DIABLO 12 in. x 60-Tooth Steel Demon Cermet II Carbide Blade for Ferrous Metals & Stainless Steel
$49.40
Diablo Steel Demon Cermet II Carbide Blade is ideal for use in cutting ferrous metals, such as steel studs, angle iron and flat bar.
In stock
Description
Diablo’s new Steel Demon Cermet blades cut both metal and stainless steel while providing 5x the cutting performance than standard metal cutting blades. By delivering the ultimate metal cutting performance and unmatched value story, this blade is a game changer for metal cutting. This blade features new, exclusive innovation with specially formulated Cermet teeth with a Triple Chip Grind Tooth Design, laser cut blade bodies, anti-vibration technology, and Perma-Shield non-stick coating to deliver precise cuts with no sparks and cool, burr-free edges.
- Newly formulated Type II Cermet technology provides a high heat tolerance and increased hardness for superior wear and impact resistance
- Exclusive cermet technology for up to 5X longer than standard carbide
- Improved Laser Cut Stabilizer Vents trap noise and vibration for maximum stability, keeping the blade cool with accurate cuts in metal cutting applications
- Triple Chip Tooth provides less sparks, burr-free finish and longer life
- Tri-Metal Shock Resistant Brazing a three metal brazing system allows metal cutting carbide tips to withstand extreme impact for maximum durability
- Perma-SHIELD non-stick coating for less heat and corrosion
- Ideal for use when cutting ferrous metals and stainless steel
- Red saw blades are a registered trademark of Freud America, Inc.
Additional information
| Weight | 3.10 lbs |
|---|---|
| Dimensions | 0.25 × 13.88 × 15.63 in |
| Arbor Size | 5/8 |
| Color Family | Red |
| Material Cut | Metal |
| Model | D1260CF |
| Number in Package | 1 |
| Number of Teeth | 60 |
| Power Tool Accessory Type | Circular Saw Blade |
| Saw Blade Diameter (in) | 12 |
| Saw Blade Material | Carbide |
| Tools Product Type | Power Tool |
Reviews (38)
38 reviews for DIABLO 12 in. x 60-Tooth Steel Demon Cermet II Carbide Blade for Ferrous Metals & Stainless Steel
Only logged in customers who have purchased this product may leave a review.
Related products
Saw Blades
DEWALT Bi-Metal Reciprocating Saw Blade Set (15-Piece) with Tough Case
Model# DW4890
Saw Blades
Milwaukee 44-7/8 in. 18 TPI Bi-Metal Deep Cut Portable Band Saw Blade
Model# 48-39-0520
Saw Blades
Model# D1080X
Saw Blades
Model# DW3795H
Saw Blades
DEWALT 12 in. Miter Saw Blade 32-Teeth and 80-Teeth (2-Pack)
Model# DW3128P5
Saw Blades
Milwaukee 8 in. 8/12 Teeth per in. Mutli-Material Cutting SAWZALL Reciprocating Saw Blades (5 Pack)
Model# 48-00-5093
Saw Blades
Milwaukee 12 in. 5 Teeth per in. Wood Cutting SAWZALL Reciprocating Saw Blades (5 Pack)
Model# 48-00-5037
Saw Blades
Milwaukee 9 in. 14 Teeth per in. Medium Metal Cutting SAWZALL Reciprocating Saw Blades (5 Pack)
Model# 48-00-5187
Rhianna O’Reilly (verified owner) –
Just as good as Milwaukee it cheaper.
Delphine Lehner (verified owner) –
Better than expected.. Thanks..
Nestor Steuber (verified owner) –
I have only made a few cuts so far, it is working great on mild steel 1/4″ thick. I am using this blade in a table saw
Rusty Kovacek (verified owner) –
I bought this for my miter saw to cut iron spindles and it did a fantastic job. I’d highly recommend it!
Monte Lakin (verified owner) –
Blade cuts real good. I am happy i purchased the blade to cut metal roofing . Would purchase again if need be.
Rosetta Tromp (verified owner) –
Ran this in my 14” abrasive chop saw so rpm of motor and 9” Diablo blade were pretty close. Seems to be cutting well.
Aliyah Klocko (verified owner) –
The Diablo steel demon cermet ll carbide blade cut through 1 1/2″ galvanized pipe quickly and cleanly. No over heating or tarnishing the metal.
Alessia Wolf (verified owner) –
This saw blade is designed for LOW RPM saws specifically designed for metal cutting. Maximum rpm is 1800. Most abrasive chop saws are spinning at 3300-3500 rpm and are over heating the blade and destroying it and complaining about their inability to follow directions.I use this blade on my Slugger by Fein (1300 rpm) and it cuts sooo good. It has a thinner kerf than competing blades which gliders thru mild steel. I even had a piece of angle slip from the clamp, jamming the saw and did not damage the teeth.Ignore the whiners that don’t pay attention to machine specifications, it’s a great blade.
Shaina Hand (verified owner) –
It is nice
Jacky Hahn (verified owner) –
Did not get the right oneIt needed to be 5/8 diameter bore size .But overall was good service
Bud Flatley (verified owner) –
Great blade diablo is great products first blade lost some teeth while cutting after a month of cutting steel diablo Warrantied and replaced that why I by diablo company stands behind their product’s!
Asia O’Kon (verified owner) –
Cuts clean and smooth.
Leila VonRueden (verified owner) –
Preforms better than the other 8” metal cutting blades I have purchased. Home Depot shipping from site to store takes a while but just have to plan ahead and order about 2 weeks before you need it to make sure you have plenty of time.
Trystan Ryan (verified owner) –
Cuts clean and quickly
Eino Homenick (verified owner) –
Love the Diablo 14 in. by 90 tooth carbide blade! Cuts steel like butter with almost no heat. Beats the carbon blades by a mile. Should’ve got it a long time ago. I highly recommend it!
Waylon Turcotte (verified owner) –
Used on my Milwaukee abrasive chop saw. I have made about 50 cuts through 1/8″ wall 2″ steel pipe. Still cuts pretty nice.I was a little nervous because the blade max rpms is 3000 and my saw spins 3400, but the blade seems to be holding up fine. No problems.Still waiting to see about longevity.
Rae Weber (verified owner) –
Worked better than expected.
Marquise Koss (verified owner) –
Worked as as advertised