Dremel 1/16 in. Rotary Tool Round-Shaped Engraving Accessory for Wood, Fiberglass, Plastic, Jewelry and Soft Metals (2-Pack)
$6.26
The Dremel 106 1/16 in. Small Engraving Cutter is a quality cutter for detail engraving, carving and routing in wood, fiberglass, plastic and soft metals. Not for use with hardened materials. Use higher speeds for hard woods, slower speeds for metals. Use the sides of the cutter (rather than the tip) for effective cutting. The tip cuts poorly and can break under pressure.
In stock
Description
The Dremel 106 1/16 in. Small Engraving Cutter is a quality cutter for detail engraving, carving and routing in wood, fiberglass, plastic and soft metals. Not for use with hardened materials. Use higher speeds for hard woods, slower speeds for metals. Use the sides of the cutter (rather than the tip) for effective cutting. The tip cuts poorly and can break under pressure.
- Secure objects to a stable surface while working
- For best results, insert the accessory bit all the way into the tool and then back it out slightly before tightening down, this provides plenty of shank for the collect or chuck to hold onto the bit
- Use higher speeds for hard woods, slower speeds for metals and very slow speeds for plastics (to avoid melting at the point of contact)
- Includes: 2 bits
Additional information
| Weight | 0.020 lbs |
|---|---|
| Dimensions | 0.50 × 2.00 × 4.00 in |
| Accessory Fitment | Tool-Specific |
| Application Type | Cutting |
| Diameter (in.) | 0.06 |
| Model | 106 |
| Number of Pieces | 1 |
| Product Length (in.) | 1.501 in |
| Rotary Tool Accessory Type | Rotary Bit |
| Shank Size | 1/8 in. |
| Tip Material | Carbon Steel |
| Tip Shape | Round |
| Tools Product Type | Power Tool |
| Used With | Fiberglass, Plastic, Soft Metals, Wood |
Reviews (38)
38 reviews for Dremel 1/16 in. Rotary Tool Round-Shaped Engraving Accessory for Wood, Fiberglass, Plastic, Jewelry and Soft Metals (2-Pack)
Only logged in customers who have purchased this product may leave a review.
Related products
Rotary Tool Accessories
Model# EZ402
Rotary Tool Accessories
Model# 569
Rotary Tool Accessories
Model# 9901
Rotary Tool Accessories
Model# 570
Rotary Tool Accessories
Dremel 3/16 in. Rotary Tool Grinding Stone for Sharpening Chainsaw Blades (2-Pack)
Model# 454
Rotary Tool Accessories
Dremel EZ Lock Rotary Tool Cut-Off Wheel Set for Metal and Plastic (11-Piece)
Model# EZ688-01
Rotary Tool Accessories
Dremel 1/2 in. Rotary Tool 60-Grit Sanding Bands for Wood, Fiberglass, Rubber, and Metal (6-Pack)
Model# 408
Rotary Tool Accessories
Model# 225-01
Alta Schuppe (verified owner) –
very fine point and engraved both a watch and lighter given as a gift with ease
Carlo Steuber (verified owner) –
I was able to get into the corners much easier with this small powerful little head. I am sanding paint off of chairs and this is my detailing tool to finish off the job!
Wade Russel (verified owner) –
Used this for a wood project. Worked great
Kelli Mayer (verified owner) –
Drills a hole deep thrust to the point!
Peyton Lebsack (verified owner) –
I use this bit a lot, especially engraving shapes of animals, bird legs, claws and wings. Give the engraving, carving that extra touch
Edythe Glover (verified owner) –
Bought these for my husband and he uses them all the time for carving flags!
Tomas Rowe (verified owner) –
It is extremely precise when your writing something ,so easy .
Rene Bergstrom (verified owner) –
Tip stay sharp for a respectable time when engraving hardwood. Tip stays fairly cool if you raise it every half minute or so.
Caterina Cormier (verified owner) –
Just one of the tools you have to own because it does so many jobs. Sand, drill, wire brush, grinding, etc.
Jolie Tillman (verified owner) –
Used for etching bone mah jong tiles. Good results! Just purchased fir this purpose, but great fir the innovative customizations and refurbishing projects! Cost seems high for this little bit of a thing, but it is a specialized piece of kit….
Mose Morissette (verified owner) –
easy to use, you just need a steady hand and don’t use too quick a speed. works great.
Georgiana Stokes (verified owner) –
I have used these in my CNC router to carve designs into lexan. I can typically get 8 hours+ of carving (that is actual carving/cutting time) before needing to replace. This was with a spindle speed of approx 1500RPM and a travel speed (cutting) of between 10-15 inches per second (cutting depth = 0.050″ per pass). I plan to try different settings (depth, travel speed, spindle speed) to extend product life – but I’m happy with being able to get almost 10 projects finished on one bit. I also plan to try different materials (wood, other plastics) to see how this fares. Have bought additional units; would recommend.
Foster Mayer (verified owner) –
I use this bit a lot, especially engraving shapes of animals, bird legs, claws and wings. Give the engraving, carving that extra touch
Clinton Nienow (verified owner) –
This drill did everything I needed it to do. Very easy to work with, yet small enough, for detailed work. A must have, if your working with wood. Can’t beat the price.
Axel Gibson (verified owner) –
This bit worked great for me on aluminum, steel, acrylic, plastic, and hardwood. I used the Milwaukee M12 rotary tool.
Corine Kulas (verified owner) –
Needed a tool to do some detailed carving on some oak, this bit made all the difference, made nice clean cuts with ease.
Aniyah Hirthe (verified owner) –
Product works just as expected. Havent really had a chance to explore all the available options, but it is definitely on my to-do list.
Everette Hettinger (verified owner) –
First, I love Dremel’s – they make great rotary tools, and their accessories (like this small Ball Nose Burr) are also good quality – especially when considering the low cost.Are their better rotary burrs, and cutters out there – sure, but Dremel burrs and cutters will definitely get the job done.