The Diablo 1/2 in. 3-Flute Flush Trim Carbide Bit has a kickback-reducing design that fosters smooth, balanced operation for controlled, safe cuts. It’s constructed with solid carbide to withstand high temperatures and features a Perma-SHIELD non-stick coating to reduce friction and pitch buildup. A bottom bearing glides along your workpiece to produce clean, uniform cuts while the three-flute design yields faster cutting and minimal vibration.
- For trimming laminate countertops and doing pattern work
- Cuts all composition materials, plywood, hardwoods and softwoods
- Perma-SHIELD non-stick coating helps protect the bit from heat, rust and pitch buildup
- High-density TiCo carbide body with titanium construction offers a long cutting life
- Red router bits are a registered trademark of Freud America, Inc.
- Overall diameter = 1/2 in.
- Bearing diameter = 1/2 in.
- Carbide height = 1 in.
- Number of flutes = 3
- Shank diameter = 1/4 in.
- Overall length = 2-13/16 in.
Sterling Roob (verified owner) –
Blade is awesome at chewing through the 3/4 in plywood I have used it on so far. Highly recommend.
Orlo Rau (verified owner) –
Used to trim about 40 linear feet of formica. Bit worked perfectly. Cut was clean with no chipping.
Garfield Pagac (verified owner) –
Nice bit, cut extremely well. The three flute design eliminated all the chatter, and produced an extremely smooth cut on my laminate.
Mervin Farrell (verified owner) –
The 3 flute gives a smoother cut then the standard 2 flute.
Aglae Gleason (verified owner) –
Great addition to my shop. Very sharp and wide.
Ryleigh Murazik (verified owner) –
I used it for about 1 minute and the guide wheel fell off. I’ve used them before and never had a problem. They are pretty sharp and cut clean.
Darian Pacocha (verified owner) –
Worked as expectedNo issuesGood product
Laverna Berge (verified owner) –
Good quality tool