DIABLO 10 in. x 80-Teeth Non-Ferrous / Plastic Cutting Saw Blade
$55.21
Diablo’s next generation 10 in. x 80 Tooth Non-Ferrous/Plastics Carbide Circular Saw Blade features new laser-cut stabilizer vents for precise and clean cuts in non-ferrous metals and plastic materials. The advanced stabilizer vents feature a permanent filler baked in from top to bottom for absorbing noise and preventing sideways movement, allowing the blade to slice through materials cleanly, quickly and accurately. Constructed with TiCo Hi-Density special-blend carbide, Diablo’s 10 in. non-ferrous metals/plastics blade produces precise cuts and provides 5X longer cutting life. The laser cut heat expansion slots allow the blade to expand and contract during use, keeping the cut true and straight. This blade is excellent for cutting plastics, brass, aluminum, copper and fiberglass.
In stock
Description
Diablo’s next generation 10 in. x 80 Tooth Non-Ferrous/Plastics Carbide Circular Saw Blade features new laser-cut stabilizer vents for precise and clean cuts in non-ferrous metals and plastic materials. The advanced stabilizer vents feature a permanent filler baked in from top to bottom for absorbing noise and preventing sideways movement, allowing the blade to slice through materials cleanly, quickly and accurately. Constructed with TiCo Hi-Density special-blend carbide, Diablo’s 10 in. non-ferrous metals/plastics blade produces precise cuts and provides 5X longer cutting life. The laser cut heat expansion slots allow the blade to expand and contract during use, keeping the cut true and straight. This blade is excellent for cutting plastics, brass, aluminum, copper and fiberglass.
- TiCo high-density carbide for increased performance and maximum cutting life
- Perma-SHIELD non-stick coating for protection against heat, gumming and corrosion
- Super-thin kerf design for fast and effortless cuts
- New advanced laser-cut stabilizer vents absord noise and vibration, and prevent sideways movement for precise, clean cuts
- Tri-Metal Shock Resistant Brazing to withstand extreme impact
- Precision tensioning is a computer controlled process to keep the blade flat for a better quality finish
- Laser cut heat expansion slots allow the blade to expand and contract without warping for straight and accurate cuts
- Great for cutting non-ferrous metals, plastics, melamine and wood
- Blade can be used on 10 in. miter saws, 10 in. slide miter saws and table saws (portable and stationary)
- Red saw blades are a trademark of Freud America, Inc.
- Covered by a limited lifetime manufacturer warranty
Additional information
| Weight | 1.80 lbs |
|---|---|
| Dimensions | 0.30 × 12.00 × 13.90 in |
| Arbor Size | 0.625 In. |
| Color Family | Red |
| Material Cut | Multi-Purpose |
| Model | D1080N |
| Number in Package | 1 |
| Number of Teeth | 80 |
| Power Tool Accessory Type | Circular Saw Blade |
| Saw Blade Diameter (in) | 10 |
| Saw Blade Material | Carbide |
| Tools Product Type | Power Tool |
Reviews (35)
35 reviews for DIABLO 10 in. x 80-Teeth Non-Ferrous / Plastic Cutting Saw Blade
Only logged in customers who have purchased this product may leave a review.
Related products
Saw Blades
Milwaukee 8 in. 8/12 Teeth per in. Mutli-Material Cutting SAWZALL Reciprocating Saw Blades (5 Pack)
Model# 48-00-5093
Saw Blades
Model# D1024X
Saw Blades
DEWALT 12 in. Miter Saw Blade 32-Teeth and 80-Teeth (2-Pack)
Model# DW3128P5
Saw Blades
Model# D1080X
Saw Blades
Model# 48-00-8788
Saw Blades
DIABLO 7-1/4 in. x 24-Teeth Tracking Point Framing Saw Blade
Model# D0724R
Saw Blades
Milwaukee 9 in. 18 Teeth per in. Medium Metal Cutting SAWZALL Reciprocating Saw Blades (5 Pack)
Model# 48-00-5188
Saw Blades
Milwaukee 6 in. 24 Teeth per in. Thin Metal Cutting SAWZALL Reciprocating Saw Blades (5 Pack)
Model# 48-00-5186
Kelton Keeling (verified owner) –
Worked really well on cutting my aluminum sheeting for my snow cab, as well as the plastic for the windows, 3/16 inch.
Yasmeen Torphy (verified owner) –
Works great
Wilhelm Goldner (verified owner) –
I bought this for cutting aluminum angle and it worked great in the chop saw. It could trim off 1/8 inch off of the end without distorting the material.
Jalon Boyle (verified owner) –
Cuts smoothly. Selected this particular blade as I frequently cut through PVC, plexiglass, ABS, and other plastics. The stock blade that was included with my 10” Dewalt miter wasn’t terrible, in fact for a general purpose blade included with the tool it was pretty solid, had carbide teeth and ripped soft to medium woods pretty well, but it had to be massaged a bit more when cutting plastics. This Diablo has been a good upgrade in that regard. I’m nowhere near as nervous about kickback.It gets marketed as being quieter than standard blades. It could be, and I like the idea of manufacturers looking for ways to reduce excessI’ve noise output, but the mechanism of my miter is so loud already that the difference in ringing from the blade on its own is hard to discern. Which is fine. It cuts a wide range of material very cleanly, which was the primary goal.
Kamren Hickle (verified owner) –
Great blade. Used it to cut plexiglass and cut easily with no chipping.
Nikolas Purdy (verified owner) –
Cut the PVC siding without chipping unless I went too fast.
Kayleigh Little (verified owner) –
The blades arrived late and because of that I could not use the blade for its intended purpose
Pierre Lowe (verified owner) –
Second one of these blades that I purchasedGreat blade Perfect resultsDefinitely recommend
Keaton Stark (verified owner) –
Cuts heavy gauge aluminum very well. Nice smooth cuts.
Ethyl Thiel (verified owner) –
Cut the PVC siding without chipping unless I went too fast.
Bernie Paucek (verified owner) –
Just what I needed for cutting Plexiglass.
Dovie Christiansen (verified owner) –
Purchased this blade a couple of weeks ago. Using this blade on a Ryobi table saw to cut sheet aluminum (1/8″ and 1/16″). The cuts are smooth, and the blade goes through the aluminum with very little force needed. Very much worth the cost.
Hettie Wolf (verified owner) –
Nice clean cut with no ragged tearout.
Leonie Ferry (verified owner) –
Using blade to cut 1/4″ acrylic with a table saw. Very smooth cut leaving a fairly clean finish.
Clay Prosacco (verified owner) –
easy to install cuts great for plastic acrylic nice and fine cut great for welding acrylic together