DIABLO 8 in. x 12-Teeth Stacked Dado Saw Blade Set
$124.95
Make splinter-free cuts and flat bottom grooves with the help of this Stacked Dado Saw Blade Set designed by Diablo. Offers heat and corrosion resistance.
In stock
Description
Make splinter-free cuts and flat-bottom grooves with the Diablo 8 in. x 12-Tooth Stacked Dado Saw Blade Set. It includes a carrying case, two blades, two wing chippers and shims constructed from durable micro-grain titanium carbide for a design that is durable, strong and razor-sharp. Use these blades on 5/8 in. laser-cut arbors for accurate blade rotation.
- Designed to fit 5/8 in. laser-cut arbors for accurate blade rotation
- Cuts, rips and makes dados in wood cleanly and accurately
- Micro-grain titanium carbide offers durability and precise cuts
- Perma-SHIELD non-stick coating protects against heat, gumming and corrosion
- Features resharpenable blades for making grooves from 1/4 to 13/16 in. in 1/16 in. increments
- Includes 2-blades, 2-wing chippers, shims and carrying case
Additional information
| Weight | 6.05 lbs |
|---|---|
| Dimensions | 2.00 × 11.40 × 8.80 in |
| Arbor Size | 0.625 In. |
| Color Family | Red |
| Material Cut | Wood |
| Model | DD208H |
| Number in Package | 1 |
| Number of Teeth | 12 |
| Power Tool Accessory Type | Circular Saw Blade |
| Saw Blade Diameter (in) | 8 |
| Saw Blade Material | Carbide |
| Tools Product Type | Power Tool |
Reviews (81)
81 reviews for DIABLO 8 in. x 12-Teeth Stacked Dado Saw Blade Set
Only logged in customers who have purchased this product may leave a review.
Related products
Saw Blades
Model# D1060X
Saw Blades
Model# D1040X
Saw Blades
DEWALT 12 in. Miter Saw Blade 32-Teeth and 80-Teeth (2-Pack)
Model# DW3128P5
Saw Blades
Model# D1024X
Saw Blades
Milwaukee 6 in. 14 Teeth per in. Medium Metal Cutting SAWZALL Reciprocating Saw Blades (5 Pack)
Model# 48-00-5182
Saw Blades
Milwaukee 44-7/8 in. 18 TPI Bi-Metal Deep Cut Portable Band Saw Blade
Model# 48-39-0520
Saw Blades
DIABLO 10 in. x 80-Teeth Non-Ferrous / Plastic Cutting Saw Blade
Model# D1080N
Saw Blades
Milwaukee 12 in. 8/12 TPI. Multi-Material Cutting SAWZALL Reciprocating Saw Blades (5-Pack)
Model# 48-00-5094
Triston Jacobs (verified owner) –
Worked as needed, very precise for the cost. Good value. Works with SawStop table saw.
Hillary Heller (verified owner) –
Easy to use. It’s a popular item so there’s a lot of information on the internet about how to use it.
Payton Stracke (verified owner) –
I purchased this set to replace a cheaper set that did not cut a flat bottom dado (it looked like the bottom had grooves). This set of blades did cut a smooth bottom dado and clean surface edges as well.
Cecil Kozey (verified owner) –
It is difficult these days to find a product NOT “made in China” but Diablo blades are a quality find that satisfies the search. This is the third blade I bought of theirs. All my saws now have Diablo blades. I recommend them to anyone needing a reliable, clean cutting, long lasting saw blade.
Izaiah Grant (verified owner) –
Great dado stack for my new garage workshop. Will come in handy for many projects to come.
Dayana Okuneva (verified owner) –
Awesome set of dado blades. Bought a less expensive pair earlier on and my dados and grooves would have course bottoms I would have to chisel or sand out.Enter Diablo Freud dado blades. These guys cut a very smooth channel with minimal sanding needed almost effortlessly. Love love love these and looking forward to using them in my shop.
Meta Nienow (verified owner) –
Was perfect able to make multiple sizes of dado cuts.
