Dremel High Performance 9901 Carbide Cutter
$11.97
This spectacular Dremel High Performance Carbide Cutter is best suitable for carving and engraving in hardened steel, cast iron or more. Offers high speed.
In stock
Description
Dremel’s line of Max Life High-Performance accessories provides long-lasting performance and impressive durability. Built to give Doers longer lasting, stronger performing, versatile accessories. Find exclusively at The Home Depot.
- 2X longer life compared to 9901
- High-speed bit made of tungsten carbide, the hardest material next to diamonds
- Use higher speeds for hard woods, slower speeds for metals and very slow speeds for plastics
- Exclusively sold at the home depot
Additional information
| Weight | 0.1 lbs |
|---|---|
| Dimensions | 0.75 × 2.00 × 4.00 in |
| Accessory Fitment | Tool-Specific |
| Application Type | Cutting |
| Diameter (in.) | 0.125 in |
| Model | 9901HP |
| Number of Pieces | 1 |
| Product Length (in.) | 0.125 in |
| Rotary Tool Accessory Type | Rotary Bit |
| Shank Size | 1/8 in. |
| Tip Material | Carbide |
| Tip Shape | Cylinder |
| Tools Product Type | Power Tool |
| Used With | Hard Metals, Plastic, Sheet Metal, Soft Metals, Wood |
Reviews (26)
26 reviews for Dremel High Performance 9901 Carbide Cutter
Only logged in customers who have purchased this product may leave a review.
Related products
Rotary Tool Accessories
Model# 575
Rotary Tool Accessories
Model# 7144
Rotary Tool Accessories
Dremel 3/8 in. Rotary Tool Aluminum Oxide Arch Shaped General Purpose Grinding Stone
Model# 952
Rotary Tool Accessories
Dremel 3/8 in. Rotary Tool 120-Grit Sanding Flapwheel for Wood, Rubber, Plastic, and Metal
Model# 503
Rotary Tool Accessories
Model# 9903
Rotary Tool Accessories
Dremel 1/2 in. Rotary Tool 60-Grit Sanding Bands for Wood, Fiberglass, Rubber, and Metal (6-Pack)
Model# 408
Rotary Tool Accessories
Dremel Rotary Tool WorkStation for Woodworking and Jewelry Making
Model# 220-01
Rotary Tool Accessories
Dremel 1/2 in. Rotary Tool 120-Grit Sanding Bands for Wood, Fiberglass, Metal, and Rubber (6-Pack)
Model# 432
Guiseppe Braun (verified owner) –
I haven’t used this type of bit before, but it works really well. It cuts cleanly and smoothly, with little to no wear on the bit. It works really well for what it was built for.Dremel has provided me this product in exchange for an honest review.
Jazmin Lesch (verified owner) –
Been working on a xmas gift for wife and i keep going threw bits carving into a peice of metel and then i heard of this one and it is great
Keith Olson (verified owner) –
1/8th sharp upcutting bit, very nice and accurate.
Leanne Strosin (verified owner) –
This cutter did want I wanted it to do. Itis better to use it with a slower speed so heat doe not burn it and dull it.
Helene Terry (verified owner) –
From the moment this tool arrived, I knew what I would use it for. I am currently working on personalized engraved cutting boards, and I immediately chucked it into my 3018 PROver CNC machine. It performed flawlessly. The MAX RPM on my machine is 22,000, the MAX RPM on this tool is 35,000 so I knew there wouldn’t be any issues with using this bit in my CNC machine. I highly recommend this bit, whether in my Dremel tool, or in my CNC machine this bit is awesome!Dremel has provided me this product in exchange for an honest review
Mazie Lesch (verified owner) –
Great bit, I would definely practice on scrap material before jumping into your project if you don’t have experience using this bit. Ask me how I know? Very good carving but aggressive bit. I look forward to trying on several different substraits and trying different techniques. Nice strong bit and I expect it to last a while. Dremel has provided me this product in exchange for an honest review.
