Carbon Motor Brushes (for 100, 200, 275, 285, 300, 395, 595, and 6000) (Type 4, 5, 6 and 1,2) One pair of motor brushes. For use with Dremel rotary tool model(s): 100, 200, 275, 285, 300, 395 and 595 (Type 4, 5 & 6). And Dremel contour sander 6000 (Type 1 & 2).
- You should check both motor brushes after every 50-60 hours of use simply unplug the tool, open the brush caps and remove the carbon piece from the holder If there is less than 1/8 in. of carbon left on either brush, they both should be replaced
- We offer a variety of motor brushes, but you should only use the motor brush that is compatible with your tool
- 2 motor brushes are included in each pack
- Motor brushes consist of a coiled spring of metal with a piece of carbon at the end they go under the brush cap and rest on the armature, providing the electrical connection to keep the tool running
Norwood Gusikowski (verified owner) –
Took five minutes to replace these motor brushes. Five dollars in parts saved a seventy dollar Dremel tool!!!
Chasity Kessler (verified owner) –
All good nothing bad
Tyshawn Prohaska (verified owner) –
Fit a 395 dremel. My dremel would only turn on if I pressed hard on the brush screws, the problem was not the brushes but rather the internal contacts. Expensive for simple brushes
Davion Breitenberg (verified owner) –
These did fit my Dremel 4000. Got me back up and running
Louvenia Champlin (verified owner) –
Works but wears fast
Howell Lemke (verified owner) –
Fit and works perfectly
Rowland Mitchell (verified owner) –
Works as expected
Misty Smith (verified owner) –
Well manufactured and fitted perfectly!
Lily Cassin (verified owner) –
Perfect fit for my Dremel 395. Wasn’t working at all until the carbon brushes were replaced.
Myrtice Daniel (verified owner) –
Very good
Ophelia Zboncak (verified owner) –
It was easy to Assemble. I have had my Dremel for over five years I am so happy that Home Depot had what I was looking for and now I can use my Dremel for years to come.
Geraldine Champlin (verified owner) –
simple install and i am up and running.
Enos Parisian (verified owner) –
works good
Karolann O’Keefe (verified owner) –
Exact replacement for my old Dremel. I had to chip out the old brushes, which had melted, but that’s another story. Bottom line: this old tool is usable again. That’s better in a bunch of ways than just throwing it out.
Devyn Ryan (verified owner) –
Just as described works perfectly
Kennedi Daniel (verified owner) –
Fit my 3000 model
Tyra Bergstrom (verified owner) –
OEM replacement works great!
Jermain Ratke (verified owner) –
Brought tool back to life. Quick delivery outstanding. Thanks HD.
Quinton Reilly (verified owner) –
They are original Dremel product; 2 per package. Fit perfectly and good price.
Gregory Doyle (verified owner) –
Perfect replacement, saved me from buying a new Drexel