Aurelia Mills (verified owner) –
This dado blade really cuts smoothly. I have to say it exceeded my expectations. I went with the more expensive Diablo because I wanted high quality, and this blade delivered it. I’m very happy with the performance, and they did include various sized shims to get the perfect cut.
Darlene Jaskolski (verified owner) –
Fantastic blades! Not cheap but worth every penny. Go to the website to get blade setup info.
Aurelie Konopelski (verified owner) –
Installed it on an old Craftsman table saw (Model No. 137.248880) which is limited to 1/2″ dado blade–works great, just have to make an extra pass for thicker cuts. Nice set, and packaging is reusable and keeps the set together.
Edna Hettinger (verified owner) –
Clean cuts with little or no tearing.
Esperanza Kreiger (verified owner) –
Can’t go wrong with the Diablo Stacked Dado set!This was my foray into the use of a stacked dado blade. I undertook the effort of building kitchen cabinets and I knew that to do them properly I needed the backboard to be dado’d into the side panels. My table saw is a Craftsman 113.298 and is at least 40 years old! It’s also a 10″ blade saw, so I was concerned about using an 8″ blade. Several friends that have used stacked dado’s said, “Don’t go cheap! Expect to pay over $200…”All in all, I cut nearly 100 dado slots, mostly 1/2″ and a handful of 3/4”. The saw handled this set wonderfully! My cuts were only 3/8″ deep, so the blade size different had zero impact. All of the cuts were very clean and my board fits very smoothly and the cabinets turned out amazing!Advise I’d give after you buy this is to make sure you keep consistent pressure on the board as it goes over the blade, not all boards are completely flat and I did encounter 1 cut that wasn’t deep enough and it caused me to scratch my head for a long while trying to figure out what was wrong. Also, buy a new zero clearance insert for your saw at the time you get this set. If your saw is anything like mine, the blade insert is metal and the hole is not easily expandable. It’s way smarter & better to have an insert sized for doing dado cuts. Don’t be like me and make the cuts without an insert!
Granville Oberbrunner (verified owner) –
The sides of the cut are clean but the bottom of the cut is nowhere near flat when using the chippers.
Amparo Schamberger (verified owner) –
Work amazing
Lily Tillman (verified owner) –
Very smooth cut will buy again
Rosetta Lubowitz (verified owner) –
a must have worth every dollar
Raheem Gerlach (verified owner) –
I used this Dado Stack for two types of cuts in my window shutter project, a Rabbet cut and a dado cut. For the Rabbet cuts I was somewhat disappointed. The Stack leaves ridges in the wood when making a Rabbet cut. The depths of the cuts are more uneven than I expected, and may be the result of 1) each saw tooth is cut with a relief (not flat on the end), and 2) I had to make multiple passes to get the width I needed. For the dado cuts the ridges were essentially invisible and therefore not a problem, but the cut width was important. The information given about how many chippers, spacers and shims are needed to make a specific cut width is not accurate. Always make a test cut to see if the Blade Stack is making the cut width you need. Calipers are handy for this task, for both measuring the width of the cut and measuring the width of the spacers and shims. For the purpose of making window shutters I think the quality of the Rabbet cuts will suffice, but I would hesitate to recommend this product for furniture quality work if Rabbet cuts are required.
Emerson Schiller (verified owner) –
Pretty clean cut for a modest price, only issue is its quite a tight fit to slide blades/chippers into arbor, but I’m sure that’s part of the reason you get a decent cut.
Hubert Koch (verified owner) –
Did a large project that required making tongue and groove parts. The blades are not all the same diameter so there were high and low spots on both the tongues and grooves. Had to use sandpaper and chisel to make the parts fit. The difference is not a lot, maybe a few thousands of an inch, but it was enough to prevent the parts from fitting properly. This made my large project even bigger. I would not recommend this if you need nice smooth dados.
Eladio Dooley (verified owner) –
This was my first ever dado set and it exceeded my expectations. I’ve had my eye on this for a while and am so glad I finally purchased. I am a hobby woodworker at best, but this dado set has opened up so many possibilities for me. Did a trial run with it and it went so smoothly that I jumped right into my first project with it.