DIABLO 3/4 in. x 1-1/2 in. Carbide Straight Router Bit
$26.21
The Diablo 3/4 in. x 1-1/2 in. Carbide Straight Router Bit features a kickback-reducing design that delivers a safe, controlled cut. The unique carbide geometry of the Back-Relief Grind technology improves chip clearance and reduces heat buildup.
In stock
Description
The Diablo 3/4 in. x 1-1/2 in. Carbide Straight Router Bit features a kickback-reducing design that delivers a safe, controlled cut. The unique carbide geometry of the back-relief grind technology improves chip clearance and reduces heat buildup.
- Produces smooth cuts with little to no vibration
- High-density carbide body with titanium construction offers a long cutting life
- 3/4 in. Cut diameter with 1-1/2 in. maximum depth
- Requires a minimum chuck size of 1/2 in.
Additional information
| Weight | 1 lbs |
|---|---|
| Dimensions | 1.99 × 1.95 × 5.68 in |
| Bit Material | Carbide |
| Cut Diameter | .75 |
| Individual/Set | Individual |
| Model | DR12156 |
| Number of Flutes | 2 |
| Number of Pieces | 1 |
| Product Length (in.) | 3 |
| Router/planer type | Straight |
| Self-Feeding | No |
| Shank Diameter (in.) | 1/2" |
| Shank Style | Straight |
| Tools Product Type | Power Tool |
Reviews (49)
49 reviews for DIABLO 3/4 in. x 1-1/2 in. Carbide Straight Router Bit
Only logged in customers who have purchased this product may leave a review.
Related products
Woodworking Tool Accessories
Model# DR16116
Woodworking Tool Accessories
Model# DR42102
Woodworking Tool Accessories
Model# DR75102
Woodworking Tool Accessories
Model# DR30110
Woodworking Tool Accessories
Model# DR64100
Woodworking Tool Accessories
Bosch 27 in. x 18 in. Aluminum Top Benchtop Router Table with 2-1/2 in. Vacuum Hose Port
Model# RA1181
Woodworking Tool Accessories
DIABLO 1/2 in. x 5/16 in. Carbide Hinge Mortising Router Bit
Model# DR16560
Woodworking Tool Accessories
Model# DR18104
Sandra Powlowski (verified owner) –
This bit did what I was expecting
Ola Rolfson (verified owner) –
I had to return this bit because it required a 1/2″ chuck, a fact that is not readily apparent from the packaging. However, I replaced it with the smaller Diablo bit and it was excellent. Cut through oak like butter. The Diablo bits are pricey but they work, which is something that cannot be said for all bits.
Chris Cummings (verified owner) –
Rather be at work perfectly cut a three-quarter inch channel down the middle of a 4 x 4 and assemble the headboard for a queen bed
Idella Herman (verified owner) –
Excellent router bit. Cut very clean dado and was exact size.
Maureen Kovacek (verified owner) –
Love these bits. They cut smith and have virtually no vibration.
Mollie Keebler (verified owner) –
did the job
Scarlett Ondricka (verified owner) –
This bit is exactly the size I needed. It is very sharp and cuts cleanly. What else can you say about a new router bit?
Cullen Gulgowski (verified owner) –
Does what a router bit is suppose to do over a lot of lumber
Osborne Cremin (verified owner) –
It did what I needed it to do.
Carlee Wuckert (verified owner) –
Worked very well for me.
Celia Kohler (verified owner) –
These Diablo router bits have carbide blades, which makes them excellent; don’t consider router bits that are not carbide. Years ago I bought a set of router bits because the cost was good, but they were not carbide. I’m now replacing the cheap ones with quality bits like this Diablo bit, I just buy the size bit I need one by one.
Alda Harris (verified owner) –
Removes material efficiently
Dorothea Schmeler (verified owner) –
Was building a new work bench and had several3/4″ dadoes to make with my Dewalt router. This bit did the job perfectly and was surprised how well it removed material. I expected to have to make a cut, then lower the bit to finish and discovered I could do the full depth in one pass.
Desiree Blanda (verified owner) –
Faster than a hot knife thru butter!!
Mariam Heathcote (verified owner) –
Great router bit!Got this right after upgrading to a 1/2″ collet router. I have a lot less vibration and more stability with this bit than with a 1/4″ collet 3/4″ mortising bit. I used this to cut 3/8″x3/4″ rabbets and dados into 3/4″ maple plywood and it flew through the material and left a glue-ready finish. Really like this bit. Diablo makes the best medium price range bits and they have always lasted me a long time.
Abigale Swaniawski (verified owner) –
Excellent router bit. It’s very hard to find good 1/2″ shanks at box stores. Kudos for Home Depot for carrying some of them for us wood workers.
Carmela Schinner (verified owner) –
The bit is used for routing cabinets using Porter Cable 890 series router(s) both plunge and mounted in a Kreg table (all from HD by the way). The cut and longevity of the Diablo bits is far superior to that of the low cost bits from China commonly found in “sets” with 1/4″ shanks. If your router will except 1/2″ bits that is what you should use, and well worth the extra money paid for these high quality smooth cutting bits.
Edyth Dooley (verified owner) –
A very nice router bit.
Edna Schiller (verified owner) –
Got the job done perfectly.
Lia Zemlak (verified owner) –
Can’t say anything bad about this bit. Have used it in a number of applications, including edge jointing boards on my router table, cutting large diameter circles (which also involved making plunge cuts) and cutting dados and rabbets for furniture and boxes. Have never noticed an issue with burning or a bad cut left from this. Definitely planning on buying other Diablo bits as a result of my experience with this one.