Rip through nail-embedded wood with gently applied pressure using these Diablo Demo Demon Reciprocating Saw Blades. Leveraging patented variable tooth technology, the 9 in. x 6-12 TPI blades bite into lumber to make quick work of teardowns and demolition projects. Bi-metal construction gives the blades utmost durability and a Perma-SHIELD coating reduces drag for smooth operation in rugged applications.
- Perma-shield coating protects the blade from heat, gumming and corrosion
- 1 in. demolition body delivers straighter cuts with less vibration
- Ultra-hardened cutting edge provides utmost durability and longevity
- Unique plunge tip design enables faster and easier plunging
- Variable tooth density of 6 TPI to 12 TPI helps blade slice through nail-littered lumber
- Red reciprocating blades are a registered trademark of Freud America, Inc.
Vergie Barton (verified owner) –
Excellent sawall blades
Emie Ondricka (verified owner) –
Average cutting blades. I was expecting more from this product.
Walker Koss (verified owner) –
Excellent product. Excellent online ordering service. Thanks!
Enid Gleason (verified owner) –
Was a good buy
Polly Abbott (verified owner) –
Worked fine for dismantling the old fence. Save loads of time over taking it down one board at a time.
Mary Gottlieb (verified owner) –
My go to sawzall blades. they last a long time. Totally worth it.
Luis Stracke (verified owner) –
Very efficent
Gretchen Lehner (verified owner) –
I’ve been using Diablo blades for over 8 years. It’s an excellent brand and I will continue to use it.
Floy Cummerata (verified owner) –
Not as long lasting as the Milwaukee brand but acceptable as a substitute.
Rosemary Botsford (verified owner) –
It’s a good all purpose blade They seem to last and I cut Wood and nails with them
Werner Russel (verified owner) –
Great blades
Lawrence Hane (verified owner) –
worked as advertised. It cuts woods and cuts nails. Only used it 3 times so I can’t review durability.
Kareem Hudson (verified owner) –
Good quality
Rylee Gibson (verified owner) –
These blades work well for demo work. Cuts wood,nails,screws,galvanized pipe whatever. Blades cut along time before you have to change blades.
Hector Reilly (verified owner) –
what I needed for work
Anastasia Bernhard (verified owner) –
I have a Milwaukee Sawsall (not the Super). Blade fit and locked fine. I needed the 9 inch length as I was cutting off a bundle of boards that included a 4×6 and 2 – 2×4 boards on two sides. The blade worked fine. I do not know if I hit a nail but there are some in the area of the cut. If it cut through a nail, I did not notice any significant slow down. I was also sawing off excess overlay on a 1/2″ roofing sheet. It was overhanging the side of a 4×6 and extended up to the roof sheeting. The point on the bottom of the tip allow me to start the cut.when I could not reach the edge of the board. I held it down on the surface at the corner top; started the saw; and pulled the blade down the corner and it cut its way through to expose an edge. The blade worked fine in this mode. Once through the board, I was able to put side pressure on the saw and it bent the blade so that it was closer to being parallel to the board surface. Slightly rotating the sawsall kept the blade from penetrating the surface of the adjacent board that we do not want to cut. All in all it has worked fine.
Deja Nienow (verified owner) –
So I had (keyword here people is HAD) a junk hot tub that was built into my deck. I bought this blade because my harbor freight ones didnt “cut” it. These babies did the job and I still have them. I cut up the hot tub into manageable bits and sent the abomination away. So I cut through the guts, foam, metal, hoses, vinyl, wood, etc in single fell swoops. I think I wound up ruining one blade bc I went to town cutting away and scraping against the concrete pad so much. Needless to say I didnt have to get more. Highly recommended for any demo project.
Kelsie Waelchi (verified owner) –
I used the blades for outdoor small tree cutting and pruning. The blades worked great and made cuts effortless.
Jaclyn Conn (verified owner) –
Demo’d a kitchen. Had to cut thru nails, hardiplank, grout, wood simultaneously. Worked great. Seemed to dull a little quicker than expected. But overall was good. Will try Milwakees Torch type blades and hole saws next time.
Agustin Hessel (verified owner) –
cut through a tree that grew into a fence. With no prob