Dremel 1/8 in. Rotary Accessory Rectangle-Shaped Tungsten Carbide for Steel, Stainless Steel, Iron, Ceramics, and Hard Wood
$12.97
Remove hard materials with Dremel Rectangle-Shaped Tungsten Carbide Cutter for Steel, Stainless Steel, Iron, Ceramics, Plastics and Hard Wood.
In stock
Description
The Dremel 9901 is a tungsten carbide cutters are ideal for shaping, smoothing or removing material from especially hard materials. Shapes, smooth’s or grinds especially hard materials including: hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics and hard woods.
- High speed cutter made of tungsten carbide
- Hardest material next to diamonds
- Shapes, smoothest, removes hard material
- Do not run in excess of 30,000 RPM
- Screw-free design for easy locking and loading
- A high-speed cutter made of tungsten carbide, the hardest material next to diamonds
- Bit diameter: 1/8 in.
- Shank diameter 1/8 in., 3.2 mm
Additional information
| Weight | 0.03 lbs |
|---|---|
| Dimensions | 0.60 × 2.00 × 4.00 in |
| Accessory Fitment | Tool-Specific |
| Application Type | Cutting |
| Diameter (in.) | 0.13 |
| Model | 9901 |
| Number of Pieces | 1 |
| Product Length (in.) | 3 in |
| Rotary Tool Accessory Type | Rotary Bit |
| Shank Size | 1/8 in. |
| Tip Material | Carbon Steel |
| Tip Shape | Rectangle |
| Tools Product Type | Power Tool |
| Used With | Ceramic, Hard Metals, Plastic, Sheet Metal, Soft Metals, Stainless Steel, Wood |
Reviews (71)
71 reviews for Dremel 1/8 in. Rotary Accessory Rectangle-Shaped Tungsten Carbide for Steel, Stainless Steel, Iron, Ceramics, and Hard Wood
Only logged in customers who have purchased this product may leave a review.
Related products
Rotary Tool Accessories
Model# 335-01
Rotary Tool Accessories
Model# 569
Rotary Tool Accessories
Dremel 7/32 in. Rotary Tool Grinding Stone for Sharpening Chainsaw Blades (2-Pack)
Model# 455
Rotary Tool Accessories
Model# 9903
Rotary Tool Accessories
Dremel 1/2 in. Rotary Tool 60-Grit Sanding Bands for Wood, Fiberglass, Rubber, and Metal (6-Pack)
Model# 408
Rotary Tool Accessories
Dremel Rotary Tool Sanding/Grinding Accessory Set (31-Piece)
Model# 686
Rotary Tool Accessories
Model# 687-01
Rotary Tool Accessories
Dremel Rotary Tool Shaper/Router Table to Sand, Edge, Groove, and Slot Wood
Model# 231
Shania Mante (verified owner) –
Was used to cut a seized bearing outer race by making one cut through and collapsing the old bearing. Cut nicely. Hopefully is still good for another use.
Shawna Lueilwitz (verified owner) –
Stays sharp and cuts through practically anything. I use it mainly on 1/4″ thick (or thinner) mild steel and various other metals, and it works great. I’ve used it both in my rotary tool and in my drill press. Either works, but you still have to be careful not to twist too much or else it will break (it is carbide, after all).
Garret Schulist (verified owner) –
Perfect
Gabriel Schroeder (verified owner) –
I had to enlarge a hole on my snowplow. This cutter looks like a joke but I put it in my Dremel and it worked great. I am surprised at how well it cut and is still cutting.
Maymie Kshlerin (verified owner) –
Used this to modify a chainsaw bar to adapt to a vintage saw. Worked well.
Betty Johnston (verified owner) –
I am a locksmith and use these tools to “adjust” lock strikes where doors have settled or were not installed properly. These tools last for years and will cut almost anything, including stainless steel. If you have a tough material to cut or anything less, this tool will do the job.
Ron Braun (verified owner) –
Cuts easily with minimal pressure.
Roxanne Cassin (verified owner) –
worked well on vinyl
Cleve Gislason (verified owner) –
This cutter works great. I weld and then use these to reshape. They seem to last forever. I go through a few only because I loose them. Great tool.
Whitney Balistreri (verified owner) –
The product did better than I expected in grinding out a hug that had debre left in it from a bearing race that had melded to the hub. Had never used a drimel tool, borrowed my brothers, bought the grinding tool and it was fantastic. As a new user I wish the package had more explanation as to what tools are used for and on what materials to be used.
Carmella Blanda (verified owner) –
The bit was very useful while I did not need to rent a tile cutter. It held up and glided through the ceramic tiles and grout. It is an excellent tool to have in your toolbox.