DIABLO Chamfer 45-Degree Router Bit
$31.46
Take your woodworking repertoire to the next level with the Diablo Chamfer 45-degree Carbide Router Bit. It’s outfitted with a bottom bearing that glides along your workpiece to produce clean, sharp angled edges every time. The solid carbide construction stands up to heavy-duty use and withstands high temperatures to produce controlled, safe cuts.
In stock
Description
Take your woodworking repertoire to the next level with the Diablo Chamfer 45-degree Carbide Router Bit. It’s outfitted with a bottom bearing that glides along your workpiece to produce clean, sharp angled edges every time. The solid carbide construction stands up to heavy-duty use and withstands high temperatures to produce controlled, safe cuts.
- High-density carbide body with titanium construction offers a long cutting life and produces an ultra-fine finish
- Perma-SHIELD non-stick coating helps protect the bit from heat, rust and pitch buildup
- Bottom bearing keeps bit steady along the intended cutline
- Requires a minimum chuck size of 1/4 in.
- Great for cutting wood, plywood, melamines and MDF
- Great for use on wood, plywood, melamines and MDF
- Overall diameter = 1-3/4 in.
- Bearing diameter = 1/2 in.
- Carbide height = 5/8 in.
- Angle = 45°
- Shank diameter = 1/4 in.
- Overall length = 2-3/16 in.
Additional information
| Weight | .24 lbs |
|---|---|
| Dimensions | 1.99 × 1.95 × 5.68 in |
| Bit Material | Carbide |
| Cut Diameter | 1-3/4 in |
| Individual/Set | Individual |
| Model | DR40106 |
| Number of Flutes | 2 |
| Number of Pieces | 1 |
| Product Length (in.) | 2.1875 |
| Router/planer type | Forming |
| Self-Feeding | No |
| Shank Diameter (in.) | 1/4" |
| Shank Style | Straight |
| Tools Product Type | Power Tool |
Reviews (40)
40 reviews for DIABLO Chamfer 45-Degree Router Bit
Only logged in customers who have purchased this product may leave a review.
Related products
Woodworking Tool Accessories
Model# DR12156
Woodworking Tool Accessories
Model# DR18104
Woodworking Tool Accessories
Model# DR16116
Woodworking Tool Accessories
Milescraft Design/InlayKit Complete Kit for Routing Designs and Inlays
Model# 1207
Woodworking Tool Accessories
Model# DR64100
Woodworking Tool Accessories
Model# DR75102
Woodworking Tool Accessories
Model# DR82116
Woodworking Tool Accessories
Model# DR34124
Kayley Schowalter (verified owner) –
Perfect bit for bevelled edges
Noemie Bailey (verified owner) –
Worked great for me. Have to make you a router base out of 1/4” Masonite so wide carbide cutters of bit can fit down thru center hole of base.
Geo Fisher (verified owner) –
Good quality bit.
Jakayla Daniel (verified owner) –
This bit worked exactly as I hoped it would. I used it to miter the corners of a small box I was building. A table saw set to a 45 degree angle might have worked better, but I don’t have one. The bit cuts well and worked well in my router table.
Arno Becker (verified owner) –
Built well with razor sharp edge. Blade holds edge after many bevels in hard wood
Owen Funk (verified owner) –
Very nice clean edges even for this novice of the router world.
Myrl Hintz (verified owner) –
It is absolutely fantastic and flawless in its performance. I’ve been using this to put a beveled edge on a new desk project and the routing is perfectly clean in walnut.
Mike Koch (verified owner) –
Get the Diablo and keep on cutting!! I replaced my aging and rotting fence this weekend. I added a rot board so the lawn service guys wouldt tear up the lower part of the pickets again. So I needed 28 2’x6’x16″ treated rot boards and I wanted a 45 degree cut where the pickets sit on top the rot board for a nice clean look the way professional fencing crews do. I started to go buy a cheap 45 degree Chamfer bit from the local, always 20% off coupon, store but couldn’t risk having to replace a bit mid-job with a crew of friends coming over to help do the job. My pine boards were heavily wet treated and it was raining all day on top of it. It cut clean straight lines two day in a row. Highly recommend for any big job where a clean consistent cut is needed.
Ryleigh Ritchie (verified owner) –
Very sharp and makes a very clean edge.
Zakary Berge (verified owner) –
The router bit has lasted five times longer than a cheaper model and I’m still using it.
Sydni Terry (verified owner) –
Diablo is always great quality and valye!
Caden Beahan (verified owner) –
Diablo makes great router bit they stay sharp when properly maintained
Audie Feest (verified owner) –
I have a small Makita compact router i planned to use with this, but it will not fit because the diameter at the top of the cutting surface is too large for the opening in the router bottom plate. It worked great in my large router that has a larger opening.
Casper Windler (verified owner) –
Great product, I used it for making a chamfer edge to 40+ coasters, and worked great.Used it in a craftsman router set in a router table.Price was also nice.
Sheridan Legros (verified owner) –
Freud bits aren’t the cheapest, but they absolutely erase wood. Hardwood, softwood: either feels like it’s not even there when the router bit touches it. Highly satisfied with all Freud router bits I’ve bought.One note about this one: it won’t fit the base plate of many routers. You may have to make a custom temporary base plate.
Neal West (verified owner) –
the bit is excellent quality and allowed me to add a Shaker look to my trim.
Cade Gerhold (verified owner) –
Yes I was very happy, it was sharp and functioned well for the shelves that we were building.
Kyra Baumbach (verified owner) –
Does a good job
Khalil Dach (verified owner) –
Works good, but pricy.
Emelie Ward (verified owner) –
Very good for what I needed