Dremel 1/8 in. Rotary Accessory Rectangle-Shaped Tungsten Carbide for Steel, Stainless Steel, Iron, Ceramics, and Hard Wood
$12.97
Remove hard materials with Dremel Rectangle-Shaped Tungsten Carbide Cutter for Steel, Stainless Steel, Iron, Ceramics, Plastics and Hard Wood.
In stock
Description
The Dremel 9901 is a tungsten carbide cutters are ideal for shaping, smoothing or removing material from especially hard materials. Shapes, smooth’s or grinds especially hard materials including: hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics and hard woods.
- High speed cutter made of tungsten carbide
- Hardest material next to diamonds
- Shapes, smoothest, removes hard material
- Do not run in excess of 30,000 RPM
- Screw-free design for easy locking and loading
- A high-speed cutter made of tungsten carbide, the hardest material next to diamonds
- Bit diameter: 1/8 in.
- Shank diameter 1/8 in., 3.2 mm
Additional information
| Weight | 0.03 lbs |
|---|---|
| Dimensions | 0.60 × 2.00 × 4.00 in |
| Accessory Fitment | Tool-Specific |
| Application Type | Cutting |
| Diameter (in.) | 0.13 |
| Model | 9901 |
| Number of Pieces | 1 |
| Product Length (in.) | 3 in |
| Rotary Tool Accessory Type | Rotary Bit |
| Shank Size | 1/8 in. |
| Tip Material | Carbon Steel |
| Tip Shape | Rectangle |
| Tools Product Type | Power Tool |
| Used With | Ceramic, Hard Metals, Plastic, Sheet Metal, Soft Metals, Stainless Steel, Wood |
Reviews (71)
71 reviews for Dremel 1/8 in. Rotary Accessory Rectangle-Shaped Tungsten Carbide for Steel, Stainless Steel, Iron, Ceramics, and Hard Wood
Only logged in customers who have purchased this product may leave a review.
Related products
Rotary Tool Accessories
Model# 569
Rotary Tool Accessories
Dremel 3/8 in. Rotary Tool 120-Grit Sanding Flapwheel for Wood, Rubber, Plastic, and Metal
Model# 503
Rotary Tool Accessories
Model# 4485
Rotary Tool Accessories
Dremel 1/8 in. Rotary Tool Steel Tile Cutting Bit for Ceramic Tile
Model# 562
Rotary Tool Accessories
Model# 4486
Rotary Tool Accessories
Model# 1003
Rotary Tool Accessories
Model# 335-01
Rotary Tool Accessories
Dremel 1/2 in. Rotary Tool 120-Grit Sanding Bands for Wood, Fiberglass, Metal, and Rubber (6-Pack)
Model# 432
Hannah Breitenberg (verified owner) –
This cutter really made life much easier. Very powerful with smooth results.
Edythe Durgan (verified owner) –
The drill was expensive but did the job easily. Would buy agaibn.
Santina Bergstrom (verified owner) –
Good product. Works well.
Price Lueilwitz (verified owner) –
Works great and fast cutting. A good add to my collection of bits
Eda Beahan (verified owner) –
Been useing this carbide cutter for 2-3 years on die cast zinc and is syill sharp.
Osvaldo Daugherty (verified owner) –
In my experience, this is a great bit for cutting metal. I used it to cut out a trailing arm bushing from my vehicle and it preformed great. I was certain it would be destroyed, but hardly looks worn.
Samara Vandervort (verified owner) –
it is very sharp and did the job very well.
Waylon Koch (verified owner) –
I have used this bit for making holes in my ceramic pots. Have also used it for carving designs on these pots. Great bit to have.
Rhea Bartell (verified owner) –
This is my go-to cutter. I have probably purchased 4 of them over the years but keep on losing them because the Dremel plastic cases have poor clear plastic lids and the cutters fall out. I can cut metal, wood and plastic without the cutter dulling.
Clay Koelpin (verified owner) –
Does the work right. Very tough, good grinding properties.
Gunner Renner (verified owner) –
I used it in a cordless drill to shave a small, hard to reach, section of wood. Chewed through quickly.
Quinn Crona (verified owner) –
Great tool got job done
Bruce Ziemann (verified owner) –
does what it is meant to do. wanted it for Dremel plunge cutting’ but it is flat none cutting end .which I had assumed . my fault I assume..
Arely Beier (verified owner) –
I bought this a week ago. I needed to take a rusted nut off of a sway bar link end … ya, that’s right. You know what I’m talking about. I used the bit to flatten the shaft of the old ball joint SO THAT I could snap a pair of vice grips on it SO THAT it wouldn’t twist while heaving on the rusted-on nut. It worked! Most importantly, the bit chewed off the steel to create the flattened surfaces I was looking to create. Limited space. Chewed it away like a cheese grater. This bit eats through steel. I’m going to try it for cutting away rusted steel for body work next. I’m imagining it will work even slicker for that application.
Tomasa Kemmer (verified owner) –
Ok
Brionna Kiehn (verified owner) –
I bought this last week and used it to cut thru hardened steel sheeting with very limited space. It worked well, but cut thru in VERY tiny pcs. (be sure to wear gloves and glasses, grit goes everywhere!). This works well, but slowly, take your time, it works!.
Loren Thiel (verified owner) –
Finally got to use the cutter on a small project, it worked as well as I had expected it to .
Kirk Muller (verified owner) –
The tip doesn’t cut so plunging was difficult. The edges worked fine.
Leo Altenwerth (verified owner) –
Must have for grinding a metal product. I use it on doors when the latch is sticking.
Barton Turcotte (verified owner) –
Chewed through the steel garage door rail quickly. Seemed exactly as sharp afterward. I believe this is genuine tungsten carbide. I had read some reviews on other sites from people who seemed to be getting generic, inferior products. This came sealed in Dremel packaging, but the real test was in the using it and it passed with flying colors. Glad I bought from Home Depot.