Dremel 1-1/2 in. Rotary Tool Mandrel for Discs, Wheels and Sanding Bands Kit

Dremel 1-1/2 in. Rotary Tool Mandrel for Discs, Wheels and Sanding Bands Kit

Name: Dremel 402 1-1/2 in. Rotary Tool Mandrel for Discs, Wheels and Sanding Bands Kit
Brand: Dremel
SKU: HD202263133
Price: 3.11 USD
Availability: InStock
Rating: 4.42 (25 reviews)

Rated 4.42 out of 5 based on 24 customer ratings

$3.11

A shank with a screw-like head. Used primarily with Dremel polishing bits and accessories. For best results, insert the mandrel all the way into the tool and then back it out slightly before tightening down. This provides plenty of shank for the collect or chuck to hold onto. Simply remove the screw, line up a cut-off wheel or sanding band over the hole in the shank and replace and tighten the screw.

In stock

SKU: HD202263133 Category: Rotary Tool Accessories Brand: Dremel

Description

Shank with screw like head
Use with discs and wheels
Plenty of shank for the collet or chuck to hold onto
Mandrel to be used with all cutting wheels, sanding discs and polishing wheels
Compact depth guide: round front that can be used for tracing a pattern or following an edge
Compact depth guide: compatible with the vacuum attachment to keep your work place clean
Shank diameter 1/8 in., 3 mm, 2 mm
Insert the small screw through the hole in the cut-off wheel then tighten the screw into the mandrel’s threaded head

Additional information

Weight	0.02 lbs
Dimensions	0.60 × 2.00 × 4.00 in
Accessory Fitment	Tool-Specific
Application Type	Sanding
Diameter (in.)	1.5 in
Model	402
Number of Pieces	1
Product Length (in.)	1.5 in
Rotary Tool Accessory Type	Mandrel
Tools Product Type	Power Tool

Reviews (25)

25 reviews for Dremel 1-1/2 in. Rotary Tool Mandrel for Discs, Wheels and Sanding Bands Kit

Rated 5 out of 5

Lupe Casper (verified owner) – August 18, 2022

There’s a wrench in the kit. The other end of the wrench is the screw driver, to be used on the teensie screw. Even my sewing machine screwdrivers are too hard of a metal to be used on this teensie screw. This is a 3000, maybe dremel fixed things with this model???
Rated 5 out of 5

Rosie Bauch (verified owner) – August 15, 2022

I have had a Dremel since about 1968. I have used the mandrel, which has changed over the years, and a cut off wheel more than any of the other tools. In other words, I use it a lot. I have never had a problem with it. I notice that the new one is an EZ-Lock mandrel (I just ordered an accessory kit). I will interested to see how this works.
Rated 4 out of 5

Shayna Johnston (verified owner) – July 12, 2022

These were fine although the screws on the two I ordered were rusty.
Rated 4 out of 5

Al Prohaska (verified owner) – July 10, 2022

This is what it is. It does exactly what its supposed to and its good to have a few of these in your kit. It saves lots of time if you have enough to have one of each type of cutting disc mounted and ready to go. There’s no downsite to owning at least 5 of these things
Rated 3 out of 5

Emie Dooley (verified owner) – June 15, 2022

I got this tool with my kit but didn’t know what was attached to it to make it work. I also didn’t know how to make it work since there was no instructions on it.