
Milwaukee 6 in. 18 Teeth per in. Medium Metal Cutting SAWZALL Reciprocating Saw Blades (5 Pack)
Model# 48-00-5184
Saw Blades
Milwaukee 6 in. 14 Teeth per in. Medium Metal Cutting SAWZALL Reciprocating Saw Blades (5 Pack)
Model# 48-00-5182
Saw Blades
Milwaukee 44-7/8 in. 18 TPI Bi-Metal Deep Cut Portable Band Saw Blade
Model# 48-39-0520
Saw Blades
Milwaukee 12 in. 8/12 TPI. Multi-Material Cutting SAWZALL Reciprocating Saw Blades (5-Pack)
Model# 48-00-5094
Saw Blades
Model# DW3106
Saw Blades
Milwaukee 8 in. 8/12 Teeth per in. Mutli-Material Cutting SAWZALL Reciprocating Saw Blades (5 Pack)
Model# 48-00-5093
Saw Blades
Model# D1060X
Saw Blades
Model# D1040X
Abdullah Hartmann (verified owner) –
Cut 1/8- 3/16 aluminum Box tube with ease.Clean uniform cut on my KeyLink Aluminum deck rail project.“Ship to home “ was disappointing as it arrived 4 days later than quoted.
Keyshawn Schamberger (verified owner) –
I put this on my miter saw to cut metal studs it worked alsome!
Thurman Lakin (verified owner) –
I would recommend this to anyone needing to work with any or all of the materials listed. I used it to cut 1/4 inch aluminum, and it performed beautifully.
Obie Lesch (verified owner) –
I bought this blade to cut acrylic sheet. The cutting is smooth without chatter and the finish cut has absolutely no chipping. Wonderful blade!
Viola Flatley (verified owner) –
Great blade I bought it too cut 1/2″ plexiglass cuts it like butter
Lola Jakubowski (verified owner) –
The usual good quality product. Performed the job well
Eileen Towne (verified owner) –
I am using this blade to cut 1/8 aluminum angle. Works wonderfully.
Rosanna Schumm (verified owner) –
We use this non-ferrous blade for cutting aluminum extrusions and is leaves a perfect, smooth cut everytime. The carbide tips have stayed sharp and have not “nicked” or rounded in any way. Highly recommended!
Casper Christiansen (verified owner) –
This blade was very good for my bathroom project to cut Schluter trim for tile edging and niche. Additionally used for the DreamLine shower door track cuts also.I wanted the accuracy for this project and spent the money but for 6 or 7 cuts, the cost is a bit high and hence the reason for the value. Since I will be doing a second bathroom, this becomes a bit less of a concern and will always have it when needed.
Lydia Gibson (verified owner) –
I needed to cut aluminum extrusion into 60 short pieces. The cut quality was very good with minimal flash to remove. The blade was installed on a compound miter saw. It will be a good tool to have in my toolbox.
Austyn Bartell (verified owner) –
Nice, smooth cuts.
Myrna Bartoletti (verified owner) –
Purchased for use on 3/16″ plastics. It performed as expected. After shopping around it was the best price.
Chaim Steuber (verified owner) –
This blade works great for cutting extruded aluminum. I use material up to 1/8 of an inch thick, and this blade cuts it cleanly and quickly. The small kerf is also great. I highly recommend this blade.
Bettye Cremin (verified owner) –
This saw blade is correct for aluminum
Modesta Russel (verified owner) –
This blade worked perfectly for cutting light and medium weight extruded aluminum.
Aimee Wisozk (verified owner) –
This is a very expensive blade but well worth it when you consider the quality of cut. Acrylic cuts are close to perfect and need minimal cleanup to produce a smooth edge.
Alice Reichert (verified owner) –
I used the blade to cut aluminum angles and straps. The cuts were very clean.
Johnathon Lindgren (verified owner) –
We use these blades to cut aluminum 6063 extrusion on a production basis. They have a small kerf and work great unless you get them too hot.
Courtney Bailey (verified owner) –
Good blade for cutting plastics smooth edges.
Susie Kozey (verified owner) –
Worked perfectly for cutting PVC molding.