Dremel 1/32 in. Rotary Tool Multi-Pro Chuck
$11.44
A desirable companion for any applications that require frequent accessory changes, the Dremel 1/32 in. Multi-Pro Tool Chuck can be a handy supplement to your tool collection. Skip collet changes and swap out attachments on the fly with this tool chuck, which can house most 1/32 in. to 1/8 in. shank bits.
In stock
Description
A desirable companion for any applications that require frequent accessory changes, the Dremel 1/32 in. Multi-Pro Tool Chuck can be a handy supplement to your tool collection. Skip collet changes and swap out attachments on the fly with this tool chuck, which can house most 1/32 in. to 1/8 in. shank bits.
- Use with rotary tool models 4000, 400, 3000, 398, 395, 300, 285, 275, 200, 100, 8220, 8200, 800, 780, 770, 7700, 750
- Can be used with cordless Multi-Pro without changing collets
- Enables wrench-free attachment changes
- Also use with these Dremel instruments: 575 right angle attachment, 225 flex shaft attachment and 220 workstation
Additional information
| Weight | 0.06 lbs |
|---|---|
| Dimensions | 0.90 × 2.00 × 4.00 in |
| Accessory Fitment | Tool-Specific |
| Application Type | Cutting, Drilling, Grinding, Mortising, Polishing, Sanding, Scraping, Sharpening |
| Diameter (in.) | .25 in |
| Model | 4486 |
| Number of Pieces | 1 |
| Product Length (in.) | 1.5 in |
| Rotary Tool Accessory Type | Chuck |
| Tools Product Type | Power Tool |
Reviews (68)
68 reviews for Dremel 1/32 in. Rotary Tool Multi-Pro Chuck
Only logged in customers who have purchased this product may leave a review.
Related products
Rotary Tool Accessories
Dremel Rotary Tool WorkStation for Woodworking and Jewelry Making
Model# 220-01
Rotary Tool Accessories
Model# 225-01
Rotary Tool Accessories
Milescraft Rotary Tool Drill Press Stand for Woodworking and Jewelry Making
Model# 1097
Rotary Tool Accessories
Model# 9903
Rotary Tool Accessories
Model# 575
Rotary Tool Accessories
Dremel Rotary Tool Small Drill Bit Set for Metal (7 – Piece)
Model# 628-01
Rotary Tool Accessories
Dremel 7/32 in. Rotary Tool Grinding Stone for Sharpening Chainsaw Blades (2-Pack)
Model# 455
Rotary Tool Accessories
Dremel EZ Lock Rotary Tool Cut-Off Wheel Set for Metal and Plastic (11-Piece)
Model# EZ688-01
Myron Hand (verified owner) –
All my Dremel rotary tools, four of them, two corded and two rechargables, have one these. Got this one for the newest addition to the arsenal, another rechargable.
Ettie Rice (verified owner) –
Best accessory!!! Should make it standard equipment.
Garnett Padberg (verified owner) –
nice addition, just wish the drexel folks made it compatible with all tool-tip attachments (aka sometime you have to take it off…)
Hollie McDermott (verified owner) –
This thing is a time saver, but after use most bits seem to get stuck, requiring pliers and some rocking action to release. This can be an issue if you are in the field, far from other tools.IMO this thing should be part of the included Dremel kit
Jaycee Waters (verified owner) –
Makes changing accessories even easier
Allie Kautzer (verified owner) –
Game changer for those of us who use the dremel daily. Highly recommended
Una Langworth (verified owner) –
I carve wood and metals. Which means am changing bits quite often between cutting, roughing in, smoothing, buffing and final polish. Constantly having to use the small wrench to loosen, remove, then tighten again when changing different size collets for various size tools and bits in the past due slowed projects down, at times substantially With the chuck, my start/finish time on a project has been cut by at least 75%. Can change bits in seconds rather than minutes. The Chuck has presented no problems with loose bit[s], they stay centered and in place with just hand-tightening.
Dustin Block (verified owner) –
Exactly what it needed to be. Worked without issue as intended.
Jovani Nader (verified owner) –
This is by far the best thing you could possibly get it makes changing bits super easy no more key that always gets lost I will always use the keyless chuck as long as I use my dremel It’s a lifetime thing
Mara Hessel (verified owner) –
Great small tool, easy interchangeable for all bits.
Drake Jacobs (verified owner) –
This chuck is easy to install and very easy to use. It holds the tiny drill bits I use for jewelry making perfectly.
Woodrow Schneider (verified owner) –
It works for my necessity.
Fiona Lehner (verified owner) –
Good stuff
Samir Farrell (verified owner) –
Works great
Loyce Lakin (verified owner) –
THE CHUCK MAKES IT VERY EASY TO SWITCH OUT ALL DIFFERENT SIZES AND TYPES SO EASY….
Geovanni Torphy (verified owner) –
No more changing collets! Handy and easy to use! I bought one for every dremel I own!
Kamren Ritchie (verified owner) –
Excellent for when you have those small odd size holes to drill in your whatever. I have purchased two and both run true .
Kole Ziemann (verified owner) –
Nice to finally replace those annoying collets. Why don’t they just make this standard? Best 10 bucks I’ve spent in awhile.
Desiree Feeney (verified owner) –
Excellent gadget for my Dremel kit
Tabitha Wolff (verified owner) –
This chuck works great on my 3000 tool. It’s easy to use other size bits like the drill bits that Dremel offers.