DIABLO 1/4 in. x 1 in. Carbide Straight Router Bit
$20.97
Ideal for general stock removal, the Diablo 1/4 in. x 1 in. Carbide Straight Router Bit has a kickback-reducing design that fosters smooth, balanced operation for controlled, safe cuts. It’s constructed with solid carbide to withstand high temperatures and features a non-stick coating to reduce friction. Impact resistance comes courtesy of tri-metal brazing, keeping vibrations to a minimum for superb maneuverability.
In stock
Description
Ideal for general stock removal, the Diablo 1/4 in. x 1 in. Carbide Straight Router Bit has a kickback-reducing design that fosters smooth, balanced operation for controlled, safe cuts. It’s constructed with solid carbide to withstand high temperatures and features a non-stick coating to reduce friction. Impact resistance comes courtesy of tri-metal brazing, keeping vibrations to a minimum for superb maneuverability.
- Provides a safe, controlled cut ideal for general stock removal
- Tri-metal brazing provides an impact-resistant bond between the carbide and bit
- Solid carbide is corrosion-resistant and stands up to heavy-duty use
- Requires a minimum chuck size of 1/4 in.
- Overall diameter = 1/4 in.
- Carbide height = 1 in.
- Shank diameter = 1/4 in.
- Overall length = 2-1/2 in.
Additional information
| Weight | 1 lbs |
|---|---|
| Dimensions | 1.99 × 1.95 × 5.68 in |
| Bit Material | Carbide |
| Cut Diameter | .25 |
| Individual/Set | Individual |
| Model | DR04108 |
| Number of Flutes | 2 |
| Number of Pieces | 1 |
| Product Length (in.) | 2.5 |
| Router/planer type | Straight |
| Self-Feeding | No |
| Shank Diameter (in.) | 1/4" |
| Shank Style | Straight |
| Tools Product Type | Power Tool |
Reviews (58)
58 reviews for DIABLO 1/4 in. x 1 in. Carbide Straight Router Bit
Only logged in customers who have purchased this product may leave a review.
Related products
Woodworking Tool Accessories
Model# DR32102
Woodworking Tool Accessories
Model# DR18104
Woodworking Tool Accessories
Model# DR82116
Woodworking Tool Accessories
Model# DR42102
Woodworking Tool Accessories
DIABLO 1/2 in. x 5/16 in. Carbide Hinge Mortising Router Bit
Model# DR16560
Woodworking Tool Accessories
Milescraft Design/InlayKit Complete Kit for Routing Designs and Inlays
Model# 1207
Woodworking Tool Accessories
Model# 48-08-0260
Woodworking Tool Accessories
Model# DR99035
Hildegard Heidenreich (verified owner) –
Just like before the tool delivered a solid performance in cutting a clean path with my router. I would buy another one but if history is any indication it will be a long while before that’s required.
Jamal Mann (verified owner) –
This is not my first Diablo router bit, and like the others this one worked very well, just like I expected it would. Diablo makes decent products. I have a lot of their saw blades and never had a problem. Their sanding products are very good also. I definitely would buy their products again.
Rebekah Luettgen (verified owner) –
Diablo is the way to go, the sharpest and longest lasting brand on the market.
Delbert Hessel (verified owner) –
Good material
Modesto Wolf (verified owner) –
Works perfectly.
Claudia Watsica (verified owner) –
It is an effort to open the package. Enough so that I will try not to buy more.
Jaydon King (verified owner) –
The bit cut very clean and has stayed sharp through out my project. I was cutting edges off of hard red oak. Cheap bits were lasting about 30 minutes before getting dull and hot.
Jack Gaylord (verified owner) –
Sharp cutting edges. Worked exactly as I expected it to.
Carleton Jast (verified owner) –
Excellent straight cut
Zella Schneider (verified owner) –
It has done a great job so far. I dont push it to hard. I have had it for a couple off weeks.
Gerson Feil (verified owner) –
Worked for what I bought it for but rather expensive and not sure the quality is there.
Daron Witting (verified owner) –
Worked well and nice and sharp.
Tyreek Kertzmann (verified owner) –
Works great
Alan O’Connell (verified owner) –
Standard 1/4 inch router bit. Performance is what is expected.
Lisa McLaughlin (verified owner) –
Good for soft woods, burnt it up on oak
Allison Zulauf (verified owner) –
The router bit is exactly what I needed and did the job smoothly.
Maia Streich (verified owner) –
Worked well.
Isom Ritchie (verified owner) –
Good bit. stayed sharp all through my project.
London Marks (verified owner) –
Worked perfectly! No complaints at all. My only issue was how much I spent on the cheaper Ryobi bits and continuously broke those. Should have spent a little more from the start.
Alexandria Mraz (verified owner) –
I inherited a number of older woodworking power tools from an uncle of mine. In this group of tools was a great early 90’s router. It came with a router bit already installed, but, it was rusty and wasn’t the size I needed. While scoping out the bits at HD, I came across the Diablo 1/4 in x 1 in carbide straight router bit. It was exactly what I needed. When I got the bit home, I realized I needed to do some maintenance to the old router. I oiled it down, cleaned it off (not in that order) and removed the old bit. Happy with the fact that the old router had some life left in it, I was pleased with the idea of firing it up with a brand new bit installed. That’s when I discovered problem number one of two issues with the bit, both having to do with packaging. The bit comes in a modified clam shell that seems to be ultrasonically sealed. It requires the use of either scissors (very sharp scissors) or other blade like instrument to extricate the bit from the packaging. That’s when it first drew blood! I opted for the later, a utility knife to free the bit. In doing so, the packaging’s resentment for my choice of tools became clear as in one pass of the blade the packaging bit into my finger drawing what to my eyes was nearly a quart of blood. While another man would have been phased by this blood letting I knew that this was just part of working with a bit named “Diablo.” After I regained consciousness, and the bit was free of the packaging, I realized there was still one more hurtle for me to free the bit, the holder the bit was standing in. This shouldn’t have been a problem, but the stand was relenting to forgo it’s hold on “El Diablo.” As I pried and prodded the bit with various tools, it struck me that I should just use my fingers and take hold of the bit to remove it. When I came too, I had probably lost another quart of blood, but El Diablo was free!!!