Dremel 1/8 in. Rotary Tool Carbide Grout Removal Accessory Plus 1/16 in. Rotary Tool Carbide Grout Removal Accessory
$18.07
Develop a durable addition to your tool kit with this Dremel Rotary Tool Carbide Grout Removal Accessory Plus Rotary Tool Carbide Grout Removal Accessory.
In stock
Description
Turn your Dremel rotary tool into a fast, efficient grout removal tool. Our carbide grout removal bit gives you just the right amount of power to clean out grout lines so you can replace damaged tiles or update your grout. 1/8 In. steel shank. Ideal for replacing wall and floor grout or removing grout to replace broken tiles.
- Easily remove both wall and floor grout use with Dremel grout removal attachment
- High-speed cutter with a 1/8 in. steel shank
- 30° angle for controlled grout removal
- Guides 180° apart to keep bit centered
- Easy screw on mounting
- Excellent grout removal visibility
Additional information
| Weight | 0.03 lbs |
|---|---|
| Dimensions | 4.00 × 2.00 × 0.80 in |
| Accessory Fitment | Tool-Specific |
| Application Type | Cutting |
| Diameter (in.) | 0.125 in |
| Model | 570+569 |
| Number of Pieces | 1 |
| Product Length (in.) | 1.5 in |
| Rotary Tool Accessory Type | Rotary Bit |
| Shank Size | 1/8 in. |
| Tip Material | Carbide |
| Tip Shape | Straight |
| Used With | Ceramic |
Reviews (82)
82 reviews for Dremel 1/8 in. Rotary Tool Carbide Grout Removal Accessory Plus 1/16 in. Rotary Tool Carbide Grout Removal Accessory
Only logged in customers who have purchased this product may leave a review.
Related products
Rotary Tool Accessories
Model# 335-01
Rotary Tool Accessories
Model# 225-01
Rotary Tool Accessories
Dremel Rotary Tool Small Drill Bit Set for Metal (7 – Piece)
Model# 628-01
Rotary Tool Accessories
Model# 9901
Rotary Tool Accessories
Dremel 1/2 in. Rotary Tool 240-Grit Sanding Band for Hard Woods, Metals, and Plastic (6-Pack)
Model# 445
Rotary Tool Accessories
Model# 687-01
Rotary Tool Accessories
Dremel Rotary Tool Shaper/Router Table to Sand, Edge, Groove, and Slot Wood
Model# 231
Rotary Tool Accessories
Model# 4485
Joshua Collins (verified owner) –
Grout removal bit is overpriced however it does the job. Quality tool and look forward to learning all the tasks that can be performed with this. My recommendation on charging would be to have the “fuel gauge” on the charger. You have to guess when it is up to 3 lights (100%) or else take it back off the tool and stick it back in the charger for a little while longer. Small inconvenience though.
Jade Gusikowski (verified owner) –
It worked but didn’t last long
Palma Gislason (verified owner) –
Did good job to clean grout joint before grouting.
Isom Hilpert (verified owner) –
Carbide grout removal bit is fully functional and lasts what seems like forever. It has retained its sharpness and makes grout removal a lot easier than manual methods
Giuseppe Kub (verified owner) –
I wrote a 3 star review last month, and in all fairness, I think the job was too big for this removal bit. If you’re doing a tile replacement or other small tile job, it is more than adequate. I will echo what I read on other reviews – Run at low speeds and angle bit to use as much of the grinding area on the bit.
Rowan Streich (verified owner) –
Did the job clean and fast.
Maudie Kunze (verified owner) –
Worked better than anything I have ever tried for grout. Just have to be very careful not to hit the tile with it, it will chip/cut the tile.
Dane Grimes (verified owner) –
Drill bit works great. We removed the grout to regrout our bathroom. This made the job a whole lot easier to do!
Charity Hartmann (verified owner) –
Easy tool to work with. They do get dull and you have to put a little force behind it. Better to change the bit and use a new one. I went through 8 Bits doing a whole shower bath combination because the tip will break off with too much force
Xander Erdman (verified owner) –
Bit lasts about 30-60 minutes then it is pretty much done.
Greyson Moore (verified owner) –
Great little tool if you use correctly. Don’t use high speed and keep on a severe angle. Only complaint is they dull somewhat faster than I expected.
Clare Feeney (verified owner) –
The Dremel grout bits work great for removing grout. I am pleased with the speed and accuracy I can remove the grout. My only complaint is I wish the bit would not wear down so quickly.
Kiara Hirthe (verified owner) –
This Dremel bit worked well. We had tight grout lines and it powered through about 80 ft of grout. Edge held up well.
Crawford Sawayn (verified owner) –
Worked perfectly to remove areas of cracked grout & cleanup. Used Dremel motor with this bit, held at prox 60° angle. Some people had bit fracture, believe me, only because they would have held at too upright an angle. This is a great product !
Soledad Padberg (verified owner) –
While this little guy stays sharp and easily removes tough grout… if you get into a space thats a little too tight, the tip snaps off. However, thats kind of expected due to the size of it. Still giving it 5 stars.
Terrance Kassulke (verified owner) –
Works well for small grout removal jobs. I has no problem getting the tile up after using it.
Sanford Effertz (verified owner) –
This bit for my dremel tool is just the thing for me. I didn’t clean some (okay most) of the lines in the mats of hex tile I laid in the bathroom. Turns out I ought to have done so. This tool is a clean and effective way to ease the pain of coping with the trouble I caused myself. Highly recommended to keep your stress levels down.
Howard Schaden (verified owner) –
did an excellent job of removing adhesive between the small joints of my mosaic tile that came to the surface during installation of the panels.
Delaney Schiller (verified owner) –
Bits worked better then the Dremel tool itself.
Laurel Stokes (verified owner) –
Worked better than it would.