Stan Langosh (verified owner) –
Dremel has provided me this product in exchange for an honest review.This little guy easily cuts through sheet metal! I tried to cut a small groove through a piece of wood, but the cut was not as clean as my router. May not be the intended purpose, but I already had my Dremel out and wanted to try this bit.When I get more time, I’ll experiment on other metals in my garage.
Leonie Koepp (verified owner) –
It worked great, used it on a metal case. Had a good finish. It does seem pretty sturdy.Dremel has provided me this product in exchange for an honest review.
Magdalena Runte (verified owner) –
I used this bit to cut through some aluminum sheeting for a project I am working on for my home workshop. The trick is to go slow and steady – I was amazed I could cut through the sheet metal with my Dremel. Dremel has provided me this product in exchange for an honest review.
Cedrick Lakin (verified owner) –
Great bit for tile and metal work in bathroom plumbing installs, metal door frame to door latch adjustments and numerous other similar applications where removal of small amounts of materials can make a job easier.
Carey Stracke (verified owner) –
Dremel has provided me this product in exchange for an honest review. This bit is very durable. I’ve tested it on wood, marble and steel, and it maintained its sharpness without showing any signs of dulling. If this is the type of cutting bit you use, this would be the best bit you can own. Worth the extra money!
Ulises Donnelly (verified owner) –
I needed to cut through an 18mm class 8 hex nut that had seized, in order to remove it. This bit cut through it like a warm knife through frozen butter; slow but steady progress. I had the nut removed in about 1.5 hours. It worked great.
Zackery Kohler (verified owner) –
Perform task as expected and with no problem
Ludie Bartoletti (verified owner) –
This carving bit cut and carved wood dowel, aluminum sheet and PVC plastic well and pretty aggressively. Given the Tungsten Carbide formulation I imagine it will continue to do so for quite a long time given my needs, so its a good investment. I do suggest you cut slowly and not apply too much force, or the bit could grab and kickback, as I was able to demonstrate! Given the spiral design it can also pull out of the collet, so make sure you’ve tightened it well.I generally prefer a carving bit with a tip cutting capability, so this will take some practice. Dremel has provided me this product in exchange for an honest review.
Rhiannon Veum (verified owner) –
I was surprised how well this bit engraved my tile trivet. I was expecting it to slip and slide on the tile, but it held true. At an angle, it gave me a precision edge to cut the fine details on the trivet. I also, used it to carve a wood shuttle and engrave a copper bracelet. Dremel has provided me this product in exchange for an honest review.
Karson Flatley (verified owner) –
This is a very aggressive little bit. I had some 1/2″ bolts that were cut & the ends were pointy. Used this bit to smooth/round the ends. At first it was tough controlling it but once I got the hang of it everything went well & it did a great job. Dremel has provided me this product in exchange for an honest review.
Melba Bartoletti (verified owner) –
Dremel has provided me this product in exchange for an honest review.The Tungsten Carbide Carving bit is indeed a hard worker and great choice for quick and easy cutting of wood,laminates, plastic Aluminum, brass, stone and yes even ceramic and glass. And will run at 18,000 to 35,000 RPM for different materials.I used it on a wood project under way and tried it on a stone, aluminum and glass waiting to be a projects.It worked well on all. Just remember to not put too much pressure trying to hurry it as it will kickback and could be a problem for you.A Great choice for crafts and hobby’s.
Lenore Schuppe (verified owner) –
It cuts well and is moderately durable
Maude Bradtke (verified owner) –
This is a great engraver for woid and metal. Great size. Loved it in my crafting. Great addition to my engraving bit collection and versatile. Dremel has provided me this product in exchange for an honest review.
Rae Simonis (verified owner) –
I couldn’t find a tapered carbide bit for my drill or air grinder so I thought I’d give this a try. I used it in my cordless drill and it did an amazing job.