Dremel 1/8 in. Rotary Tool Glass Drill Bit for Glass, Ceramic Wall Tile, Glass Block, Glass Bottles, and Jewelry
$16.31
In stock
Description
This diamond-impregnated core-style bit features superior long life and is ideal for drilling in both flat and contoured surfaces. Diamond grit a full 360-degrees around the circumference of the bit allows it to be used in a rasping action to enlarge a hole if needed. Holes on the side of the bit allow the removal of glass dust from inside the bit. For use on glass, ceramic wall tile, glass block, glass bottles, jewelry.
- Drill holes in both flat and contoured glass
- Diamond-impregnated cutting bit for long life
- Diamond grit around the circumference of the bit allows it to rasp a larger hole if needed
- Holes on the side of the bit allow the removal of material
- Ideal for decorative projects including glass blocks or bottles
- Includes 662DR 1/8 in. glass drilling bit, instructions
Additional information
| Weight | 0.07 lbs |
|---|---|
| Dimensions | 1.29 × 1.95 × 3.95 in |
| Accessory Fitment | Tool-Specific |
| Application Type | Cutting |
| Diameter (in.) | 0.125 |
| Model | 662DR |
| Number of Pieces | 1 |
| Product Length (in.) | 1.77 in |
| Rotary Tool Accessory Type | Rotary Bit |
| Shank Size | 1/8 in. |
| Tip Material | Stainless Steel |
| Tip Shape | Cylinder |
| Tools Product Type | Power Tool |
| Used With | Glass or Porcelain |
Reviews (4)
4 reviews for Dremel 1/8 in. Rotary Tool Glass Drill Bit for Glass, Ceramic Wall Tile, Glass Block, Glass Bottles, and Jewelry
Only logged in customers who have purchased this product may leave a review.
Related products
Rotary Tool Accessories
Model# 9901
Rotary Tool Accessories
Dremel 1/2 in. Rotary Tool 120-Grit Sanding Bands for Wood, Fiberglass, Metal, and Rubber (6-Pack)
Model# 432
Rotary Tool Accessories
Model# 570
Rotary Tool Accessories
Dremel Rotary Tool Small Drill Bit Set for Metal (7 – Piece)
Model# 628-01
Rotary Tool Accessories
Model# 4486
Rotary Tool Accessories
Model# 687-01
Rotary Tool Accessories
Model# 1003
Rotary Tool Accessories
Model# 9903
Connor Muller (verified owner) –
This 1/8″ dia. diamond core drill worked perfectly, using a hand held variable speed Dremel Grinder operating at the mid-range RPM. The kiln fired glass artwork was submerged under water. Start the hole with the grinder and diamond drill at a 30 to 45 degree angle to break the glaze surface and then position the Dremel/diamond drill perpendicular to the work surface. The end results was excellent.
Benedict Waelchi (verified owner) –
I slumped some glass jars and drilled holes in them this afternoon. I was able to drill 12 1/2 holes before changing the bit. using my cordless Dremel tool, I created a cut in the glass for the hole, I held my drill at straight up and submerged each of the pieces into water and drilled through one piece at a time to finish.
Maverick Baumbach (verified owner) –
I have never been very successful at drilling glass; however, this bit has done the trick. I build wind chimes and use old abandoned glass insulators as the striker. In order to properly use the insulators, I must drill a small hole through the center so I can suspend the wind catcher. This drill bit has been successful where others have failed. I have drilled several insulators and it seems as new as ever.
Palma Stehr (verified owner) –
This is a good diamond bit for use in a Dremel tool. It’s not the fastest cutting bit I’ve used, but using the included cutting oil helps a little. I actually found it worked better with my drill so I could put more pressure on it. I had to cut 6 holes in ceramic wall tiles and needed them to be a little bigger than it’s 1/8″ diameter and the nice thing about diamond bits that have lots of diamond around the shaft is you can wobble it to make thew hole a little bigger.